IFM O1D300 User manual

Operating instructions
Optical level sensor
O1D300 UK
80269857 / 00 09 / 2017

2
Contents
1 Preliminary note���������������������������������������������������������������������������������������������������4
1�1 Symbols used ������������������������������������������������������������������������������������������������4
1�2 Warning signs used ���������������������������������������������������������������������������������������4
2 Safety instructions �����������������������������������������������������������������������������������������������4
3 Functions and features ����������������������������������������������������������������������������������������6
3�1 Application areas �������������������������������������������������������������������������������������������6
3�2 Restriction of the application area �����������������������������������������������������������������6
4 Function���������������������������������������������������������������������������������������������������������������6
4�1 Switching function������������������������������������������������������������������������������������������6
4�1�1 Hysteresis function �������������������������������������������������������������������������������6
4�1�2 Window function �����������������������������������������������������������������������������������8
4�2 Analogue function ������������������������������������������������������������������������������������������9
4�2�1 Current output���������������������������������������������������������������������������������������9
4�2�2 Voltage output�������������������������������������������������������������������������������������10
4�3 Switch off the laser �������������������������������������������������������������������������������������10
4�4 IO-Link ���������������������������������������������������������������������������������������������������������10
4�4�1 Operation with IO-Link master������������������������������������������������������������ 11
4�4�2 Extended functions ����������������������������������������������������������������������������� 11
5 Installation����������������������������������������������������������������������������������������������������������12
5�1 Installation conditions ����������������������������������������������������������������������������������12
5�2 Location �������������������������������������������������������������������������������������������������������12
5�3 Mounting accessories����������������������������������������������������������������������������������13
6 Electrical connection������������������������������������������������������������������������������������������14
7 Operating and display elements ������������������������������������������������������������������������15
8 Menu������������������������������������������������������������������������������������������������������������������16
8�1 Menu structure���������������������������������������������������������������������������������������������16
8�2 Explanation of the menu������������������������������������������������������������������������������17
8�2�1 Factory setting ������������������������������������������������������������������������������������17
8�2�2 Main menu������������������������������������������������������������������������������������������17
8�2�3 Extended functions �����������������������������������������������������������������������������19
9 Set-up ����������������������������������������������������������������������������������������������������������������20
10 Parameter setting ��������������������������������������������������������������������������������������������20

3
UK
10�1 General parameter setting�������������������������������������������������������������������������20
10�1�1 Setting of the parameter value ���������������������������������������������������������20
10�1�2 Change from menu level 1 to menu level 2 ��������������������������������������21
10�1�3 Electronic lock ����������������������������������������������������������������������������������22
10�2 Entering the reference level (unit on delivery) �������������������������������������������22
10�2�1 Free choice of the tank height ����������������������������������������������������������22
10�2�2 Carry out the basic teach empty state ����������������������������������������������23
10�2�3 Carry out the adjustment to the reference level��������������������������������24
10�2�4 Unsuccessful adjustment������������������������������������������������������������������25
10�2�5 Successful setting of the reference level ������������������������������������������25
10�3 Configuration of the basic settings ������������������������������������������������������������25
10�3�1 Selection of the display unit��������������������������������������������������������������25
10�3�2 Setting the display ����������������������������������������������������������������������������26
10�3�3 Configure OUT1 �������������������������������������������������������������������������������26
10�3�4 Setting of the switch points for hysteresis function OUT1 ����������������26
10�3�5 Setting of the switch points for window function OUT1 ��������������������26
10�3�6 Configure OUT2 �������������������������������������������������������������������������������27
10�3�7 Setting of the switch points for hysteresis function OUT2 ����������������27
10�3�8 Setting of the switch points for window function OUT2 ��������������������27
10�3�9 Scaling of the measuring range (analogue output)���������������������������27
10�4 Extended functions ������������������������������������������������������������������������������������28
10�4�1 Setting of the delay time for switching outputs ���������������������������������28
10�4�2 Response of the outputs in case of a fault ���������������������������������������28
10�4�3 Setting of the delay time after signal loss �����������������������������������������28
10�4�4 Setting of the sampling rate��������������������������������������������������������������28
10�4�5 Table repeatability and accuracy ������������������������������������������������������29
10�4�6 Setting of the mean filter�������������������������������������������������������������������30
10�4�7 Reset of all parameters to factory setting �����������������������������������������30
11 Operation ���������������������������������������������������������������������������������������������������������31
11�1 Operating modes ���������������������������������������������������������������������������������������31
11�1�1 Run mode �����������������������������������������������������������������������������������������31
11�1�2 Display mode ������������������������������������������������������������������������������������31
11�1�3 Object reflectivity ������������������������������������������������������������������������������31
11�1�4 Programming mode ��������������������������������������������������������������������������31
12 Troubleshooting �����������������������������������������������������������������������������������������������32
13 Maintenance, repair, disposal��������������������������������������������������������������������������34

4
1 Preliminary note
Technical data, approvals, accessories and further information at www�ifm�com�
1.1 Symbols used
►Instruction
> Reaction, result
[…] Designation of pushbuttons, buttons or indications
→Cross-reference
Important note:
Non-compliance can result in malfunctions or interference�
Information
Supplementary note�
1.2 Warning signs used
WARNING
Warning of serious personal injury�
Death or serious irreversible injuries may result�
2 Safety instructions
• Read this document before setting up the product and keep it during the entire
service life�
• The product must be suitable for the corresponding applications and environ-
mental conditions without any restrictions�
• Only use the product for its intended purpose (→ 3 Functions and features)�
• Only use the product for permissible media (→ Technical data).
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur�
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator�
14 Factory setting �������������������������������������������������������������������������������������������������35

5
UK
• Installation, electrical connection, set-up, operation and maintenance of the unit
must be carried out by qualified personnel authorised by the machine operator�
• Protect units and cables against damage�
WARNING
Visible laser light; laser protection class 2�
Use of controls or adjustments other than those specified herein may result in hazardous
radiation exposure� Damage to the retina is possible�
►Do not stare into the laser beam!
►Apply the enclosed labels (laser warning) in the immediate vicinity of the unit�
►Adhere to the caution and warning notes on the product label�
►Use the enclosed label for the power supply cable�
Label for supply cable
D-45128 Essen
Product label
4.0
2007

6
3 Functions and features
The unit continuously detects the level optically and generates output signals
according to the parameter settings�
3.1 Application areas
• The optical level sensor detects media in the measuring range of
20�0���1000�0 cm� They are displayed in relation to a previously defined refer-
ence level�
• It has a background suppression at > 10���100 m�
• Two output signals can be generated, depending on the function mode�
The distance between the sensor and the background must be limited
to max� 100 m by the customer� Otherwise the measured value may be
ambiguous. → 5.1 Installation conditions
3.2 Restriction of the application area
• The unit is suited for granulates, bulk material and cloudy liquids�
• Dust and vapour can impact the quality of the measurements�
• The unit is not suited for oils and clear liquids�
4 Function
4.1 Switching function
4.1.1 Hysteresis function
The outputs change their switching status when the value is above or below the
set switching limits� The hysteresis is the distance between the set and reset
points� The hysteresis keeps the switching status of the output stable if the meas-
ured value varies about the sensing range�
Both outputs (OUT1 and OUT2) can be set as hysteresis function (→ 10.3.3 and
→ 10.3.6)�

7
UK
Example Hno
1� For the output function [Hno] the output switches on when the set point [SPx]
is exceeded in case of a rising level�
2� If the level falls again, the output switches off as soon as the level is below the
reset point [rPx]� The reset point [rPx] is below the set point [SPx]�
1
2
[SPx] =
set point;
[rSPx] = reset point; HY = hysteresis
If the output function [Hnc] has been selected, set and reset point are exchanged�
The output switches off for rising level� If the level falls below [rPx] again, the
output switches on�
Switching status of the outputs
Output function Level (L) Output status
[Hno] L > [SPx] Closed
L < [rPx] Open
[Hnc] L > [SPx] Open
L < [rPx] Closed

