Hytera PD71XIS User manual

Preface

may represent 2, 5, 6 or 8)

Thanks for your favor in our product. This manual is helpful for you to quickly know how to use the

product. For detailed features and operations, please refer to the Feature Description and Operation

Manual along with the product.

To avoid body injury or property loss caused by misoperation, please read the Safety Information

Booklet carefully before use.

This manual is applicable to the following product:

PD71XIS Digital Portable Radio (X

Date:2015.9.21

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct.

The interference by one or more of the following measures:

 Reorient or relocate the receiving antenna. Increase the separation between the

equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

Icon Conventions

z: Indicates functions that are available on digital channel only.

z: Indicates functions that are available on analog channel only.

Functions marked with no icon are available on both analog and digital channels.

Disclaimer

Hytera Communications Corporation Limited (the Company) endeavors to achieve the accuracy and

completeness of this manual, but no warranty of accuracy or reliability is given. All the specifications and

designs are subject to change without notice due to continuous technology development. No part of this

manual may be copied, modified, translated, or distributed in any manner without the express written

permission of us.

We do not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy or

completeness of the Third Party products and contents involved in this manual.

If you have any suggestions or would like to learn more details, please visit our website at:

http://www.hytera.com.

 Consult the dealer or an experienced radio/TV technician for help.

Operation is subject to the following two conditions: 1. This device may not cause harmful interference,

and 2. This device must accept any interference received, including interference that may cause

undesired operation.

Note: Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Compliance with RF Exposure Standards

Hytera's portable radio complies with the following RF energy exposure standards and guidelines:

 United States Federal Communications Commission, Code of Federal Regulations; 47 CFR

§ 1.1307, 1.1310 and 2.1093

 American National Standards Institute (ANSI) / Institute of Electrical and Electronic

Engineers (IEEE) C95. 1:2005; Canada RSS102 Issue 5 March 2015.

 Institute of Electrical and Electronic Engineers (IEEE) C95.1:2005 Edition

RF Exposure Compliance and Control Guidelines and

Operating Instructions

To control your exposure and ensure compliance with the occupational/controlled environment

exposure limits always adhere to the following procedures.

Guidelines:

 Do not remove the RF Exposure Label from the device.

 User awareness instructions should accompany device when transferred to other users.

 Do not use this device if the operational requirements described herein are not met.

Operating Instructions:

 Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the

Push-To-Talk (PTT) button. To receive calls, release the PTT button. Transmitting 50% of

the time, or less, is important because this radio generates measurable RF energy

exposure only when transmitting (in terms of measuring for standards compliance).

 Hold the radio in a vertical position in front of face with the microphone (and the other parts

of the radio, including the antenna) at least one inch (2.5 cm) away from the nose. Keeping

the radio at the proper distance is important because RF exposures decrease with distance

from the antenna. Antenna should be kept away from eyes.

 When worn on the body, always place the radio in a Hytera's approved clip, holder, holster,

case, or body harness for this product. Using approved body-worn accessories is important

because the use of Hytera's or other manufacturer's non-approved accessories may result

in exposure levels, which exceed the FCC's occupational/controlled environment RF

exposure limits.

 If you are not using a body-worn accessory and are not using the radio in the intended use

position in front of the face, then ensure the antenna and the radio are kept at least 2.5 cm

(one inch) from the body when transmitting. Keeping the radio at the proper distance is

important because RF exposures decrease with increasing distance from the antenna.

 Use only manufacturer's name approved supplied or replacement antennas, batteries, and

accessories. Use of non-manufacturer-name approved antennas, batteries, and

accessories may exceed the FCC RF exposure guidelines.

 Contact your local dealer for the optional accessories of the product.

The device has been tested and compliance with SAR limits, users can obtain Canadian information on

RF exposure and compliance

Après examen de ce matériel aux conformité aux limites DAS et/ou aux limites d’intensité de champ RF,

les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance d’acquérir

les informations correspondantes

EU Regulatory Conformance

As certified by the qualified laboratory, the product is in compliance with the essential requirements and

other relevant provisions of the following directives:

 1999/5/EC or 2014/53/EU

 2006/66/EC

 2011/65/EU

 2012/19/EU

ISEDC Statement

Opera

RSSith

This device complies w

tion is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Innovation, Science and Economic Development Canada standar (

CNR d'ISEDC applicables aux

Le présent appareil est conforme aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire

ouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compromettre le fonctionnement

Please note that the above information is applicable to EU countries only.

1. Intrinsically Safe Radio Information

Caution

¾Observe the following safety instructions when using the product, so as to ensure safe and

reliable operations. Failure to observe the instructions may result in danger or violation of

applicable regulations.

¾To avoid possible interference with blasting operations, always turn off the product when you are

near electrical blasting caps, in a blasting area, or in areas posted "Turn off two-way radios". Obey

all signs and instructions.

1.1 Product Marking

The intrinsically safety information of the product is as follows:

Certificate Number Marking

IECEx FMG 13.0010X

Ex ia IIC T3 Ga

Ex ia I T3 Ma

Ex ia IIIC T160°C Da

FM13ATEX0023X

II 1 G Ex ia IIC T3 –20°C ≤Ta ≤+55°C

I M1 Ex ia I –20°C ≤Ta ≤+50°C, IP5X

II 1 G Ex ia IIC T3 –20°C ≤Ta ≤+50°C, IP5X

II 1 D Ex ia IIIC T160°C –20°C ≤Ta ≤+50°C, IP5X

FM16US0013X

Class I Division 1, Groups A,B,C,D T3B –20°C ≤Ta ≤+55°C

Class I,II,III, Division 1, Groups A,B,C,D,E,F,G T3C –20°C ≤Ta ≤+50°C,

IP5X

Class I, Zone 0, AEx ia IIC T3B –20°C ≤Ta ≤+55°C

Class I, Zone 0, AEx ia IIC T3C –20°C ≤Ta ≤+50°C, IP5X

Zone 20, AEx ia IIIC T160°C –20°C ≤Ta ≤+50°C, IP5X

FM16CA0013X

Class I Division 1, Groups A,B,C,D T3B –20°C ≤Ta ≤+55°C

Class I,II,III Division 1, Groups A,B,C,D,E,F,G T3C –20°C ≤Ta ≤+50°C,

IP5X

Zone 0, Ex ia IIC T3B Ga –20°C ≤Ta ≤+55°C

Class I, Zone 0, Ex ia IIC T3C Ga –20°C ≤Ta ≤+50°C, IP5X

Certificate Number Marking

Zone 20, Ex ia IIIC T160°C Da –20°C ≤Ta ≤+50°C, IP5X

The following describes the meaning of each part in the marking:

zEx: specific marking for explosion protection.

zia/ib: type of protection. It indicates that the product adopts intrinsic safety ia/ib suitable for use in

zones 0, 1, and 2 (gases) and zones 20, 21, and 22 (dusts). For details about the zones, see 　

Hazardous Area Classification.

zI/II/III: equipment group. Group I indicates that the product is intended for use in mines susceptible to

firedamp. Group II indicates that the product is intended for use in places with an explosive gas

atmosphere other than mines susceptible to firedamp. Group III indicates that the product is intended

for use in places with an explosive dust atmosphere.

zA/B/C/D/E/F/G: gas group. It defines the type of hazardous material in the surrounding atmosphere.

Groups A, B, C, and D are for gases, while groups E, F, and G are for dusts and flyings.

zT3/T4: temperature class. T3 indicates that the maximum surface temperature during product use is

200°C. T4 indicates that the maximum surface temperature during product use is 135°C.

zT120°C/T160°C: It indicates that the maximum surface temperature during product use is 120°C or

160°C.

Ga/Ma/Da/Db: equipment protection level. It is the level of protection that is given to equipment based on

the likelihood of its becoming a source of ignition and distinguishing the difference between explosive

gas atmospheres, explosive dust atmospheres, and the explosive atmospheres in mines susceptible to

firedamp.

zIP5X: ingress protection code. It indicates the degree of protection against solids and liquids.

1.2 Explosives Classification

zI: firedamp

zII: explosive mixture (vapors and mists)

zIII: explosive dusts (fibers or flyings)

1.3 Hazardous Area Classification

Hazardous area is a potentially flammable or explosive area with flammable or explosive gases, vapors,

or liquids or flammable dusts or fibers. Hazardous areas are classified into the following types:

Hazardous

Substance

Present for Long

Periods (1000 hours

above per year)

Present in Normal

Operation (10–1000 hours

per year)

Present in Abnormal

Operation (10 hours below

per year)

Hazardous

Substance

Present for Long

Periods (1000 hours

above per year)

Present in Normal

Operation (10–1000 hours

per year)

Present in Abnormal

Operation (10 hours below

per year)

Gases Zone 0 Zone 1 Zone 2

Dusts Zone 20 Zone 21 Zone 22

zZone 0: a place in which an explosive atmosphere consisting of a mixture with air of dangerous

substances in the form of gas, vapor or mist is present continuously or for long periods or frequently.

zZone 1: a place in which an explosive atmosphere consisting of a mixture with air of dangerous

substances in the form of gas, vapor or mist is likely to occur in normal operation occasionally.

zZone 2: a place in which an explosive atmosphere consisting of a mixture with air of dangerous

substances in the form of gas, vapor or mist is not likely to occur in normal operation but, if it does

occur, will persist for a short period only.

zZone 20: a place in which an explosive atmosphere in the form of a cloud of combustible dust in air is

present continuously or for long periods or frequently.

zZone 21: a place in which an explosive atmosphere in the form of a cloud of combustible dust in air is

likely to occur in normal operation occasionally.

zZone 22: a place in which an explosive atmosphere in the form of a cloud of combustible dust in air is

not likely to occur in normal operation but, if it does occur, will persist for a short period only.

