Humminbird 360 Imaging User manual
360 Imaging™
Installation Guide
360 Imaging™
Installation Guide
532050-1_A
Thank ou!
Thank you for choosing Humminbird®, the #1 name in ishfinders. Humminbird® has
built its reputation by designing and manufacturing top-quality, thoroughly reliable
marine equipment. Your Humminbird® accessory is designed for trouble-free use in
even the harshest marine environment. In the unlikely event that your Humminbird®
accessory does require repairs, we offer an exclusive Service Policy - free of charge
during the first year after purchase, and available at a reasonable rate after the
one-year period. or complete details, see the separate warranty card included with
your accessory. We encourage you to read this manual carefully in order to get full
benefit from all the features and applications of your Humminbird® product.
Contact our Customer Resource Center at 1-800-633-1468 or visit our Web site at
humminbird.com.
WA NING! This device should not be used as a navigational aid to prevent collision,
grounding, boat damage, or personal injury. When the boat is moving, water depth may
change too quickly to allow time for you to react. Always operate the boat at very slow speeds
if you suspect shallow water or submerged objects.
WA NING! The electronic chart in your umminbird® unit is an aid to navigation designed
to facilitate the use of authorized government charts, not to replace them. Only official
government charts and notices to mariners contain all of the current information needed for
the safety of navigation, and the captain is responsible for their prudent use.
WA NING! umminbird® is not responsible for the loss of data files (waypoints, routes,
tracks, groups, recordings, etc.) that may occur due to direct or indirect damage to the unit’s
hardware or software. It is important to back up your control head’s data files periodically. Data
files should also be saved to your PC before restoring the unit’s defaults or updating the
software. See your umminbird® online account at humminbird.com and the Waypoint
Management Guide on your umminbird® Manual CD for details.
WA NING! Disassembly and repair of this electronic unit should only be performed by
authorized service personnel. Any modification of the serial number or attempt to repair
the original equipment or accessories by unauthorized individuals will void the warranty.
WA NING! This product contains chemicals known to the State of California to cause
cancer and/or reproductive harm.
NOTE: Some features discussed in this manual require a separate purchase, and some features
are only available on international models. Every effort has been made to clearly identify those
features. Please read the manual carefully in order to understand the full capabilities of your
model.
NOTE: The illustrations in this manual may not look the same as your control head, but your
product will function in the same way.
NOTE: To purchase accessories for your control head, visit our Web site at humminbird.com
or contact our Customer Resource Center at 1-800-633-1468.
NOTE: The procedures and features described in this manual are subject to change without
notice. This manual was written in English and may have been translated to another language.
umminbird® is not responsible for incorrect translations or discrepancies between documents.
NOTE: The installation of this advanced accessory should be performed by a qualified marine
technician.
360 Imaging™, 700 Series™, 800 Series™, 900 Series™, 1100 Series™, Humminbird®, WeatherSense®, and
X-Press™ Menu are trademarked by or registered trademarks of Johnson Outdoors Marine Electronics, Inc.
© 2012 Johnson Outdoors Marine Electronics, Inc. All rights reserved.
ATTENTION INTERNATIONAL CUSTOMERS: Products sold in the U.S. are not intended for
use in the international market. Humminbird® international units provide international
features and are designed to meet country and regional regulations. Languages, maps, time
zones, units of measurement, and warranty are examples of features that are customized
for Humminbird® international units purchased through our authorized international
distributors.
To obtain a list of authorized international distributors, please visit our Web site at
humminbird.com or contact our Customer Resource Center at (334) 687-6613.
Table of Contents
i
Introduction 1
Installation Overview 2
Install the GPS Receiver/ eading Sensor 6
1. Choose the Mounting Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.InstalltheSensor................................................... 7
A. Stem Mount with 1” - 14 Thread. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
B. Access Under the Mounting Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
C. No Access Under the Mounting Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3. Connect to the Control Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Install the Transducer Deployment System 16
1.InstallationOverview............................................... 16
2.ChoosetheMountingLocation........................................17
3.InstalltheTransomBracket...........................................20
4.InstalltheTransducerBracket.........................................22
5. Install the Transducer Deployment System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
6.RoutetheCablesandConnectPower ..................................27
7.TesttheInstallation.................................................31
Set up the Control ead 32
1.PoweronandConfirmConnections.................................... 32
2. Set up 360 Imaging™ on the Control Head. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
3. Test 360 Imaging™ on the Control Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
4. Confirm the Heading Sensor Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
5. Confirm the Baud Rate (for devices connected to the Sensor pigtail only) .......... 40
6.SetuptheNetworkandAlarms ...................................... 40
Power Off 41
Table of Contents
ii
Maintenance 42
Control Head Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
TransducerMaintenance.............................................. 43
Transducer Deployment System Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Troubleshooting 44
ishing System Doesn’t Power Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
ishing System Defaults to Simulator with a Transducer Attached . . . . . . . . . . . . . 45
The Pod Doesn’t Deploy or Retract . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
indingtheCauseofNoise.............................................47
Removing the Pod (for authorized repair only) 48
Reconnecting the Pod (for authorized repair only) 51
Specifications 54
Contact umminbird® 56
Introduction
This manual will guide you through the following installation requirements for the
360 Imaging™ Transducer Deployment System:
Installing the GPS Receiver/ eading Sensor
Installing the Transducer Deployment System
Connecting to the Control ead and Power
Testing the Installation
Powering Off
NOTE: The installation of this advanced accessory should be performed by a qualified marine
technician.
Before proceeding with this installation, the Humminbird® control head
should be installed. See your Humminbird® control head installation guide
for instructions. The 360 Imaging™ Transducer Deployment System can
be connected directly to the control head or to a Humminbird® Ethernet
Switch (optional) for networking. See the Ethernet Switch accessory guide
to install the Ethernet Switch.
1In roduc ion
1|Installation Overview
Before you start the installation, please take a moment to familiarize yourself with the
parts list and supplies list. We also encourage you to read the instructions beforehand
so that you may understand the installation requirements.
H
Q
G
F
D
E
A
B
C
L
J
K
I
N
O
P
M
2
Ins alla ion
Parts
The 360 Imaging™ Transducer Deployment System includes the following items:
Transducer Deployment System
Transom Bracket
(4) 5/16" - 18 Hex Lock Nuts
(4) 5/16" Split Ring Lock Washers
(4) 5/16" lat Washers
(4) 5/16" ender Washers
(4) 5/16" - 18, 3 1/2" Bolts
Transducer Bracket
(8) 1/4" - 20 lat Washers
(4) 1/4" Split Ring Lock Washers
(4) 1/4" - 20 Hex Lock Nuts
(2) 1/4" - 20, 3 3/4" Bolts
(2) 1/4" - 20, 3 1/4" Bolts
Anti-Seize Tube
GPS Receiver/ eading Sensor and screws for mounting
Power Cable (6', 2 m)
Ethernet Cable (20', 6 m)
Pod Cover (not shown)
NOTE: Product supplies and features are subject to change without notice.
Q
P
O
M
L
K
J
G
F
E
D
N
I
H
C
B
A
3Ins alla ion
Supplies
In addition to the hardware included with your Transducer Deployment System, you
will need the following supplies:
Drill with various drill bits
Electrical tape
Awl or pencil
1/2" & 7/16" sizes in wrenches, ratchets, and sockets
Torque wrench with 5 - 7 FT/LB capacity
3M Marine Adhesive Sealant 5200 (recommended)
or Marine Grade Adhesive Sealant
Marine-grade silicone caulk or sealant
Cable ties for cable routing
4' straight edge or level
Tape measure
8 A fuse
Safety goggles
Dust mask
Cables: Depending on your Humminbird® model and system configuration, you
may need to purchase additional cables, as shown below. Visit our Web site at
humminbird.com or call our Customer Resource Center at 1-800-633-1468.
•700 Series™ with Ethernet: To connect the Ethernet to the control head,
you will need to purchase the Ethernet Adapter Cable (AS EC QDE).
•Extention Cables are available for Ethernet and the GPS Receiver/Heading
Sensor.
•Y-Cable: If the COM port on the control head is already used by another
installed accessory, you will need to purchase a Humminbird® Y-Cable to
add the GPS Receiver/Heading Sensor to the installation.
4
Ins alla ion
Other manuals for 360 Imaging
2
Table of contents
Other Humminbird Accessories manuals
