IEI Technology ROCKY-558EV User manual
ROCKY-558EV
Pentium® ,VGA & 10/100Mbps
Ethernet SBC
@Copyright 1998
All Rights Reserved.
Manual first edition May 20,1998
The information in this document is subject to change without prior notice in
order to improve reliability, design and function and does not represent a
commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use or inability to use
the product or documentation, even if advised of the possibility of such
damages.
This document contains proprietary information protected by copyright. All
rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic, or other means in any form without prior written
permission of the manufacturer.
Trademarks
ROCKY-558EV is registered trademarks of Acquire Inc.,IBM PC is a
registered trademark of International Business Machines Corporation. Intel is
a registered trademark of Intel Corporation. AMI is registered trademarks of
American Megatrends, Inc. Other product names mentioned herein are used
for identification purposes only and may be trademarks and/or registered
trademarks of their respective companies.
1
Contents
1. Introduction ..........................................................3
1.1 Specifications..............................................................................4
1.2 What You Have...........................................................................5
2. Installation............................................................6
2.1 ROCKY-558EV's Layout .............................................................6
2.2 Setting the CPU of ROCKY-58EV............................................... 8
2.3 Watch-Dog Timer......................................................................10
2.4 DiskOnChip™Flash Disk ............................................................11
2.5 BIOS Flash Type Setting............................................................12
3. Connection.........................................................13
3.1 Floppy Disk Drive Connector......................................................13
3.2 PCI E-IDE Disk Drive Connector................................................14
3.3 Parallel Port...............................................................................15
3.4 Serial Ports................................................................................15
3.5 Keyboard/Mouse Connector.......................................................16
3.6 External Switches and Indicators...............................................16
3.7 USB Port Connector ..................................................................17
3.8 IrDA Infrared Interface Port ……….………………………………17
2
3.9 VGA Connector ………………………………………………………….18
3.10 Lan RJ45 Connector …………………………………….18
3.11 CPU Fan Connector …………………………………….19
3.12 External Battery Connector ……………………………….19
4. AMI BIOS Setup.................................................20
4.1 Getting Start..............................................................................20
4.2 Standard CMOS Setup ..............................................................21
4.3 Advanced CMOS Setup.............................................................22
4.4 Advanced Chipset Setup............................................................23
4.5 Peripheral Setup .......................................................................24
4.6 Power Management Setup.........................................................25
4.7 PCI / Plug and Play Setup..........................................................26
5. E2Key Function..................................................27
Appendix A. Watch-Dog Timer..............................29
3
1
Introduction
Welcome to the ROCKY-558EV Pentium® w/ VGA &
10/100MBps Ethernet Single Board Computer. The ROCKY-
558EV board is an PICMG bus form factor board, which
equipped with high performance Pentium® CPU and advanced
high performance VGA and Ethernet, designed for the system
manufacturers, integrators, or VARs that want to provide all the
performance, reliability, and quality at a reasonable price.
This board built-in DiskOnChip™(DOC) Flash Disk for embedded
application. The DOC Flash Disk is 100% compatible to hard
disk. User can use any DOS command without any extra
software utility. The DOC currently is available from 2MB to
72MB.
An advanced high performance VGA chip –Winbond W9970CF
is used in the ROCKY-558EV board. The W9970CF integrated
Video Graphics Accelerator in a single chip.
In addition, the ROCKY-558EV provides two 168-pin DIMM
sockets for its on-board DRAM. DIMM module is 3.3V
SDRAM.and max. 128MB for one module.
The board’s RTL8139 network chipset provides 10MBps or
100MBps Ethernet with auto-sensing function.
ROCKY-558EV uses the advanced ALI Chipset Aladdin 4+
which is 100% ISA/PCI compatible chipset with PCI 2.1 standard.
1.1 Specifications :
4
The ROCKY-558EV Pentium® w/ VGA & 10/100MBps Ethernet
Single Board Computer provides the following specification:
•CPU : Pentium® MMX up to 233Mhz, AMD K6 up to 300MHz
processor,Cyrix 6x86MX,IDT C6 processor
•Bus : PICMG bus, meet PCI 2.1 standard
•DMA channels : 7
•Interrupt levels : 15
•Chipset : ALI Aladdin 4+
•VGA : Winbond W9970CF
Resolution : 1024x768,256 color
More information : www.winbond.com.tw
•Ethernet : Built-in the RTL8139 Chipset
IEEE 802.3u 100BASE-TX standard
Auto-sensing interface to 10MBps or 100MBps networks
Full duplex capability
More information : www.realtek.com.tw
•Real-time clock / calendar : backup by industrial Li Battery. .
•RAM memory : up to 256MB SDRAM
•Second Cache memory : 512KB Pipelined Burst SRAM on board
•Ultra DMA/33 IDE Interface : up to two PCI Enhance IDE hard
drives. The Ultra DMA/33 IDE can handle data transfer up to
33MB/s. The best of all is that is new technology is compatible with
existing ATA-2 IDE specifications. So there is no need to do any
change for customer’s current accessory.
•Floppy disk drive interface : two 2.88 MB, 1.44MB, 1.2MB, 720KB,
or 360KB floppy disk drives.
•Two high speed Series ports : NS16C550 compatible UARTs
•
Standard/EPP/ECP Parallel Port
5
•IrDA port : Support Serial Infrared(SIR) and Amplitude Shift
Keyed IR(ASKIR) interface.
•USB port : Support USB port for future expansion.
•Watch-dog timer : can be set by 1,2,10,20,110 or 220 seconds
period. Reset or NMI was generated when CPU did not periodically
trigger the timer.
•Flash Disk - DiskOnChip™: The Flash Disk provides 100%
compatible with hard disk.
•Keyboard connector
•Mouse : PS/2 Mouse Port on-board.
•Power Consumption : +5V @ 5.5A
( Pentium® MMX-200,32MB SDRAM)
+12V @ 160mA , -12V@60mA
•Operating Temperature : 0°~ 55°C ( CPU needs Cooler)
1.2 What You Have
In addition to this User's Manual, the ROCKY-558EV package
includes the following items:
•ROCKY-558EV Pentium® w/ VGA &10/100MBps Ethernet
SBC
•RS-232/Printer Cable
•FDD/HDD Cable
•6-pin Mini-Din to Keyboard and Mouse Adapter Cable
If any of these items is missing or damaged, contact the dealer
from whom you purchased the product. Save the shipping
materials and carton in case you want to ship or store the
product in the future.
6
2
Installation
This chapter describes how to install the ROCKY-558EV. At first,
the layout of ROCKY-558EV is shown, and the unpacking
information that you should be careful is described. The
jumpers and switches setting for the ROCKY-558EV's
configuration, such as CPU type selection, system clock setting,
and watch dog timer, are also included.
2.1 ROCKY-558EV's Layout
< reference next page >
7
8
2.2 Setting the CPU of ROCKY-558EV
•CPU Clock Setting :
CPU Speed/Clock JP3
7-8 JP3
9-10 JP3
11-12
55MHz CLOSE CLOSE OPEN
60MHz CLOSE OPEN OPEN
66MHz OPEN OPEN OPEN
75MHz OPEN CLOSE CLOSE
83MHz CLOSE OPEN CLOSE
•CPU to Bus Multiple :
Multiplier JP3
1-2 JP3
3-4 JP3
5-6
1.5 x OPEN OPEN OPEN
2 x CLOSE OPEN OPEN
2.5 x CLOSE CLOSE OPEN
3 x OPEN CLOSE OPEN
3.5 x OPEN OPEN OPEN
4 x CLOSE OPEN CLOSE
4.5 x CLOSE CLOSE CLOSE
CPU Frequency = CPU Clock x Multiplier for example
Pentium® 200MHz = 66MHz CPU Clock x 3
•CPU Core Voltage Selection :
Please check the CPU Core Voltage before you install the
CPU. Right now new Intel MMX CPU is dual voltages for
core and I/O,the I/O is 3.3V but the core is 2.8V. This kind
of CPU design will enhance the low power consumption
capability. As for the general Pentium® CPU is one voltage for
I/O and Core - 3.3V,3.4V,or 3.5V
•JP4 CPU Core Voltage Setting :
Table of contents
Other IEI Technology Single Board Computer manuals
IEI Technology
IEI Technology PICOe-945GSE User manual
IEI Technology
IEI Technology PM-BT series User manual
IEI Technology
IEI Technology KINO-DQM871-i1 User manual
IEI Technology
IEI Technology PCIE-9450 User manual
IEI Technology
IEI Technology KINO-PV-D5253-D4253 User manual
IEI Technology
IEI Technology PCISA-6770 Series User manual
IEI Technology
IEI Technology KINO-TGL-U User manual
IEI Technology
IEI Technology ICE-BDE-T7 User manual
IEI Technology
IEI Technology KINO-QM770 User manual
IEI Technology
IEI Technology WAFER-ULT5 User manual
IEI Technology
IEI Technology NANO-QM770-R10 User manual
IEI Technology
IEI Technology KINO-EHL-J6412 User manual
IEI Technology
IEI Technology WAFER-CV-D25501 User manual
IEI Technology
IEI Technology IMBA-Q470 User manual
IEI Technology
IEI Technology KINO-DBT Series User manual
IEI Technology
IEI Technology SPCIE-C236 User manual
IEI Technology
IEI Technology HPCIE-Q470 User manual
IEI Technology
IEI Technology WAFER-945GSE3 User manual
IEI Technology
IEI Technology PSB-810EAV User manual
IEI Technology
IEI Technology WAFER-PV-D4252 User manual
