ILiving ILG8MF30-83 User manual

30” HIGH VELOCITY DRUM FAN

MODEL: ILG8MF30-83

115V 60Hz

Owner’s Manual

PLEASE READ AND

SAVE THESE INSTRUCTIONS

TABLE OF CONTENTS

Important Instructions………………………………………. 3

Specifications ………………………............................... 5-6

Operating Instructions……………………….………....… 6

Maintenance and Cleaning………………………………. 7

Troubleshooting……………………………………………. 8

IMPORTANT INSTRUCTIONS

CAUTION: Please read and save these instructions. Do not use the fan if any part is

damaged or missing. Automatic reset safety device in motor. To reduce risk of injury

disconnect power supply before servicing.

Protect yourself and others by observing all safety information. Failure to comply

with instructions could result in personal injury and/or property damage!

Retain instructions for future reference.

WARNING: To reduce the risk of electric shock, do not expose the fan to water or

rain. To reduce the risk of fire or electric shock, do not use

this fan with any solid state speed control device. This

appliance has a grounded plug. To reduce the risk of fire

or electric shock, this plug is intended to fit in an outlet

only one way. If the plug does not fit into the outlet,

contact a qualified electrician. Do not attempt to bypass

this safety feature.

General Safety Information

1. Ensure that the power source conforms to the electrical requirements of the fan.

2. Where a two-prong wall receptacle is encountered, it must be replaced with a

properly grounded three prong receptacle installed in accordance with the United

States National Electrical Code (NEC) and all applicable local codes and ordinances.

This work must be done by a qualified electrician, using copper wire only.

3. Where possible, avoid the use of extension cords. If they must be used, minimize

the risk of overheating by ensuring that they are UL Listed and of the proper gauge

and length. Never use a single extension cord to operate more than one fan.

4. Do not kink the cord or allow it to contact oil, grease, chemicals, hot surfaces, or

sharp or abrasive objects.

5. This fan is to be operated ONLY with its OSHA compliant guards in place to prevent

persons and/or objects from contacting the revolving propeller. Any other use voids

warranty and may create unsafe conditions.

6. Fan is intended for general air circulation ONLY. It must NOT be used in potentially

dangerous locations such as flammable, explosive, chemical-laden, or wet

atmospheres. Do not use fan in or near a window, since rain may create an electrical

hazard. Do not attach ductwork to the fan.

7. Fan motor is equipped with an automatically resetting control circuit that will

disconnect power if the motor overheats. Always unplug fan before removing guard,

as motor may restart unexpectedly.

8. Do not operate any fan with a damaged cord or plug. Discard fan or return to an

authorized service facility for examination and/or repair.

9. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or

similar coverings. Do not route cord under furniture or appliances. Arrange cord

away from traffic area and where it will not be tripped over.

10. Disconnect the fan when moving it from one location to another.

11. Make sure the fan is on a stable, flat surface while it is in operation.

12. Disconnect the fan when removing the guards for cleaning.

13. This fan is suitable for commercial or industrial use only, not for household or

residential use.

WARNING - Use of a three-prong to two-prong adapter is not

recommended. Improper connection may create the risk of electrocution.

Use of such adapters is prohibited in Canada.

WARNING - Do not depend on any switch as the sole means of

disconnecting power when installing or servicing the fan. Failure to do so

may result in fatal electrical shock.

WARNING - Do not insert fingers or foreign objects into the fan. Do not

block or tamper with the fan in any manner while it is in operation.

WARNING - Do not touch motor. May be hot enough to cause injury.

WARNING - Unplug prior to servicing unit.

WARNING - To reduce the risk of fire or electric shock, do not use this fan

with any speed control device.

SAVE THESE INSTRUCTIONS

SPECIFICATION

Model: ILG8MF30-83

Parts of the fan

Handle (SP-ILG8MF30-83-A)

Rear Guard (SP-ILG8MF30-83-F)

Barrel (SP-ILG8MF30-83-B)

Control Box (SP-ILG8MF30-83-G)

Adjustable Triangle Knob

(SP-ILG8MF30-83-C)

Motor (SP-ILG8MF30-83-H)

Rubber Feet (SP-ILG8MF30-83-D)

Power Cord (SP-ILG8MF30-83-I)

Front Guard (SP-ILG8MF30-83-E)

Wheel (SP-ILG8MF30-83-J)

Product Specifications

Voltage

115V, 60Hz

Current

2.3A

Power

260 Watts

RPM

1100

OPERATION INSTRUCTION

1. Plug the power supply cord into a grounded wall outlet.

(115VAC, 60Hz)

Important: This air circulator comes with a grounded (three prong) plug.