1.4 No Misoperations

Stop operating the product and leave the blasting area immediately when the intrinsic safety or integrity

of the product is endangered, and deliver it to your local dealer for examination.

The safety or reliability of the product may be endangered when:

zThe product is stored improperly.

zThe product is faulty.

zThe product works with overload.

zThe product operates beyond the tolerance or threshold.

zThe product is damaged during transportation.

zThe product's housing is obviously damaged or cracked.

zThe logo or characters on the product are hard to be recognized.

1.5 Safety Instructions

zBefore using the product in a hazardous atmosphere, ensure that the two screws fixing the battery

are correctly tightened.

zEnsure that the product is used only with the BL1813-Ex battery.

zEnsure that the product is used only with Hytera-specified accessories.

zDo not replace the battery or accessories in a hazardous atmosphere.

zCharge the battery using the designated charger in a non-hazardous atmosphere with a maximum

ambient temperature of 40ºC.

zDo not carry any standalone battery in a hazardous atmosphere.

zDo not use the product if its housing is damaged or cracked.

zDo not block or open the pressure adjustment hole on the product.

zDo not use a damaged antenna. A minor burn may be caused when you touch a damaged antenna.

zDo not expose the product to direct sunlight for a long time, nor place it close to a heating source.

zDo not dissemble or modify the product. Unauthorized modification may negate the approval rating of the

product.

zDo not attempt to disassemble, destroy, or short-circuit the battery. Never dispose of it in fire.

zHold the product upright and keep its microphone 2.5 to 5 centimeters away from your mouth during use.

zIf you wear the product, ensure that its antenna is at least 2.5 centimeters away from your body during

transmission.

1.6 Compliance Standards

Standard Issue Date

IECEx

IEC-60079-0 (Ed. 6.0) 2011

IEC-60079-11 (Ed. 6.0) 2011

CAN/CAS-C22.2 NO.60529(Ed. 5.0) 2005

CAN/CAS-C22.2 NO.0-M91 2006

CAN/CAS-C22.2 NO.61010-1(Ed. 3.0) 2012

CAN/CAS-C22.2 NO.213-M1987 2013

Standard Issue Date

CAN/CAS-C22.2 NO.60079-11(Ed. 6.0) 2014

CAN/CAS-C22.2 NO.60079-0(Ed. 6.0) 2015

FM Class 3611 2004

FM Class 3810 2005

FM Class 3600 2011

FM Class 3640 2013

FM Class 3610 2015

ANSI/IEC 60529(Ed. 4.0) 2004

ANSI/ISA 60079-0(12.00.01) (Ed. 6.0) 2013

ANSI/ISA 60079-11(12.02.01) (Ed. 6.0) 2012

ANSI/ISA 61010-1(82.02.01) (Ed. 3.0) 2012

ATEX

EN 60079-0 2012

EN 60079-11 2012

2. Items in the Package

Please unpack carefully and check if all items listed below are received. If any item is missing or

damaged, please contact your dealer.

Radio Battery Charger

Power Adapter Antenna Belt Clip

Strap Documentation Kit

Note

¾The pictures in this manual are for reference only.

¾The frequency band is marked on the label of antenna; if it is unavailable there, see the label on

the radio.

Table of contents

Popular Portable Radio manuals by other brands

Telefunken

Telefunken P5 operating manual

Tait

Tait TP9300 user guide

Lafayette

Lafayette Guardian 5500 operating instructions

Sailor

Sailor SP3300 Operation manual

Matra Nortel

Matra Nortel MC 6500 manual

Vertex Standard

Vertex Standard VX-P920 Series Brochure & specs

Roberts

Roberts Ecologic 3 user guide

LENCO

LENCO IPD-5100 user manual

Baofeng

Baofeng BF-82 user manual

Philips

Philips AE2110/04 Product information

Trevi

Trevi RA 764 user guide

TerraTec

TerraTec NOXONiRadio Detailed manual

M/A-Com

M/A-Com P5100 Series Operator's manual

Elta

Elta 6699 instruction manual

PURE

PURE ONE classic Series II owner's manual

Teac

Teac PR130 user manual

Philips

Philips AE6370 user manual

Simoco

Simoco SRP9170 user manual