IFM UIT510 User manual
Operating instructions
Ultrasonic diffuse-reflection sensor
without IO-Link
UIT510
UIT511
UIT513
UIT514
UIT516
UIT517
80278207 / 00 02 / 2019
UK
2
1 Preliminary note
1.1 Symbols used
►Instructions
> Reaction, result
[…] Designation of keys, buttons or indications
→Cross-reference
Important note
Non-compliance may result in malfunction or interference.
Information
Supplementary note.
2 Safety instructions
• Read this document before setting up the product and keep it during the entire
service life.
• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions.
• Only use the product for its intended purpose (→ 3 Functions and features).
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
• Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator.
• Protect units and cables against damage.
3 Functions and features
Ultrasonic sensor for monitoring levels and detecting objects.
3
UK
4 Installation
3
4
1
2
►Secure the unit to a bracket.
1/2: status LEDs 1/2 (yellow),
setting aid and output indication
3: echo LED (green), is on when object or
background is detected
4: teach button
Sound-absorbing surfaces have a negative effect on a reliable function.
►Consider the dead zone (→ Technical data sheet):
No object detection in the dead zone.
For units with metal housing (according to UL 508):
►Observe a minimum distance of 12.7 mm between the sensor and non-
insulated live parts.
For further information please refer to www.ifm.com
→ General information about installation and operation.
5 Electrical connection
►Disconnect power.
► Connect unit (depending on the type selected):
BK: black
BN: brown
BU: blue
WH: white
BN
WH
BK
BU
4
1
3
2OUT2
L+
L
OUT1
• OUT1: switching output
• OUT2: analogue output
colours to DIN EN 60947-5-2
4
6 Settings
The unit and the parameters are set via the teach button (→ 6.1).
6.1 Teach button
6.1.1 Start programming mode
►Press the teach button for 2 s...6 s.
> Yellow status LEDs 1/2 flash (1 Hz), the unit is in the programming mode.
If programming has not been completed successfully, the unit returns to the
previous setting.
6.1.2 Set output response
►Start programming mode (→ 6.1.1).
► Position the object in P1 (Fig. 1 or 2).
►Press the teach button for 1 s.
> Yellow status LEDs 1/2 flash (2.5 Hz), P1 setting is completed.
► Position the object in P2 (Fig. 1 or 2).
►Press the teach button for 1 s.
> Yellow status LEDs 1/2 flash briefly (4 Hz), P2 setting is completed.
6.1.3 Invert output response
►Press the teach button for > 6 s.
> Yellow status LEDs 1/2 flash (> 10 Hz).
> Yellow status LEDs 1/2 flash briefly (> 4 Hz).
> Output function is inverted.
6.1.4 Restore factory setting
►Align the unit so that no echo is received.
> Green echo LED off.
►Start programming mode (→ 6.1.1).
►Press the teach button for 1 s.
> Yellow status LEDs 1/2 flash briefly (4 Hz), factory setting is restored.
5
UK
In case of object recognition, the following output signals are provided:
Fig. 1: Window function P1 > P2 Fig. 2: Hysteresis function P1 = P2
B P2 P1
T
B P1/P2
T
Analogue signal for window function Analogue signal for hysteresis function
10 V/20 mA
10 V/20 mA
0 V/4 mA
0 V/4 mA
1
B P2 P1
3
2
1
B P1/P2
3
2
10 V/20 mA
10 V/20 mA
0 V/4 mA
0 V/4 mA
4
Switching signal for window function Switching signal for hysteresis function
1
1
B P2 P1
1
0
0
2
3
1
1
B P1/P2
1
0
0
2
3
4
1: output response
2: Inverted output signal
3: Distance object
4: Factory setting
B: blind zone
P: taught position
T: teach button
Technical data and further information at www.ifm.com
This manual suits for next models
5
Table of contents
Other IFM Accessories manuals
IFM
IFM PI28 Series User manual
IFM
IFM Efector 200 Series User manual
IFM
IFM LR7009 User manual
IFM
IFM Efector 160 LK8 User manual
IFM
IFM O5D15 Series User manual
IFM
IFM O6E7 Series User manual
IFM
IFM OY4**S Series User manual
IFM
IFM JD Application guide
IFM
IFM JD Series Application guide
IFM
IFM GF854S User manual
IFM
IFM EIO104 User manual
IFM
IFM Efector 200 O7P2 Series User manual
IFM
IFM SB4 Series User manual
IFM
IFM SB1 Series User manual
IFM
IFM PI2798 User manual
IFM
IFM efector200 O6P2 User manual
IFM
IFM OGE User manual
IFM
IFM PI16 Series User manual
IFM
IFM O4E5 Series User manual
IFM
IFM Efector 200 O5PG User manual