The grounded plug must be used with a grounded outlet.

2. Turn the control knob to LOW, MED or HIGH to set to the desired

speed.

Control Box

Horsepower 1/5 HP

Speeds 3 SPEEDS

CFM 8300 / 6200 / 5550

Noise Level < 70.5 DBA

MAINTENCE AND CLEANING

WARNING:Parts replacement and troubleshooting to be performed only

by qualified personnel.

WARNING:Do not depend on any switch as the sole means of

disconnecting power when installing or servicing the fan. Failure to do so

may result in fatal electrical shock.

WARNING:Unplug the fan from the wall outlet before servicing or

cleaning.

CAUTION: There is no user maintenance part except regular cleaning as

following description. All other servicing or maintenance should be

performed by qualified service personnel.

To clean the fan, use a soft damp cloth. Wipe down with a dry cloth.

Do not use cleaners that are harmful to paints or plastics.

CAUTION: Do not use gasoline, benzene, thinner, harsh cleaners, etc.,

which are dangerous and will damage the air circulator.

The propeller, guard, and motor should be cleaned periodically to

prevent overheating, and/or operating in an imbalanced condition.

CAUTION: If cleaning requires the removal of a guard, remove only the

front guard and re-install when finished in its originally installed position.

Do not repair propeller if it becomes damaged. The propeller is

accurately balanced at the factory and should be replaced if damaged.

Do not bend the propeller. The propeller is accurately balanced at the

factory and should be replaced if damaged.

Do not repair propeller if it becomes damaged.

IMPORTANT: Ensure that propeller is replaced in correct direction as

factory installed.

Motor is permanently lubricated.

TROUBLE SHOOTING

If your fan fails to operate, please follow these Instructions:

1. Make sure the fan is plugged in and the electrical outlet is working

properly.

2. Check for any obstruction. If you find an obstruction, turn the fan

“OFF”. Unplug the fan and carefully remove the obstruction.

Plug the fan in and turn it on again. It should resume normal operation.

NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR FAN, PLEASE DO NOT

ATTEMP TO OPEN OR REPAIR THE FAN YOURSELF. DOING SO COULD

CAUSE DAMAGE TO THE FAN AND/OR PERSONAL INJURY. Always consult

the manufacturer before further use.

Or visit iLivingUSA.com/register-product

Feedback

Love it? Help us make the product more for you.

Let us know with a customer review.

Please visit: https://www.amazon.com/review/review-your-purchases#

At iLiving USA, we are committed to bringing top quality products to our customers.

iLIVING USA

860 Mahler Road,

Burlingame, CA 94010

Tel: 1-800-317-1688

Email: [email protected]

Warranty Information

This product comes with a 1-YEAR LIMITED COMPONENT WARRANTY. If your unit does not appear

to be working properly, please contact our service center by calling 1-800-317-1688. Prior to your call,

we encourage you to visit our service related website www.ilivingusa.com for troubleshooting tips and

service instructions if needed.

Table of contents

Other iLiving Fan manuals

iLiving

iLiving ILG8HVLS72 User manual

iLiving

iLiving ILG8SF7V User manual

iLiving

iLiving ILG937 Instructions for use

iLiving

iLiving ILG8SF10V(APB-10A) User manual

iLiving

iLiving ILG8P30M User manual

iLiving

iLiving ILG8RX12 User manual

iLiving

iLiving ILG8SF10V-ST User manual

iLiving

iLiving ILG8F12 User manual

iLiving

iLiving ILG8M20-50DC User manual

iLiving

iLiving ILG8M24-60DC User manual

iLiving

iLiving ILG8E18-15 User manual

iLiving

iLiving ILG8P31-93 User manual

iLiving

iLiving ILG8CF52B User manual

iLiving

iLiving ILG8G14-12T User manual

iLiving

iLiving ILG8SF16V-ST User manual

iLiving

iLiving ILG-250 User manual

iLiving

iLiving ILG8SF301 Installation instructions manual

iLiving

iLiving ILG8F21 User manual

iLiving

iLiving ILG8F20 User manual

iLiving

iLiving ILG8EF10EX Manual

iLiving

iLiving ILG8P30-72 User manual

iLiving

iLiving ILG8MF72-430 User manual

iLiving

iLiving ILG8SF10V User manual

iLiving

iLiving ILG8SF301 User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual

iLiving ILG8MF30-83 User manual

Popular Fan manuals by other brands