Hubbell VSLT-UP User manual

A96462

VSLT-UP

8/13/2010

INSTALLATION INSTRUCTIONS CATALOG NUMBER

PART NO.APPRVDDATE

DATE REV.

16555 East Gale Avenue

City of Industry, CA 91745

(626)968-5666

24.86

4.16

8.31

11.16

8.16

1.28

2.07

4.14

(4)O.39"

THRU HOLES

O1.75

WIRE

WAY

(BY OTHERS)

INCOMING

WIRE LEADS

MOUNTING

HARDWARE

(BY OTHERS)

MOUNTING

SILICONE

ALL SURFACES

FIXTURE

ASSEMBLY

MOUNTING PLATE

JUNCTION BOX

EGRESS

LAMP SOCKET

EGRESS

EGRESS WIRING

TO 12 VOLT DC

(BEHIND PLATE)

WIRE CONNECTIONS

(BY OTHERS)

TURN OFF POWER.

RE-LAMPING:

LAMP

MOUNTING PLATE

FRONT VIEW

SET SCREW

(4) P/N A84267

1/4-20 UNC X .63 LG

INSTALLATION COMPLETE.4.

1. TURN OFF POWER.

BALLAST SERVICING:

LAMP SOCKET

TURN OFF POWER.

INSTALLATION

SERVICE BALLAST.3.

SURFACE

1. TURN OFF POWER.

EQUIPMENT GROUND.

1. PULL INCOMING WIRE LEADS THROUGH WIREWAY

NOTE: TO BE MOUNTED INDEPENDENT OF JUNCTION

BOX. (MOUNTING HARDWARE BY OTHERS)

MAKE WIRE CONNECTIONS FROM INCOMING WIRE

LEADS TO FIXTURE ASSEMBLY. (WHITE TO WHITE,

BLACK TO BLACK, GREEN TO GREEN.)

NOTE: CONNECT GREEN GROUND LEAD TO

MEETS THE MOUNTING SURFACE.

THE EGRESS SOCKET MUST BE WIRED TO A

SEPARATE EMERGENCY CIRCUIT (12 VOLT D.C.)

MAKE WIRE CONNECTIONS.

RETURN FIXTURE HEAD ASSEMBLY TO TOP OF BODY

AND SECURE WITH (4) 1/4-20 x 5/8" SET SCREWS.

INSTALLATION COMPLETE

PLATE DISCONNECT WIRES. FIXTURE MUST BE

SUPPORTED DURING SERVICING.

REMOVE (3) 8-32 CAPTIVE SCREWS FROM TOP LID. PULL

UP ON LID TO ACCESS LAMP SOCKET, AND INSTALL LAMP.

RETURN LID AND SCREWS TO ORIGINAL POSITION

AND TIGHTEN SCREWS SECURELY.

LOOSEN (4) 1/4-20 x 5/8" SET SCREWS ON WALL CANOPY

LOOSEN (4) 1/4-20 x 5/8" SET SCREWS ON WALL

CANOPY AND LIFT FIXTURE ASSEMBLY AWAY

RE-LAMPING EGRESS LAMP

INSTALLATION COMPLETE.

REMOVE MR-11 LAMP FROM SOCKET AND REPLACE.

(4) 1/4-20 x 5/8" SET SCREWS.

INSTALLATION COMPLETE.

SECURE WITH (4) 1/4-20 x 5/8" SET SCREWS.

FROM MOUNTING PLATE.

AND LIFT FIXTURE ASSEMBLY AWAY FROM MOUNTING

(3) 8-32 CAPTIVE

SCREWS

AND SECURE MOUNTING PLATE TO MOUNTING SURFACE.

SECURE FIXTURE ASSEMBLY TO MOUNTING PLATE WITH

SILICONE ALL AROUND MOUNTING PLATE WHERE PLATE

RETURN FIXTURE ASSEMBLY TO MOUNTING PLATE AND

A96463

VSTL-DOWN

INSTALLATION INSTRUCTIONS CATALOG NUMBER

PART NO.APPRVDDATE

DATE REV.

