4
4. Put the shaver sword meshwork clinging to the skin and move
fast. You can carry out circle movement or ruleless movement.
(Fig.-5)
5. Switch the shaving on by sliding the switch upwards.
6. Move the shaving heads quickly over the skin. Make both
straight and circular movements.
7. Stretch the skin with your free hand.
8. Hair on the neck can also be shaved off in this way.
Please bear in mind that your skin may need two to four
weeks to become fully accustomed to the unique shaving
system.
9. Place the protective cap back on the shaver after use. (Fig.-6)
Trimming:
1. Open the back cover and pullout the trimmer. (Fig.-7)
2. Softly touch your skin in the right-angle direction with the
trimmer and trim slowly.
3. After using, push down the switch.
Cleaning and Care:
1. Clean the shaving accessories once a week.
2. Turn off the switch and take off the shelter. Press the outer-cutter
button and take off the outer cutter. Clean the beards on the outer
cutter, the inner cutter and the body (1 time a week). After cleaning,
assemble the outer cutter and the inner cutter on the original
position and cover it with the shelter. (Fig.- 8-11)
Do not change the positions of 1, 2 and 3 and the directions of
net cover so as to avoid the affection to the normal operation
of razor.
Instruction on Environment Protection
• If you want to discard this razor, please open the back cover,
unload the battery and take it to a place designated by the
government for the protection of the environment.
