Ikelite 4405 User manual

High Sensitivity Optical Slave Converter

for Remote Triggering of DS Strobes

Item number 4405

Included in the Box

• Optical slave converter

• Fiber optic port (attached)

• Connector protector # 0301.12 (attached)

• Silicone lubricant # 0184.1

Fiber Optic Cord Compatibility

• Ikelite Fiber Optic Cord # 4501

• INON Optical D Cable “Non-wireless type” L-Connector

• SEA&SEA Fiber Optic Cable (L-type) # 50107

• SEA&SEA Fiber Optic Cable II # 50128

• Olympus UW Fiber Optic Cable PTCB-E02

• Nauticam Optical Fiber Cable # 26211 Nauticam to INON

• Nauticam Optical Fiber Cable # 26212 Nauticam to

SEA&SEA

»Consult your housing’s instruction manual for

information on what type of tting is required at the

housing end. Ikelite ber optic ports and plugs are

made to the same standard as SEA&SEA and Olympus

brands.

Installation and Use as a Remote Slave

Attaching the Converter

Remove the connector protector from the plug end of the

converter.

Remove the bulkhead cap from the strobe bulkhead.

Apply a very thin, even layer of lubricant on all threads,

sealing surfaces, and the exposed portion of the plug

o-ring. Do not allow lubricant to get into the pins and

receptacles of the plug or bulkhead.

Align plug and insert into the strobe bulkhead. Each male

pin mates with a female receptacle. Failing to line up the

contacts properly before tightening may result in damage

to the converter and/or strobe.

Hand-tighten the retaining ring.

Setting Your Camera and Strobe

Your camera must be set to a manual, forced ll ash

mode that does not emit a preash. Refer to your

camera’s instruction manual for details on ash settings.

Do not use a red eye reduction ash mode.

Set the strobe to a manual power setting.

Take a test photo.

Positioning the Slave Window

The slave window must be pointed towards your primary

strobe for reliable triggering. For more creative lighting

positioning options, add an optional Extension Cord between

the converter and the strobe.

Use as a Fiber Optic Converter

Adding the ber optic port is necessary when shooting a

DSLR or mirrorless camera with a ber optic converter

attached. This converter supports triggering at high frame

rates (4 fps or faster) as long as the camera is set to a

manual ash mode.

This converter is not usable with cameras emitting a

preash.

Receptacle

Retaining ring

Strobe

bulkhead O-ring

Attaching a Fiber Optic Cord

Attach the ber optic port to the end of the converter to

cover the slave window.

Attach a compatible ber optic cord to the ber optic port.

Attach the other end of the ber optic cord to your

housing.

Maintenance and Storage

Post-Dive

Rinse the strobe with converter attached thoroughly in

fresh water after each use.

Dry the strobe and converter with a clean, lint-free cloth.

Travel and Storage

Remove the converter from the strobe.

Wipe off the threads of the strobe bulkhead and the

converter retaining ring using a clean, lint-free cloth.

Lightly lubricate the o-ring and the threads of the strobe

bulkhead and converter retaining ring.

Attach the connector protector to the converter plug end.

Limited Warranty

This Ikelite product is warranted against any manufacturing

defects for a period of one (1) year from the original date

of purchase. To obtain warranty service, the product must

be returned to Ikelite postage paid. Ikelite will, at its sole

discretion, repair or replace such products, and will return

to customer postage paid. All other claims of any nature are

not covered. Except as mentioned above, no other warranty

expressed or implied applies to this Ikelite product.

Ikelite Underwater Systems

50 W 33rd St

Indianapolis, IN 46208 USA

(317) 923-4523

[email protected]

Other Ikelite Camera Accessories manuals

Ikelite

Ikelite 69540 User manual

Ikelite

Ikelite DL1 DS Link Quick start guide

Ikelite

Ikelite 6871.65 User manual

Ikelite

Ikelite Olympus Mju780 User manual

Ikelite

Ikelite 6801.70 User manual

Ikelite

Ikelite DLM200 User manual

Ikelite

Ikelite 6148.28 for Canon SX280 HS User manual

Ikelite

Ikelite 6282.53 Owner's manual

Ikelite

Ikelite 6043 Owner's manual

Ikelite

Ikelite SD630 User manual

Ikelite

Ikelite SLR-DC Housing User manual

Ikelite

Ikelite ST1K User manual

Ikelite

Ikelite S520 Owner's manual

Ikelite

Ikelite 200DLM/B User manual

Ikelite

Ikelite ULTRAcompact TG-5 User manual

Ikelite

Ikelite W-120 Owner's manual

Ikelite

Ikelite Canon IXUS 950 IS User manual

Ikelite

Ikelite 5610.02 User manual

Ikelite

Ikelite 200DLM/D User manual

Ikelite

Ikelite Olympus SP-350 Operating and maintenance manual

Ikelite

Ikelite D90 User manual

Ikelite

Ikelite Olympus Mju760 User manual

Ikelite

Ikelite ULTRAcompact TG-3 User manual

Ikelite

Ikelite 6243.40 Owner's manual

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions