InFocus LP 815 Use and care manual

Other manuals for LP 815

3

This manual suits for next models

1

Table of contents

Other InFocus Projector manuals

InFocus

InFocus LP340 Operating instructions

InFocus

InFocus LP280 Guide

InFocus

InFocus IN1100 Series User manual

InFocus

InFocus SP4805 Manual

InFocus

InFocus LP720 User manual

InFocus

InFocus CEILING MOUNT LP 1000 SERIES User manual

InFocus

InFocus LP 240 User manual

InFocus

InFocus IN2112 User manual

InFocus

InFocus LASER PROJECTOR LP 540 User manual

InFocus

InFocus in1144 User manual

InFocus

InFocus CEILING MOUNT LP 1000 SERIES User manual

InFocus

InFocus SP7205 Quick start guide

InFocus

InFocus IN5132 User manual

InFocus

InFocus Work Big IN1100 User manual

InFocus

InFocus IN8606HD User manual

InFocus

InFocus LP335 DRAGONFLY User manual

InFocus

InFocus IN5122 Instruction Manual

InFocus

InFocus OverView 410P User manual

InFocus

InFocus IN116a User manual

InFocus

InFocus IN1110 User manual

InFocus

InFocus in2100 Series User manual

InFocus

InFocus LP630 User manual

InFocus

InFocus LP 70+ User manual

InFocus

InFocus SCREEN PLAY 7205 User manual

Popular Projector manuals by other brands

iEmmet

iEmmet MP-312 user manual

Epson

Epson VS400 Specifications

Sony

Sony VPL-HS10 Marketing Specifications & Features manual

Sony

Sony VPL-HW65ES Quick reference manual

Toshiba

Toshiba TLP-791U Specifications

Philips

Philips LC1341 Declaration of conformity

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB operating instructions

NEC

NEC NP600S EDU Specifications

BenQ

BenQ SH753P user manual

Eiki

Eiki EK-623U series quick start guide

Epson

Epson PowerLite Pro Cinema 6020UB user guide

Epson

Epson PowerLite Home Cinema 705HD user guide

Christie

Christie LHD700 user manual

Navitar

Navitar FX instruction manual

Sony

Sony SRX-R815P operating instructions

Vivitar

Vivitar DP1500 X specification

Acer

Acer C20 Series manual

Asus

Asus ZenBeam Latte user manual

Replacing the projection lamp

The lamp hour timer in the About menu counts the number of hours the

lamp has been in use. Fifty hours before the specified end of the lamp’s life,

the message “Replace lamp” briefly appears on the screen at each startup

and in the Interactive Display. After 50 additional hours, the lamp will no

longer light.Youcan order newlampmodules fromyourdealer.

1Turn off the projector and unplug the power cable.

2Wait 60 minutes to allow the projector to cool thoroughly.

3Turn the projector upside down and remove the lamp door by removing

the two screws and sliding the lamp door tabs out of the two tab bays.

4Loosen the three captive screws on the lamp module.

About menu

computer 2

network

audioin

L

computer in

trigger

monitor out

serial control

R

audioin

computer 1

USB

mouse

computer 3

I

O

turn off and unplug

the projector

wait 60 minutes

remove the screws on lamp door

loosen the screws on lamp module

WARNINGS:

• To avoid burns, allow the projector to cool for at least 60 minutes before

you replace the lamp.

• Do not drop the lamp module. The glass may shatter and cause injury.

• Do not touch the glass lamp screen. Fingerprints can obscure projection

sharpness.

• Be extremely careful when removing the lamp housing. In the unlikely

event that the lamp ruptures, small glass fragments may be generated.

The lamp module is designed to contain most of these fragments, but

use caution when removing it.

5C arefully remove the lamp module by grasping and lifting the metal

bail wire. Dispose of the lamp in an environmentally proper manner.

6Install the new lamp module, making sure that it is properly seated.

7Tighten the three screws.

8R eplace the lamp door by inserting the tabs into the tab bay s and tight-

ening the two screws.

9Plug in the power cable, press the power sw itch then press the Power

button to turn the projector back on.

10 R eset the lamp hour timer.

Resetting the lamp timer

Toresetthelamptimer,pressthedecrease volume button on the keypad

andthentheincreasevolumebuttonwithin 3 seconds.

AtthatpointtheLEDwillturngreenandyoucanpoweron the projector.

You can also navigate to the Settings>Service menu and select Lamp Reset

to reset the lamp timer.

remove module using bail wire

reset lamp time in Service menu