IFM Electronic Efector 200 User manual

Operating instructions

Diffuse reflection sensor with

background suppression

O6H2

O6H200 / 01 01 / 2015

1 Preliminary note

1.1 Symbols used

►Instruction

> Reaction, result

[…] Designation of pushbuttons, buttons or indications

→Cross-reference

Important note

Non-compliance can result in malfunctions or interference.

2 Functions and features

The diffuse reflection sensor detects objects and materials without contact and

indicates their presence by a switching signal.

3 Installation

►Align the diffuse reflection sensor to the object to be detected.

►Secure it to a bracket.

Note:

The objects to be detected are to move transversely to the

lens of the sensor.

►In case of other directions of movement it should be

tested before whether safe switching is guaranteed.

4 Operating and display elements

1: LED yellow - switching output active

2: Setting potentiometer „range“

3: LED green - operation, stability indication

4: Selector „output function“

4.1 Stability indication

The green LED is lit when the supply voltage is applied and the sensor signal is

stable.

stable signal switch point stable signal

Light-on mode

LED green on off off on

LED yellow on on off off

Dark-on mode

LED green on off off on

LED yellow off off on on

5 Electrical connection

The unit must be connected by a qualified electrician.

►The national and international regulations for the installation of electri-

cal equipment must be adhered to.

►Ensure voltage supply to EN 50178.

►Disconnect power.

►Connect the unit as follows:

5.1 PNP

Connector M12 pigtail Cable *





















Connector M8 3-pin Connector M8 4-pin





















* Core colours: BN = brown, BU = blue, BK = black

5.2 NPN

Connector M12 pigtail Cable *

L+

Connector M8 3-pin Connector M8 4-pin

L+

* Core colours: BN = brown, BU = blue, BK = black

6 Settings

6.1 Set the output function

►Setting D: dark-on mode

►Setting L: light-on mode

6.2 Set the range

►Increase range: turn the setting screw

of the potentiometer clockwise.

►Decrease range: turn the setting screw

of the potentiometer anti-clockwise.

Objects that are beyond the set switch point are suppressed.

7 Operation

►Check whether the unit operates correctly.

> The green LED is lit when the supply voltage is applied and the sensor signal

is stable.

> Dark-on mode: the output is switched / the yellow LED is lit when no object is

detected.

> Light-on mode: the output is switched / the yellow LED is lit when an object is

detected.

8 Maintenance, repair, disposal

►Keep the lens of the sensor free from soiling.

►For cleaning do not use any solvents or cleaning agents which could damage

the plastic parts.

►After use dispose of the unit in an environmentally friendly way in accordance

with the applicable national regulations.

Faulty sensors must only be repaired by the manufacturer.

Technical data and further information at unter www.ifm.com

Other manuals for Efector 200

This manual suits for next models

Table of contents

Other IFM Electronic Accessories manuals

IFM Electronic

IFM Electronic efector250 E2M250 User manual

IFM Electronic

IFM Electronic efector 500 PI00 A Series User manual

IFM Electronic

IFM Electronic Efector 300 User manual

IFM Electronic

IFM Electronic LK31xx User manual

IFM Electronic

IFM Electronic efector500 PI20 User manual

IFM Electronic

IFM Electronic efector160 LR7000 User manual

IFM Electronic

IFM Electronic EFECTOR 500 PI26 User manual

IFM Electronic

IFM Electronic efector 200 O5 User manual

IFM Electronic

IFM Electronic O1D106 User manual

IFM Electronic

IFM Electronic Efector 100 User manual

IFM Electronic

IFM Electronic Efector 300 User manual

IFM Electronic

IFM Electronic LR7300 User manual

IFM Electronic

IFM Electronic efector 500 PB5 Series User manual

IFM Electronic

IFM Electronic Ecomat 100 CR2102 Application guide

IFM Electronic

IFM Electronic OPD100 User manual

IFM Electronic

IFM Electronic SA 00 Series User manual

IFM Electronic

IFM Electronic efector100 GG507S User manual

IFM Electronic

IFM Electronic efector 300 SU7000 User manual

IFM Electronic

IFM Electronic Efector 200 O6T3 Series User manual

IFM Electronic

IFM Electronic efector150 User manual

IFM Electronic

IFM Electronic LR2059 User manual

IFM Electronic

IFM Electronic Efector 100 series User manual

IFM Electronic

IFM Electronic TUV NORD Efector 110 GM701S User manual

IFM Electronic

IFM Electronic efector 800 VSE100 User manual

Popular Accessories manuals by other brands

Hillco

Hillco 2810 Operator's manual

Siemens

Siemens QSA2700D Basic documentation

Contours

Contours ZY024 manual

Saivod

Saivod VS621 manual

Virtuox

Virtuox VirtuCLEAN 2.0 user manual

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS user manual

Z-Wave

Z-Wave HSD-200Z user manual

turck

turck FMX-IM-2UPLI63FX quick start guide

Decagon Devices

Decagon Devices 10HS manual

UPPAbaby

UPPAbaby Cup Holder user manual

Elko

Elko SmartSensor Leakage Wireless manual

Grizzly

Grizzly H8371 instructions

Panasonic

Panasonic HG-T Series user manual

DigiDesign

DigiDesign 888/24 I/O installation guide

PROZIS

PROZIS QUAY user manual

patagonia

patagonia PSI Vest user manual

SFC Energy

SFC Energy EFOY GO! manual

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit instruction manual