8
4.1.2 Window function
The window function enables the monitoring of a defined acceptable range� Both
outputs (OUT1 and OUT2) can be set as window function (→ 10.3.3 and →
10�3�6)�
Switches when the medium is detected
If the measured value is between the lower
limit value [rPx] and the upper limit value
[SPx], the output is closed (if [OUx] = [Fno])�
FE = window; HY = hysteresis*;
[SPx] =
upper limit value
;
[rPx] =
lower limit value
Switches off when the medium is
detected
If the measured value is between the lower
limit value [rPx] and the upper limit value
[SPx], the output is open (if [OUx] = [Fnc])�
FE = window; HY = hysteresis*;
[SPx] = upper limit value;
[rPx] = lower limit value
* A switching hysteresis is set for each window limit value� It cannot be configured but
depends on distance and sampling rate�

9
UK
Switching status of the outputs
Output function Level (L) Output status
[Fno]
L < [SPx] Closed
L > [rPx]
[SPx] < L < [rPx] Open
[Fnc]
L < [SPx] Open
L > [rPx]
[SPx] < L < [rPx] Closed
Both window limit values ([SPx] and [rPx]) work with a switching hysteresis�
→ 4.1.1 Hysteresis function / example for output function [Hno]
4.2 Analogue function
An analogue signal, which is proportional to the distance, can be provided at out-
put 2 (OUT2) → 10.3.9 Scaling of the measuring range (analogue output)�
4.2.1 Current output
Factory setting Measuring range scaled
9795,5 (AEP) 0 MEWASP AEP0 (ASP)
MEW= final value of the measuring range
In the set measuring range the output signal is between 4 and 20 mA�
Faults are also displayed → 12 Troubleshooting�

10
4.2.2 Voltage output
Factory setting Measuring range scaled
9795,5 (AEP) 0 MEWASP AEP0 (ASP)
MEW= final value of the measuring range
In the set measuring range the output signal is between 0 and 10 V�
4.3 Switch off the laser
For safety and maintenance purposes the laser of the unit can be temporarily
switched off via the input on pin 5�
Input signal at pin 5 Laser
Low / not connected On
High Off
4.4 IO-Link
This unit has an IO-Link communication interface which enables direct access
to process and diagnostic data� In addition it is possible to set the parameters of
the unit during operation� Operation of the unit via IO-Link interface requires an
IO-Link master�
With a PC, suitable IO-Link software and an IO-Link adapter cable communication
is possible when the system is not in operation�
The IODDs necessary for the configuration of the unit, detailed information about
process data structure, diagnostic information, parameter addresses and the
necessary information about the required IO-Link hardware and software can be
found at www�ifm�com�
Table of contents
Other IFM Accessories manuals

IFM
IFM LW2120 User manual

IFM
IFM LDL100 User manual

IFM
IFM Efector 500 PY2068 User manual

IFM
IFM SBT633 User manual

IFM
IFM OG Use and care manual

IFM
IFM Efector 500 PM2655 User manual

IFM
IFM Efector 200 OM User manual

IFM
IFM Efector600 TN2531 User manual

IFM
IFM OY Series User manual

IFM
IFM Efector 160 LK8 User manual

IFM
IFM TS502A User manual

IFM
IFM PI17 Series User manual

IFM
IFM efector 200 OGH User manual

IFM
IFM PT24 Series User manual

IFM
IFM O1D111 User manual

IFM
IFM PQ78 Series User manual

IFM
IFM MK59 Series User manual

IFM
IFM Efector 200 O4P5 Series User manual

IFM
IFM O5E5 Series User manual

IFM
IFM MN7 S Series User manual





















