IDEC SmartRelay FL1A-H12RCE User manual
IDEC SmartRelay
Manual
March 2001
www.idec.com
Copyright © 2001 IDEC IZUMI CORPORATION All rights reserved
The reproduction, transmission or use of this document or its contents is not permitted
without express written authority. Offenders will be liable for damages. All rights
reserved, in particular in the event of a patent being granted or the registration of a
utility model or design.
Disclaimer of Liability
We have checked the contents of this manual for compliance with the hardware and
software described. Nevertheless, discrepancies may exist. However, the data in this
manual is reviewed regularly and any necessary corrections will be included in
subsequent editions. Suggestions for improvement are welcomed.
iii
IDEC SmartRelay User’s Manual
Contents
1 Getting to Know IDEC SmartRelay 1-1
2 Installing and Wiring IDEC SmartRelay 2-1
2.1 Installing/Removing IDEC SmartRelay 2-2
2.2 Wiring IDEC SmartRelay 2-4
2.2.1 Connecting the power supply 2-4
2.2.2 Connecting IDEC SmartRelay’s inputs 2-6
2.2.3 Connecting outputs 2-10
2.3 Switching IDEC SmartRelay On/Resumption
of Power Supply 2-12
3Programming IDEC SmartRelay 3-1
3.1 Connectors 3-2
3.2 Blocks and Block Numbers 3-4
3.3 From the Circuit Diagram to
IDEC SmartRelay 3-7
3.4 The 4 Golden Rules for Working with IDEC
SmartRelay 3-10
3.5 Overview of IDEC SmartRelay’s Menus 3-12
3.6 Entering and Starting a Program 3-13
3.6.1 Switching to memory cartridge 3-13
3.6.2 First program 3-14
3.6.3 Entering a program 3-16
3.6.4 Second program 3-23
Contents
iv IDEC SmartRelay User’s Manual
3.6.5 Deleting a block 3-30
3.6.6 Deleting a number of interconnected blocks 3-31
3.6.7 Correcting typing errors 3-32
3.6.8 “?“on the display 3-32
3.6.9 Deleting a program 3-33
3.7 Storage Space and Size of a Circuit 3-34
4 IDEC SmartRelay Functions 4-1
4.1 Constants and Connectors –Co 4-2
4.2 List of General Functions –GF 4-4
4.2.1 AND 4-6
4.2.2 AND with RLO edge detection 4-6
4.2.3 NAND (AND Not) 4-7
4.2.4 NAND with RLO edge detection 4-8
4.2.5 OR 4-8
4.2.6 NOR (OR Not) 4-9
4.2.7 XOR (exclusive OR) 4-10
4.2.8 NOT (negation, inverter) 4-10
4.3 Fundamentals of Special Functions 4-11
4.3.1 Description of the inputs 4-11
4.3.2 Time response 4-12
4.3.3 Clock buffering 4-13
4.3.4 Retentivity 4-13
4.3.5 Degree of protection 4-14
4.3.6 Gain and offset calculation for analog values 4-14
Contents
v
IDEC SmartRelay User’s Manual
4.4 List of Special Functions –SF 4-15
4.4.1 On delay 4-18
4.4.2 Off delay 4-20
4.4.3 On/Off delay 4-22
4.4.4 Retentive on delay 4-24
4.4.5 Latching relay 4-26
4.4.6 Current impulse relay 4-28
4.4.7 Interval time-delay relay –pulse output 4-29
4.4.8 Edge-triggered interval time-delay relay 4-30
4.4.9 Seven-day time switch 4-31
4.4.10 Twelve-month time switch 4-36
4.4.11 Up/Down counter 4-38
4.4.12 Operating hours counter 4-41
4.4.13 Symmetrical clock pulse generator 4-44
4.4.14 Asynchronous pulse generator 4-45
4.4.15 Random generator 4-46
4.4.16 Frequency trigger 4-48
4.4.17 Analog trigger 4-50
4.4.18 Analog comparator 4-53
4.4.19 Stairwell light switch 4-57
4.4.20 Dual-function switch 4-59
4.4.21 Message texts 4-61
5 Parameterizing IDEC SmartRelay 5-1
5.1 Switching to Parameterization Mode 5-2
5.1.1 Parameters 5-2
Contents
vi IDEC SmartRelay User’s Manual
5.1.2 Selecting a parameter 5-3
5.1.3 Changing a parameter 5-4
5.2 Setting the Time (FL1A-…C…) 5-7
6 IDEC SmartRelay Memory Cartridge 6-1
6.1 Overview of the Memory Cartridge 6-2
6.2 Removing and Inserting Memory
Cartridge 6-2
6.3 Copying a Program from IDEC SmartRelay to
the Memory Cartridge 6-5
6.4 Copying from the Memory Cartridge to
IDEC SmartRelay 6-6
7 IDEC SmartRelay Software 7-1
7.1 Possible Applications for IDEC SmartRelay
Software 7-2
7.2 Connecting IDEC SmartRelay to PC 7-3
7.3 Transfer Settings 7-4
8 Applications 8-1
8.1 Stairwell or Hall Lighting 8-2
8.1.1 Demands on stairwell lighting 8-2
8.1.2 Previous solution 8-2
8.1.3 Lighting system with IDEC SmartRelay 8-3
Contents
vii
IDEC SmartRelay User’s Manual
8.1.4 Special features and enhancement options 8-6
8.2 Automatic Door 8-7
8.2.1 Demands on an automatic door 8-7
8.2.2 Previous solution 8-8
8.2.3 Door control system with IDEC SmartRelay 8-8
8.2.4 Special features and enhancement options 8-11
8.2.5 Enhanced FL1A-H10RCB solution 8-11
8.3 Ventilation System 8-14
8.3.1 Demands on a ventilation system 8-14
8.3.2 Advantages of using IDEC SmartRelay 8-16
8.4 Industrial Gate 8-18
8.4.1 Demands on the gate control system 8-18
8.4.2 Previous solution 8-19
8.4.3 Enhanced IDEC SmartRelay solution 8-21
8.5 Fluorescent Lights 8-22
8.5.1 Demands on the lighting system 8-22
8.5.2 Previous solution 8-23
8.5.3. Fluorescent light control with FL1A-H10RCB 8-24
8.6 Water Pump 8-26
8.6.1 Demands on the control system of a rainwater
Pump 8-27
8.6.2 Previous solution 8-27
8.6.3 Rainwater pump with FL1A-H10RCB 8-28
8.6.4 Special features and enhancement options 8-29
8.7 Further Potential Applications 8-30
Contents
viii IDEC SmartRelay User’s Manual
A Technical Specifications A-1
A.1 General Technical Specifications A-1
A.2 Technical Specifications: A-3
FL1A-H10RCB, FL1A-B10RCB
A.3 Technical Specifications: A-6
FL1A-H12RCE, FL1A-H10RCA,
FL1A- B10RCA
A.4 Technical Specifications: A-9
FL1A-H12RCE, FL1A-B12RCE
B Determining Memory Requirements B-1
C Determining the Cycle Time C-1
D IDEC SmartRelay Without a Display D-1
E IDEC SmartRelay Menu Structure E-1
F Order Numbers F-1
G Abbreviation G-1
i
IDEC SmartRelay User’s Manual
Welcome to IDEC SmartRelay
Dear customers,
Thank you for purchasing IDEC SmartRelay, and congratulations
on your decision. In IDEC SmartRelay you have acquired a logic
module that meets the stringent quality requirements of ISO9001.
IDEC SmartRelay is universal in application. Its comprehensive
functionality and great ease of use make it a highly cost-efficient
solution for virtually any application.
IDEC SmartRelay documentation
This IDEC SmartRelay manual tells you how to install, program
and use IDEC SmartRelay.
You can find information on wiring in the IDEC SmartRelay
manual as well as in the IDEC SmartRelay product information
that is supplied with each device. You can get further information
on programming IDEC SmartRelay via the PC in the WindLGC
online help system. WindLGC is the IDEC SmartRelay
programming software for PCs. It runs under WINDOWS and will
help you get to know IDEC SmartRelay and to write, test, print out
and archive programs independently of IDEC SmartRelay.
Guide to the manual
We have subdivided this manual into 9 chapters:
•Getting to Know IDEC SmartRelay
•Installing and Wiring IDEC SmartRelay
•Programming IDEC SmartRelay
•IDEC SmartRelay Functions
•Parameterizing IDEC SmartRelay
•IDEC SmartRelay’s Memory Cartridge
•IDEC SmartRelay Software
•Applications
•Appendices
Welcome to IDEC SmartRelay
ii IDEC SmartRelay User’s Manual
Safety guidelines
This manual contains notices which you should observe to ensure
your own personal safety, as well as to protect the product and
connected equipment. These notices are highlighted in the
manual by a warning triangle and are marked as follows
according to the level of danger:
!Danger Indicates that death, severe personal injury or substantial damage to
property will result if proper precautions are not taken.
!Warning Indicates that death, severe personal injury or substantial damage to
property can result if proper precautions are not taken.
!Caution Indicates that personal injury or damage to property can result if
proper precautions are not taken.
Note Draws your intention to particularly important information on the
product, handling the product, or to a particular part of the
documentation.
!Warning Only qualified personnel should be allowed to install and work on
this equipment. Qualified personnel are defined as persons who are
authorized to commission, to ground and to tag circuits, equipment
and systems in accordance with established safety practices and
standards.
!Warning This device may only be used for the applications described in the
catalog and the technical description, and only with non-IDEC
devices or components if they have been approved or
recommended by IDEC.
This product can only function correctly and safely if it is transported,
stored, set up, and installed correctly, and operated and maintained
as recommended.
This manual suits for next models
6
Table of contents
Other IDEC Relay manuals
IDEC
IDEC HR1S-DMB Series User manual
IDEC
IDEC HR6S Series User manual
IDEC
IDEC SmartAXIS FT9Z-1A01 User manual
IDEC
IDEC HR1S-ATE User manual
IDEC
IDEC HR1S-AF 5130B/PB User manual
IDEC
IDEC HR1S-ATE User manual
IDEC
IDEC HR1S-AK User manual
IDEC
IDEC LD6A Series User manual
IDEC
IDEC EB3N User manual
IDEC
IDEC EB3N User manual