16555 East Gale Avenue

City of Industry, CA 91745

(626)968-5666

11.16

8.16

1.28

2.07

4.14

4.16

8.31

24.86

O1.75"

WIRE

WAY

(4) O.39"

THRU HOLES

FIXTURE

SILICONE

(3) 8-32 CAPTIVE

SCREWS

LAMP

RE-LAMPING:

ALL SURFACES

EGRESS WIRING

TO 12 VOLT DC

(BEHIND PLATE)

JUNCTION BOX

(BY OTHERS)

WIRE CONNECTIONS

(BY OTHERS)

WIRE LEADS

LAMP SOCKET

WOUNTING PLATE

INCOMING

MOUNTING

SURFACE

MOUNTING

HARDWARE

(BY OTHERS)

1/4-20 UNC X .63 LG

INSTALLATION COMPLETE.

TURN OFF POWER.

BALLAST SERVICING:

TURN OFF POWER.

EGRESS

LAMP SOCKET

EGRESS

MOUNTING PLATE

FRONT VIEW

TURN OFF POWER.

RE-LAMPING EGRESS LAMP

EQUIPMENT GROUND.

TURN OFF POWER.

INSTALLATION

SERVICE BALLAST.

SET SCREW

(4) P/N A84267

ASSEMBLY

FROM MOUNTING PLATE.

SUPPORTED DURING SERVICING.

REMOVE (3) 8-32 CAPTIVE SCREWS FROM TOP LID. PULL

UP ON LID TO ACCESS LAMP SOCKET, AND INSTALL LAMP.

RETURN LID AND SCREWS TO ORIGINAL POSITION

AND TIGHTEN SCREWS SECURELY.

LOOSEN (4) 1/4-20 x 5/8" SET SCREWS ON WALL CANOPY

LOOSEN (4) 1/4-20 x 5/8" SET SCREWS ON WALL

CANOPY AND LIFT FIXTURE ASSEMBLY AWAY

INSTALLATION COMPLETE.

REMOVE MR-11 LAMP FROM SOCKET AND REPLACE.

SECURE FIXTURE ASSEMBLY TO MOUNTING PLATE WITH

(4) 1/4-20 x 5/8" SET SCREWS.

INSTALLATION COMPLETE.

RETURN FIXTURE ASSEMBLY TO MOUNTING PLATE AND

SECURE WITH (4) 1/4-20 x 5/8" SET SCREWS.

PULL INCOMING WIRE LEADS THROUGH WIREWAY

NOTE: TO BE MOUNTED INDEPENDENT OF JUNCTION

BOX. (MOUNTING HARDWARE BY OTHERS)

MAKE WIRE CONNECTIONS FROM INCOMING WIRE

LEADS TO FIXTURE ASSEMBLY. (WHITE TO WHITE,

BLACK TO BLACK, GREEN TO GREEN.)

NOTE: CONNECT GREEN GROUND LEAD TO

SILICONE ALL AROUND MOUNTING PLATE WHERE PLATE

MEETS THE MOUNTING SURFACE.

THE EGRESS SOCKET MUST BE WIRED TO A

SEPARATE EMERGENCY CIRCUIT (12 VOLT D.C.)

MAKE WIRE CONNECTIONS.

RETURN FIXTURE HEAD ASSEMBLY TO TOP OF BODY

AND SECURE WITH (4) 1/4-20 x 5/8" SET SCREWS.

INSTALLATION COMPLETE

PLATE DISCONNECT WIRES. FIXTURE MUST BE

AND LIFT FIXTURE ASSEMBLY AWAY FROM MOUNTING

AND SECURE MOUNTING PLATE TO MOUNTING SURFACE.

A96464

VSTS-DOWN

INSTALLATION INSTRUCTIONS CATALOG NUMBER

PART NO.APPRVDDATE

DATE REV.

16555 East Gale Avenue

City of Industry, CA 91745

(626)968-5666

(BY OTHERS)

FIXTURE

LAMP SOCKET

MOUNTING PLATE

MOUNTING

SURFACE

MOUNTING

HARDWARE

WIRE CONNECTIONS

(BY OTHERS)

INCOMING

WIRE LEADS

SILICONE

ALL SURFACES

EGRESS WIRING

TO 12 VOLT DC

(BEHIND PLATE)

JUNCTION BOX

(BY OTHERS)

(4) 8-32 CAPTIVE

SCREWS

SET SCREW

(4) P/N A84267

1/4-20 UNC X .63 LG

INSTALLATION COMPLETE.4.

1. TURN OFF POWER.

BALLAST SERVICING:

1. TURN OFF POWER.

RE-LAMPING:

EGRESS

LAMP SOCKET

EGRESS

LAMP

FRONT VIEW

1. TURN OFF POWER.

EQUIPMENT GROUND.

1. TURN OFF POWER.

INSTALLATION

SERVICE BALLAST.3.

ASSEMBLY

3. RETURN FIXTURE ASSEMBLY TO MOUNTING PLATE AND

SECURE WITH (4) 1/4-20 x 5/8" SET SCREWS.

FROM MOUNTING PLATE.

PULL INCOMING WIRE LEADS THROUGH WIREWAY

NOTE: TO BE MOUNTED INDEPENDENT OF JUNCTION

BOX. (MOUNTING HARDWARE BY OTHERS)

MAKE WIRE CONNECTIONS FROM INCOMING WIRE

LEADS TO FIXTURE ASSEMBLY. (WHITE TO WHITE,

BLACK TO BLACK, GREEN TO GREEN.)

NOTE: CONNECT GREEN GROUND LEAD TO

MEETS THE MOUNTING SURFACE.

THE EGRESS SOCKET MUST BE WIRED TO A

SEPARATE EMERGENCY CIRCUIT (12 VOLT D.C.)

MAKE WIRE CONNECTIONS.

RETURN FIXTURE HEAD ASSEMBLY TO TOP OF BODY

AND SECURE WITH (4) 1/4-20 x 5/8" SET SCREWS.

INSTALLATION COMPLETE

SUPPORTED DURING SERVICING.

REMOVE (4) 8-32 CAPTIVE SCREWS FROM TOP LID. PULL

UP ON LID TO ACCESS LAMP SOCKET, AND INSTALL LAMP.

RETURN LID AND SCREWS TO ORIGINAL POSITION

AND TIGHTEN SCREWS SECURELY.

LOOSEN (4) 1/4-20 x 5/8" SET SCREWS ON WALL CANOPY

AND LIFT FIXTURE ASSEMBLY AWAY FROM MOUNTING

MOUNTING PLATE

LOOSEN (4) 1/4-20 x 5/8" SET SCREWS ON WALL

CANOPY AND LIFT FIXTURE ASSEMBLY AWAY

RE-LAMPING EGRESS LAMP

INSTALLATION COMPLETE.

REMOVE MR-11 LAMP FROM SOCKET AND REPLACE.

(4) 1/4-20 x 5/8" SET SCREWS.

INSTALLATION COMPLETE.

6. PLATE DISCONNECT WIRES. FIXTURE MUST BE

AND SECURE MOUNTING PLATE TO MOUNTING SURFACE.

SECURE FIXTURE ASSEMBLY TO MOUNTING PLATE WITH

SILICONE ALL AROUND MOUNTING PLATE WHERE PLATE

3.44

5.75

2.37

4.75

13.37

(4) O.39"

THRU HOLES

O1.75"

WIRE

WAY

2.07

4.12

A96465

VSTS-UP

INSTALLATION INSTRUCTIONS CATALOG NUMBER

PART NO.APPRVDDATE

DATE REV.

16555 East Gale Avenue

City of Industry, CA 91745

(626)968-5666

MOUNTING PLATE

MOUNTING

SURFACE

MOUNTING

HARDWARE

(BY OTHERS)

SILICONE

EGRESS

ALL SURFACES

EGRESS WIRING

TO 12 VOLT DC

(BEHIND PLATE)

JUNCTION BOX

(BY OTHERS)

WIRE CONNECTIONS

(BY OTHERS)

INCOMING

WIRE LEADS

RE-LAMPING:

LAMP SOCKET

EGRESS

LAMP

FRONT VIEW

SET SCREW

(4) P/N A84267

1/4-20 UNC X .63 LG

1. TURN OFF POWER.

BALLAST SERVICING:

(4) 8-32 CAPTIVE

SCREWS

1. TURN OFF POWER.

INSTALLATION

SERVICE BALLAST.3.

1. TURN OFF POWER.

EQUIPMENT GROUND.

FIXTURE

ASSEMBLY

BLACK TO BLACK, GREEN TO GREEN.)

NOTE: CONNECT GREEN GROUND LEAD TO

MEETS THE MOUNTING SURFACE.

THE EGRESS SOCKET MUST BE WIRED TO A

SEPARATE EMERGENCY CIRCUIT (12 VOLT D.C.)

MAKE WIRE CONNECTIONS.

RETURN FIXTURE HEAD ASSEMBLY TO TOP OF BODY

AND SECURE WITH (4) 1/4-20 x 5/8" SET SCREWS.

INSTALLATION COMPLETE

SUPPORTED DURING SERVICING.

REMOVE (4) 8-32 CAPTIVE SCREWS FROM BOTTOM LID.

PULL ON LID TO ACCESS LAMP SOCKET, INSTALL LAMP.

RETURN LID AND SCREWS TO ORIGINAL POSITION

AND TIGHTEN SCREWS SECURELY.

INSTALLATION COMPLETE.

LOOSEN (4) 1/4-20 x 5/8" SET SCREWS ON WALL CANOPY

AND LIFT FIXTURE ASSEMBLY AWAY FROM MOUNTING

MOUNTING PLATE

LOOSEN (4) 1/4-20 x 5/8" SET SCREWS ON WALL

CANOPY AND LIFT FIXTURE ASSEMBLY AWAY

RE-LAMPING EGRESS LAMP

INSTALLATION COMPLETE.

REMOVE MR-11 LAMP FROM SOCKET AND REPLACE.

(4) 1/4-20 x 5/8" SET SCREWS.

INSTALLATION COMPLETE.

SECURE WITH (4) 1/4-20 x 5/8" SET SCREWS.

FROM MOUNTING PLATE.

PULL INCOMING WIRE LEADS THROUGH WIREWAY

NOTE: TO BE MOUNTED INDEPENDENT OF JUNCTION

BOX. (MOUNTING HARDWARE BY OTHERS)

MAKE WIRE CONNECTIONS FROM INCOMING WIRE

LEADS TO FIXTURE ASSEMBLY. (WHITE TO WHITE,

6. PLATE DISCONNECT WIRES. FIXTURE MUST BE

AND SECURE MOUNTING PLATE TO MOUNTING SURFACE.

SECURE FIXTURE ASSEMBLY TO MOUNTING PLATE WITH

SILICONE ALL AROUND MOUNTING PLATE WHERE PLATE

RETURN FIXTURE ASSEMBLY TO MOUNTING PLATE AND

3.44

5.75

2.07

2.37

4.75

18.37

4.12

O1.75"

WIRE

WAY

(4) O.39

THRU HOLES

Table of contents

Other Hubbell Lighting Equipment manuals

Hubbell

Hubbell Kim Lighting Lightvault LTV59 User manual

Hubbell

Hubbell Dual Lite EZ-2R Series Manual

Hubbell

Hubbell LITEFRAME LC4 User manual

Hubbell

Hubbell PRS User manual

Hubbell

Hubbell DUAL LITE EVE Series User manual

Hubbell

Hubbell DUAL LITE PG Series User manual

Hubbell

Hubbell Laredo User manual

Hubbell

Hubbell Laredo LMC User manual

Hubbell

Hubbell Dual-Lite UFO-LP1 User manual

Hubbell

Hubbell SAVVANO User manual

Hubbell

Hubbell KILLARK VEB Series Instruction Manual

Hubbell

Hubbell Dual-Lite EV4D-02WAL Series Manual

Hubbell

Hubbell WPH Series User manual

Hubbell

Hubbell DUAL LITE N4X4 User manual

Hubbell

Hubbell M-7679 R-PAC User manual

Hubbell

Hubbell NXP2 Series User manual

Hubbell

Hubbell Dual Lite CVEC15 User manual

Hubbell

Hubbell Laredo LMC User manual

Hubbell

Hubbell ExpressLine Miniliter IV MHSY Series User manual

Hubbell

Hubbell KIM LIGHTING LIGHTVAULT LTV55 User manual

Hubbell

Hubbell Dual-Lite DYNC C1D2 Series User manual

Hubbell

Hubbell ALFW-6LU-5KBZ Series User manual

Hubbell

Hubbell DUAL LITE LN4X Series Owner's manual

Hubbell

Hubbell NutriLED Series User manual

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions