Influencer INVRGB14K User manual

INVRGB14K

FEATURES

• Tripod 73cm-210cm

• LED Ring Light

• Single and Double Phone Mount

• Microphone Arm

• Wireless Selfie Remote

• Lighting Remote Control

• Cold shoe adaptor

Welcome to the #influencer

14 Inch RGBW Ring Light Kit.

Let’s get you up to speed so

you can start creating great

content!

*Ring light is 14 inch high as measured from

mounting point to top of the ring.

14 INCH RGBW

RING LIGHT KIT

WITH TRIPOD

ASSEMBLY

Assembly of the 14 Inch RGBW Ring Light Kit is broken down into 5 sections:

tripod, ring light, phone mount, microphone mount and camera mount.

SECTION 1: TRIPOD

1. Take the folded tripod out of the packaging (Fig. 1).

2. Loosen the base adjustment screw (Fig. 2).

3. Use your hands to gently pull the legs outwards from the centre shaft

(Fig. 3 & 4).

4. Adjust the legs until stabilising bars are parallel with the ground. Then

tighten the base adjustment screw.

5. Loosen the pole screws to extend to your desired height. Then tighten

once height is confirmed (Fig. 5 & 6).

INCLUDED

1 x 8 Inch ring light

1 x Camera mount

1 x Phone mount

1 x Microphone mount

1 x Dual phone bracket

Stabilising bars

SECTION 2: RING LIGHT

1. Remove the assembled ring light from packaging.

2. Pull down the base mount of ring light so that one of the adjustment screws

is lower than the other (Fig. 1).

3. You can tilt the ring light by loosening the top adjustment screw and then

tightening once the ring light is in the desired position (Fig. 3).

1 2 3

B. Dual phone mounting:

1. Attach the plastic clamp to the tripod by loosening the adjustment screw (rotate

anti-clockwise) and place around the tripod pole. Once in place, tighten the clamp

by rotating the adjustment screw clockwise.

2. Attach the phone mounts to the bracket by screwing the two adjustment screws

into the phone mounts.

3. To insert your smart phones into the mounts, pull the spring-loaded side on each

mount. You may need to remove your phone case for secure insertion into the

phone mount.

SECTION 3: PHONE MOUNT

There are multiple phone mounting options in this kit.

A. Centre ring mounting:

1. Insert the phone metal mount onto the ring light and tighten the base adjustment

ring clockwise to secure (Fig. 1).

1 2

SECTION 4: MICROPHONE MOUNT

1. Unscrew and pull out bottom adjustment screw, then attach mount to top of

tripod. Re-insert adjustment screw and tighten with adjustment ring until

mount is secure (Fig. 2).

2. Unscrew bottom adjustment screw, then attach mount to top of tripod.

Re-insert adjustment screw and tighten with adjustment ring until mount is

secure (Fig. 2).

3. Attach the microphone arm to the thinnest part of the tripod (Fig. 4 & 5).

4. The microphone arm can be moved up and down by loosening and tightening this

screw (Fig. 6).

5. The microphone arm can be adjusted on the tripod by loosening and tightening this

bolt (Fig. 7).

6. To attach the microphone mount to the microphone arm remove cap from end of

microphone arm, then attach microphone mount and screw clockwise until secure

(Fig. 8A & 8B).

7. Squeeze the microphone mount clamp to open and then attach your microphone

(Fig. 9). A cable management clip is included for your microphone if required.

1A 1B 2

3A 3B

4 5

Microphone

mounts to

skinniest part

of tripod

6 7 8A 8B

SECTION 6: WIRELESS SELFIE

REMOTE

1. Push the camera button on the

remote to switch it on.

2. Once the green light ashes, open

BT® connections/settings on your

smart phone. Refer to your user

manual for instructions on pairing

and connecting wireless devices.

3. Select #Inuencer from the wireless

device list. The green light should

stop ashing once your device has

successfully connected to the

remote.

4. To take a sele with the remote, open

the camera on your smart phone and

press the camera button on the

remote to take the photo.

SECTION 5: CAMERA MOUNT

1. Attach the metal camera mount

to the camera base first.

2. Attach the camera base to the

ring by screwing the camera onto

the mount.

Note: Don't over extend the

microphone arm otherwise

you risk tipping the tripod over.

Don't extend past 2/3.

RF REMOTE FUNCTION INSTRUCTION (from top to down, from left to right)

Power on /off Switch for dual colour modes

Brightness down Dual white colour modes - brightness down

Brightness up Dual white colour modes - brightness up

Cold white light Cold white light mode

Mixed white light Mixed white light mode

Warm white light Warm white light mode

Power on / off Turn on RGB color modes

AUTO Cycle through RGB color modes automatically, each mode will last 20 seconds

M+ Next RGB mode

M- Last RGB mode

S+ Speed up

S- Speed down

Brightness up Brightness up

Brightness down Brightness down

Lock button Pause/continue the dynamic RGB modes (13 modes)

Setting button Pair the RGB ring light (by pressing and holding the setting button for 3 seconds. The indicator light will flash

3 times when successfully paired).

W button RGB modes - White light mode

RED button RGB modes - Red light mode

Green button RGB modes - Green light mode

Blue button RGB modes - Blue light mode

Brightness levels 8 Levels (dual white light modes have 9 brightness levels)

Speed levels 8 Levels (for dynamic RGB modes)

Total RGB modes 13 Static modes+ 13 dynamic modes, total 26 modes

Memory function When restart the ring light, it will be on the mode you used last time

Mode Description Mode Description

1 Dynamic mode - Rainbow colour change 14 Static mode- Red

2 Dynamic mode - Red, blue, green, yellow purple and cyan colour change 15 Static mode- Orange

3 Dynamic mode - Red and green fading and rotating 16 Static mode- Yellow

4 Dynamic mode - Green and blue fading and rotating 17 Static mode- Dark green

5 Dynamic mode - 6 Colours fading and rotating with white background 18 Static mode- Green

6 Dynamic mode - Red 19 Static mode- Sky blue

7 Mixed colors mode 20 Static mode- Cyan blue

8 Dynamic mode - Red, yellow, white and purple colour change 21 Static mode- Light blue

9 Dynamic mode - Red and blue warning light 22 Static mode- Blue

10 Dynamic mode - 6 Colours jump changing 23 Static mode- Light purple

11 Dynamic mode - 6 Colours breathing 24 Static mode- Purple

12 Dynamic mode - Red background and blue light rotating 25 Static mode- Pink

13 Dynamic mode - White background and green light rotating 26 Static mode- White

RGB Ring light modes& RF REMOTE Main functions

1711/

Influencer™

PO Box 5658 Brendale QLD

Australia 4500

Customer Support 1800 812 261

WARNINGS: READ BEFORE USING

Photosensitivity / epileptic seizures:

A very small percentage of individuals may experience epileptic seizures when exposed to

certain light patterns or flashing lights. Exposure to certain patterns or backgrounds on a

computer screen, may induce an epileptic seizure in these individuals. Certain conditions may

induce previously undetected epileptic symptoms even in persons who have no history of prior

seizures or epilepsy. If you, or anyone in your family, have an epileptic condition, consult your

physician prior to using. If you experience any of the following symptoms while using the

product -- dizziness, altered vision, eye or muscle twitches, loss of awareness, disorientation,

any involuntary movement, or convulsions - IMMEDIATELY discontinue use and consult your

physician before resuming using.

Speciﬁcations

Power: 12W,15V/2-3A

Working temperature: about 45°

Housing material: ABS

Light cover: PC

Light temperature: 2700-7000K

162 White LED's

64 RGB LED's

26 RGB Modes with 8 levels of brightness

White modes: cold / warm / mixed with 9 levels of brightness

Table of contents

Other influencer Camera Accessories manuals

influencer

influencer INVLTPK8 User manual

influencer

influencer INVLOGTL User manual

influencer

influencer INVLTPK14 User manual

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions

influencer INVRGB14K User manual

Popular Camera Accessories manuals by other brands