Infinova V1405-7 Installation instructions

V1405 Series

Indoor/Outdoor Small Housing

Installation/Operation Instructions

Notice

This manual may not be reproduced in any form or by any means used to create any

derivative such as translation, transformation, or adaptation without the prior written

permission of Infinova.

Infinova reserves the right to change this manual and the specifications without prior notice.

The most recent product specifications and user documentation for all Infinova products are

available on our web site www.infinova.com

Trademarks

Infinova®is a trademark of Infinova.

Contents are subject to change without prior notice. Infinova and its logo are registered

trademarks of Infinova. All other trademarks that may appear belong to their respective

proprietors.

FCC Warning

V1405 series Indoor/Outdoor Small Housing complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions.

zThis device may not cause harmful interference.

zThis device must accept any interference received, including interference that may cause

undesired operation.

The V1405 has been tested and found to comply with the limits for Class A digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a residential

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a

particular installation.

Read this manual carefully before installation. This manual should be saved

for future use.

Important Safety Instructions and Warnings

zElectronic devices must be kept away from water, fire or high magnetic radiation.

zClean with a dry cloth.

zProvide adequate ventilation.

zUnplug the power supply when the device is not to be used for an extended period of

time.

zOnly use components and parts recommended by manufacturer.

zPosition power source and related wires to assure to be kept away from ground and

access way.

zRefer to qualified personnel for all service matters.

zSave product packaging to ensure availability of proper shipping containers for future

transportation.

Indicates that the un-insulated components within the product may carry a voltage

harmful to humans.

Indicates operations that should be conducted in strict compliance with instructions

and guidelines contained in this manual.

Warning: To avoid risk of fire and electric shock, keep the indoor product away

from rain and moisture!

Table of Contents

Chapter I General Description.......................................................................................1

1.1 Overview .............................................................................................................1

1.2 Models .................................................................................................................1

1.3 Features................................................................................................................1

1.4 Specifications ......................................................................................................1

1.5 Packing ................................................................................................................3

Chapter II Installation ....................................................................................................4

Chapter III Operation.....................................................................................................5

Chapter I General Description

1.1 Overview

V1405 series Indoor/Outdoor Small Housings are used with pan/tilt units or fixed mounts.

The housings are constructed of aluminum; you can install cameras with either fixed focal or

vari-focal lenses. V1405 series housings have adjustable camera sleds to accommodate

different sizes of cameras and lenses.

1.2 Models

V1405-7 Camera housing, indoor/outdoor, 7" internal

V1405-7S Camera housing, indoor/outdoor, 7" internal, w/ sun shield

V1405-7SH Camera housing, indoor/outdoor, 7" internal, w/ sun shield & heater

V1405-10 Camera housing, indoor/outdoor, 10" internal

V1405-10S Camera housing, indoor/outdoor, 10" internal, w/sun shield

V1405-10SH Camera housing, indoor/outdoor, 10" internal, w/ sun shield & heater

V1405-10SHB Camera housing, indoor/outdoor, 10" internal, w/ sun shield, heater &

blower

1.3 Features

zIndoor/outdoor installations

zSpring assisted forward opening lid

zRear lock connection

zAluminum construction, available in both 12.75″and 15.75″

zIP66 standard

zOptional heater and sun shield

zTemperature can be reduced by 5.4℉~9℉(3℃~5℃) with sun shield

zTwo cable entry glands on the bottom of housing

zCompact design and light weight

zEasy to install

1.4 Specifications

Electrical

Input Voltage: 24VAC/220VAC, 50/60Hz

Power Consumption: 25W (w/heater)

Mechanical

Construction: Aluminum, polyester coat

Environmental Standard: IP66

Maximum Size of Camera + Lens:

V1405-7 (L × W × H): 6.85" × 3.54" × 2.85" (174mm × 90mm × 72.5mm)

V1405-10 (L × W × H): 9.84" × 3.54" × 2.85" (250mm × 90mm × 72.5mm)

View Window Thickness: 0.16" (4 mm)

View Window Area (W×H): 2.64" × 2.24" (67mm × 57mm)

Cable Entry: Two PG13.5 compressed cable glands with the maximum

diameter of 0.48" (12mm) available on the bottom

Housing Lid Lock: Stainless steel

Weight

V1405-7: 4.19 lbs. (1.9 kg)

V1405-10: 5.73 lbs. (2.6 kg)

Dimensions

See Figure 1

Note: In (), the unit is mm, others is inch.

Model V1405-7 V1405-10

14.8 (376)

12.75 (324)

5.35 (136)

17.79 (452)

15.75 (400)

8.85 (174)

5.35

(136)

2.64

(67)

2.24

(57)

4.07

(103.5)

1.54

(39)

2.01

(51) 2-M6

Figure 1

Recommended Installation Mounts

Wall mount

V1571-W Wall Mount, H/V adjustable for housing (V1405),

33.07 lbs. (15 kg) load

V1572-W Wall Mount, Non-Adjustable for housing (V1405, V1406, V1407)

and V1614H pan/tilt, 120 lbs. (55 kg) load

V1573 Adapter, Adds H/V adjustability to V1572-W Wall Mount for

housing (V1405, V1406, V1407), 44 lbs. (20 kg) load

V1574A Pole Mount adapter for V1571-W

V1574B Pole Mount adapter for V1572-W

Note: V1572-W should work with V1573.

Specifications and appearance are subject to change without notice.

1.5 Packing

Name Quantity

Manual 1

Camera screw 1

M6×12 screw 2

Outlet 2

Chapter II Installation

The Installation steps are as follows:

1. Open the lid to keep the spring loosens.

2. Remove the housing, and you can mount the camera to either side of the sled.

3. Use the two attaching screws holding the camera. Note that the dimension of housing

when mounting with wide caliber lens.

4. There are two threaded mounting holes on the bottom of the housing and the size of the

holes cannot exceed 0.48"(12mm).

5. Install the sled and camera in the housing:

a. If the camera’s lens is adjustable, extend the lens to its maximum length.

b. Place the sled on the rail over the two attaching screws.

c. Tighten the four screws to secure the camera sled to the rail.

6. Lead the video cable out of camera output.

7. Connect the control cable and power cable of the camera to the connector, as shown in

Figure 2.

8. Connect the power cable of the housing, and lock the cable hole.

9. Adjust the camera focus and close the housing lid.

1. Camera power(+)

2. Camera power(-)

3. Lens com

4. Lens focus

10. Voltage: 24/220VAC5. Lens zoom

6. Lens iris

7. Not used

8. GND

9. Voltage: 24/220VAC

1 2 3 4 5 6 7 8 9 10

Figure 2

This manual suits for next models

Table of contents

Other Infinova Camera Accessories manuals

Infinova

Infinova V1421 Series Installation instructions

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions