Warning
• Only hang up or take down bike with hook facing left.
(However, it can be stored on left or right side.)
• If bike is properly hung, pedal should not touch wall,
but if bike is swung too far or bumped, pedal might
make contact with wall. To avoid wall damage,
consider installing protection on the wall.
• After hanger is installed, it may not be compatible with
other bikes.
Ibera Co. Ltd.
Specifications subject to change without notice. Ibera is a trademark
of Ibera Co. Ltd. All other trademarks are property of their respective
owners. Copyright Ibera Co. Ltd. Made in Taiwan. IB-ST17
See other Ibera products at www.ibera.info
Artwork: 04/20
Only hang up or take down bike with hook facing left. (However, it can be stored on
left or right side.) With wheel holder locked in place on left side, lift bike, carefully
placing front wheel rim behind hook, and tyre on recess, centred on rim pad (fig. 6, 7).
Mount Rear Wheel Rest
With hanger installed securely, press release lever, and swing wheel holder left, locking in place. Lift bike, carefully placing front
wheel rim behind hook, and tyre on recess, centred on rim pad. Mark a cross on the wall at the intersection between the rear wheel
hub and the vertical centreline of front wheel bracket. Position the centre of rear wheel rest at the centre of your marked cross.
Mark 2 drill holes: For Drywall, use inner holes (fig. 5a). For Masonry or Concrete Walls, use outer slots (fig. 5b). Drill holes and
fix screws in place.
Left Side
To store bike on left side, ensure left side
crank/pedal is parallel with seat tube, facing bike saddle.
Seat rear wheel on left side of wheel rest (fig. 8).
Right Side
To store bike on right side, ensure right side
crank/pedal is parallel with seat tube, facing bike saddle.
Press release lever, and swing gently to the right until it locks
in place. Move rear wheel to right side of wheel rest (fig. 8).
Storing BikeStoring Bike
Hanging Up Bike
Hanging Up Bike
Ibera warrants this product for normal usage against workmanship, and material
defects to the original purchaser for two year from purchase date. Products
purchased online are not covered by this warranty unless purchased from an
authorised Ibera online store. 1. User assumes all risk of personal injury,
damage to or failure of the product when it is used in jumping, acrobatics or
similar activities. 2. Warranty does not cover any incidental or consequential
damages, such as personal injury or other losses due to accident, neglect,
misuse, abuse, modification, normal wear and tear, improper care and cleaning,
or failure to follow included instructions.
Limited Warranty
www.ibera.info
USER MANUAL
Side Swing Bicycle HangerSide Swing Bicycle Hanger
For mounting a bike vertically on wall.
fig. 6
Left Right
Wall
Hang left side only
fig. 7
Side-swing design
Wall
fig. 8
Left side Right side
For Mounting on Drywall (plasterboard), or
Wooden Panel Walls 石膏板或木板的支撐柱
For Mounting on Masonry or
Concrete Walls 磚塊或水泥墻
fig. 5a fig. 5b
Drill holes
Drill holes
(6.5 mm diameter)
Correct crank/pedal
position
Correct crank/pedal
position
