Induro 3D-S-01 User manual

3D-SERIES 3-WAY PANHEAD

OPER AtINg INStRuctIONS

Thank you for making Induro your choice for

professional photographic gear. Your Induro gear

is manufactured to provide years of dependable

service. In order to obtain optimum satisfaction

and performance we suggest that you carefully

read these instructions and provide them to

anyone who may also use your Induro gear.

USER NOTICE

Quick Release Plate

Horizontal Tilt Lock

Plate Locking Lever

Pan Lock

Base

Camera Screw

Bubble Level

Front/Rear Tilt Lock

Security Locking Lever

Do not exceed the maximum specied c

load capacity (see Specication chart)

Always ensure that leg and head locks

are tightly engaged before mounting a

camera on the tripod

Do not use the tripod below

temperatures of -4°F or above +158°F

(-20°C / +70°C)

Always clean and dry the tripod after it

has been exposed to wet, dusty, sandy

or salty conditions. Your tripod is not

recommended for use in salt water.

If required clean tripod using a mild

soap solution applied with a soft cloth

and follow by wiping down with fresh

water. Remove any dust, dirt or sand

from all leg locks, leg lock levers,

leg sections and all moving parts.

Do not leave the product in the sun

for prolonged periods and avoid high

temperature exposure

Avoid leaving the tripod unattended in

areas where people could trip over the

tripod and get hurt

Remove camera, lens, and all gear

from the tripod when transporting

the tripod

For your safety, don’t let your Induro

tripod come in contact with any

electrical power source

1 Install by screwing the

head clockwise on to the

3/8 thread mounting thread

of tripod plate. Once it is

hand tight secure by fully

tightening the three head

locking screws from below.

2 A patented dual lock

quick release system

when used properly offers

two levels of security for

your gear. To remove the

quick release plate, squeeze

both levers and pull the

larger plate locking lever

out. The quick release plate

will disengage so it can

be removed.

3 To reconnect the quick

release plate, insert the

angled part of the plate into

the groove on the opposite

side of the locking lever and

press down at. The locking

levers will automatically

engage the locking system

and the locking levers will

return to the safety lock

position. Press the plate

locking lever in rmly

to secure.

4 Horizontal rotation or

panning can be easily

accomplished by rst

loosening the pan lock

and then rotating head on

platform. Once in position

tighten the pan lock securely.

5 Front to rear angle or

tilt adjustments can

be easily accomplished

by rst loosening the tilt

lock (be sure to hold on

rmly to balance weight of

the camera). Position as

required and then tighten

handle securely. You have

the same control and lock

available on the other axis

for horizontal angle or

tilt adjustments.

6 Depending on your

requirements you may

nd it convenient to reorient

the camera or lens 90 degrees

on the quick release and

remount so that the tilt

controls give you different

positioning support.

SPECIFICATIONS

CAT # MODEL # CAMERA MOUNT TILT RANGE PANNING

RANGE

MATCHING

TRIPODS

WEIGHT LOAD

FRONT HORIZONTAL LB KG LB KG

3-Way Panhead 3D-Series

483-001 3D-S-01 QR-3D-01-14S* +65°/-65° +90°/-25° 360° 0 & 1 1.1 0.5 11.0 5.0

483-002 3D-M-23 QR-3D-23-38M** +90°/-30° +90°/-30° 360° 2 & 3 1.8 0.8 17.6 8.0

483-003 3D-L-34 QR-3D-34-38L** +90°/-25° +90°/-35° 360° 3 & 4 2.1 1.0 26.5 12.0

* 1/4-20 Quick Release Plate; * * 1/4-20 & 3/8-16 Quick Release Plates

This manual suits for next models

Table of contents

Other Induro Camera Accessories manuals

Induro

Induro AKB ADVENTURE User manual

Induro

Induro PHQ Series User manual

Induro

Induro QRT Series User manual

Induro

Induro GH Series User manual

Induro

Induro ADVENTURE AKB SERIES User manual

Induro

Induro SA Series User manual

Induro

Induro BHS-Series User manual

Induro

Induro TH-S User manual

Induro

Induro BHD Series User manual

Induro

Induro PHT Series User manual

Induro

Induro DR HI-HAT User manual

Induro

Induro AT-SERIES User manual

Induro

Induro BHL-Series User manual

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions