Huawei UPS5000-S-1600KVA-FP User manual

1Overview

Model UPS5000-S-1600KVA-FP

Dimensions (H x W x D) 2200 mm x 4200 mm x 1000 mm

Issue: 03

Part Number: 31500DDE

Date: 2020-03-03

UPS5000-S-1600 kVA Quick Guide

1. Before installation, read the user manual carefully to get familiar with product information and

safety precautions.

2. Use insulated tools during installation and operation.

3. Only engineers certified by Huawei or its agents are allowed to install, commission, and maintain

the UPS. Otherwise, personal injury or equipment damage may occur, and the UPS faults

caused are beyond the warranty scope of Huawei.

Power unit 1 Power unit 2 Bypass unit Input and

output unit 1 Input and

output unit 2 Power unit 3

(1) Surge protective device (SPD) box

(2)

Power modules

(3)

Bypass module

(4) Monitoring module

(5)

SPD and SPD switch

(6)

Bypass control module

) Output circuit breaker of power

unit 2 (Q5

-2)

) Input circuit breaker of

power unit 2 (Q1

-2)

(9)

Input circuit breaker of

power unit 1 (Q1

-1)

(10

) Output circuit breaker of power

unit 1 (Q5

-1)

(11

) Output circuit breaker of

power unit 3 (Q5

-3)

(12

) Input circuit breaker of

power unit 3 (Q1

-3)

Determining the UPS Installation Position2.1

The UPS can be installed on the channel steel or floor. Determine the mounting hole positions using

a marking-off template (unit: mm), drill holes, and install expansion sleeves based on site

requirements.

2Installing the UPS

Dimensionsof the Cabinet Holes

Bypass unit and input

and output unit

A: Mounting holes on the channel steel

B: Mounting holes on the floor

Power unit

Combiningthe Power Units and Bypass Unit2.2

1. Remove the left and right side panels from the input and output unit.

2. Combine the power units, bypass unit and input/output units, and install the connecting plates in

the following sequence: bottom, top, and middle.

4. Secure the UPS.

3. Install the side panels removed from the input and output unit to power unit 1 and power unit 3.

(A) Mounting holes on the channel steel: M12x60 bolts

(B) Mounting holes on the floor: M12x60 expansion bolts

Channel steel or bolts are not included.

5. Install anchor baffle plates.

1. Remove the front panels and dustproof covers from the top of the cabinets, and remove the

connecting kits at both ends of the top of the power unit 1 unit and power unit 3.

Installing Busbars2.3

•Before handling a busbar, wear protective gloves to avoid getting injured by sharp edges.

•Move a busbar with caution to avoid scratching cabinets.

•Each busbar weighs about 50 kg. Be cautious to avoid injury when moving heavy objects.

Preparation: two scaling ladders that are more than one meter high

At least two persons are required to carry a busbar. At least two persons are required to hold

the busbar on the top of the cabinet.

•When moving a busbar, hold both ends of the busbar component. It is recommended that

the soft copper bar face downward.

•Do not move the busbar upward by holding the soft copper bar.

2. Install the U-shaped sealing plate component (numbered 01).

4. Use copper bars (numbered 04–06) to connect the busbar components (numbered 02 and 03).

Before installation, remove the screws that are partially tightened from the busbar component.

The two insulators do not need

to be secured with screws.

Busbar Component (numbered 03)

Busbar component (numbered 02)

3. Install busbar components (numbered 02 and 03).

6. Install the left sealing plate (numbered 08).

7. Install the side sealing plate (numbered 09) for the input and output unit.

Busbar component (numbered 07)

5. Install the busbar component (numbered 07) and secure it to the cabinet.

9. Install the rear sealing plate (numbered 11) for the power unit 1 and power unit 2.

10.Install the sealing plates (numbered 12) for the bypass unit and input and output unit.

8. Install the side sealing plate (numbered 10) for power unit 3.

12.Install the busbar (numbered 14) for power unit 3.

13.Install the front and rear sealing plates (numbered 15 and 16) for input and output unit 2.

11.Install the sealing plates (numbered 13) for power unit 3.

15.Install supports for the busbar covers.

16.Install the sealing plate of battery wiring protective cover for each power unit.

14.Install the right sealing plate (numbered 17) for power unit 3.

18.Install the top busbar covers.

17.Install mounting plates (the left and right mounting plates are numbered 18).

Power unit 1

plate Power unit 2

plate Bypass unit

plate Input and output

unit 1 plate Input and

output

unit 2 plate

Power unit 3

plate

Table of contents

Other Huawei UPS manuals

Huawei

Huawei UPS5000-A-400 kVA User manual

Huawei

Huawei UPS5000-E-300K-SM User manual

Huawei

Huawei UPS2000-G-6KRTS User manual

Huawei

Huawei UPS5000-S-600 User manual

Huawei

Huawei PDU8000 Series User manual

Huawei

Huawei FusionPower6000 Operating manual

Huawei

Huawei UPS5000-E-60K-F60 User manual

Huawei

Huawei UPS2000-G-6KRTLL User manual

Huawei

Huawei UPS5000 User manual

Huawei

Huawei UPS5000-S-600 User manual

Huawei

Huawei UPS5000-E-400K-SM User manual

Huawei

Huawei UPS5000-S-1200 kVA User manual

Huawei

Huawei UPS5000-A series User manual

Huawei

Huawei UPS5000-E Series User manual

Huawei

Huawei UPS5000-E Series User manual

Huawei

Huawei UPS2000-G Series User manual

Huawei

Huawei PowerCube 500 User manual

Huawei

Huawei UPS5000-E Series User manual

Huawei

Huawei UPS5000-H-600 kVA-FT User manual

Huawei

Huawei UPS2000-G Series User manual

Huawei

Huawei UPS5000-E-25 kVA-BF User manual

Huawei

Huawei UPS5000-E-BF Series User manual

Huawei

Huawei UPS5000-E Series User manual

Huawei

Huawei PDU8000 Series User manual

Popular UPS manuals by other brands

Pylontech

Pylontech Victron & Pylontech US5000 manual

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 user manual

Mecer

Mecer ME-1000-WTU user manual

Mustek

Mustek PowerMust 530(B) Plus Startup manual

Emerson

Emerson Liebert NXL series Operation and maintenance manual

MAKELSAN

MAKELSAN BOXER SERIES user manual

Block

Block PC-0524-400-0 manual

CyberPower

CyberPower CP585LCD user manual

Eaton

Eaton 3S Advanced user's guide

CyberPower

CyberPower Office Tower Series UPS 1000 user manual

CyberPower

CyberPower BM100 quick start guide

Best Power

Best Power 610 quick start guide

Best Power

Best Power Unity/I UT3K user manual

Mustek

Mustek PowerMust 400 Offline user manual

Xantrex

Xantrex Trace 512 UR-UPS owner's manual

Forza

Forza SL-1501UL user manual

LEGRAND

LEGRAND keor 310081 quick start guide

ABB

ABB Conceptpower DPA 500 operating manual