Huawei K562e User manual
K562e
Quick Start-02
Issue 02
Date 2021-06-25
HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2021. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specied in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every eort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: https://www.huawei.com
Email: [email protected]
Issue 02 (2021-06-25) Copyright © Huawei Technologies Co., Ltd. i
Contents
1 Product Overview.................................................................................................................... 1
2 Network Expansion................................................................................................................. 4
2.1 Wireless Network Expansion............................................................................................................................................... 4
2.2 Wired Network Expansion....................................................................................................................................................5
3 Network Management...........................................................................................................7
4 Specications............................................................................................................................8
5 FAQs............................................................................................................................................ 9
K562e
Quick Start-02 Contents
Issue 02 (2021-06-25) Copyright © Huawei Technologies Co., Ltd. ii
1 Product Overview
Huawei OptiXstar K562e is an edge router (AX3000Mbps Wi-Fi 6 Edge ONT) that
supports dual-band Wi-Fi 6. It provides users with gigabit broadband access using
Ethernet/Wi-Fi uplink technologies.
Description of Indicators
Indicator State Description
Power Steady blue The device is powered on.
O The device is powered o.
Internet Steady blue The device is connected to the Internet.
Blinking blue The device is connected to the Internet and data is
being transmitted.
Steady red ● When functioning as a router, a network cable is
connected to the network port, but Internet
access is unavailable.
● When functioning as a Wi-Fi repeater, the
device is connected to the Wi-Fi network of the
router but cannot access the Internet.
O ● When functioning as a router, no network cable
is connected to the network port.
● When functioning as a Wi-Fi repeater, the
device is not connected to the Wi-Fi network of
the router.
Ethernet Steady blue Any GE port is connected to an Ethernet device (for
example, a computer) with a network cable.
Blinking blue Data is being transmitted on any GE port.
K562e
Quick Start-02 1 Product Overview
Issue 02 (2021-06-25) Copyright © Huawei Technologies Co., Ltd. 1
Indicator State Description
O None of the four GE ports are connected with a
network cable.
WLAN Steady blue Wi-Fi is enabled.
Blinking blue WPS pairing is in progress.
O Wi-Fi is disabled (enabled by default).
Ports and Buttons
No. K562e Description
1 Network
ports
The port is auto-negotiated to a LAN port when connected
to a computer or STB, and to a WAN port when connected
to the LAN port of an Internet gateway.
2 Reset
button
When the K562e is starting, use a needle-shaped object to
press and hold this button for more than 2 seconds until all
indicators turn o. After the device restarts and the Power
indicator turns on, the factory settings are restored.
NOTE
Exercise caution when pressing the button. If you cannot access the
Internet after the device is restored to factory settings, contact your
service provider for help.
3 Power Connects to the power adapter.
4WPS Enables the WPS pairing function.
K562e
Quick Start-02 1 Product Overview
Issue 02 (2021-06-25) Copyright © Huawei Technologies Co., Ltd. 2
NO TE
● The K562e can only be used indoors. It can be mounted onto a wall or be placed
horizontally on a desktop. Do not install it in other modes, such as on the ceiling.
● Keep a clearance of more than 10 cm around the device to ensure proper ventilation.
● Keep the device away from electric appliances that generate strong magnetic or electric
elds, such as microwave ovens.
● The gures shown in this document may dier from the actual products, but the
dierences do not aect the functions of the products.
K562e
Quick Start-02 1 Product Overview
Issue 02 (2021-06-25) Copyright © Huawei Technologies Co., Ltd. 3
2 Network Expansion
2.1 Wireless Network Expansion
When you already have Wi-Fi in your home and need to expand the Wi-Fi
coverage, you can use the WPS button to connect the K562e to the existing Wi-Fi
network.
NO TICE
● This section assumes that your home network supports WPS features. If your
home network does not support WPS features, you can log in to the K562e web
page to congure parameters and expand Wi-Fi.
● Three-level Wi-Fi cascading is not allowed on the K562e network. A maximum
of two-level Wi-Fi cascading is supported.
WPS Code Pairing Operation Guide
1. Place the K562e close to the home gateway (within 2 meters) and power it
on.
2. After the K562e starts up, press and hold the WPS buttons of the K562e and
the home gateway for 3 to 5 seconds in turn within 2 minutes.
NO TE
The WLAN indicator of the K562e blinks during the pairing.
K562e
Quick Start-02 2 Network Expansion
Issue 02 (2021-06-25) Copyright © Huawei Technologies Co., Ltd. 4
3. After the WLAN and Internet indicators of the K562e turn steady blue, the
K562e is connected to the Internet.
4. Move the K562e to a room where you need to expand Wi-Fi and power it on.
After the Internet indicator turns steady blue, Wi-Fi is expanded successfully.
NO TE
If your home gateway is a Huawei smart gateway (consult your device provider for more
information), the Wi-Fi SSID and password of the gateway will be automatically
synchronized to the K562e. Otherwise, use the Wi-Fi SSID and password of the K562e (see
the nameplate at the bottom) to access the Internet.
Layout Principles
NO TE
You can also check on the LinkHome app whether the distance between the K562e and the
home gateway is optimal.
2.2 Wired Network Expansion
If you have a wired network but have no Wi-Fi at home, you can connect the
K562e to the wired network using a network cable to set up a Wi-Fi network.
NO TICE
This section assumes that there is no Wi-Fi in your home. If you have a Wi-Fi
network at home, you can also refer to this section to expand the network.
1. Connect cables.
a. Use a network cable to connect the any of the 4 network ports of K562e
and the LAN port of the home gateway.
b. Connect the K562e power cable to a nearby power outlet.
K562e
Quick Start-02 2 Network Expansion
Issue 02 (2021-06-25) Copyright © Huawei Technologies Co., Ltd. 5
NO TE
If your home gateway is a Huawei smart gateway (consult your device provider for
more information), the Wi-Fi SSID and password of the gateway will be automatically
synchronized to the K562e, and there is no need to reset the Wi-Fi parameters of the
K562e.
2. Set Wi-Fi parameters for the K562e.
a. Connect a mobile phone or computer to the K562e Wi-Fi (no password).
For the Wi-Fi name, see the SSID on the device nameplate.
b. Open the browser and enter the IP address (see the nameplate at the
bottom of the K562e).
c. Enter the login username and password (see the nameplate at the
bottom of the K562e).
d. Click Start, modify the Wi-Fi SSID and password on the My Wi-Fi page,
and reconnect to the new Wi-Fi to access the Internet.
K562e
Quick Start-02 2 Network Expansion
Issue 02 (2021-06-25) Copyright © Huawei Technologies Co., Ltd. 6
3 Network Management
1. Scan the QR code using a smartphone to download and install the LinkHome
app.
NO TE
If the app is already installed on your phone, make sure you have the latest version of
the app.
2. You can log in to the LinkHome app from a smartphone to view and manage
your home Wi-Fi network.
K562e
Quick Start-02 3 Network Management
Issue 02 (2021-06-25) Copyright © Huawei Technologies Co., Ltd. 7
Table of contents
Other Huawei Network Router manuals
Huawei
Huawei Quidway S3000-EI Series User manual
Huawei
Huawei Pocket WiFi 4G Installation and operation manual
Huawei
Huawei Quidway NetEngine40E Guide
Huawei
Huawei EchoLife HG8247H Setup guide
Huawei
Huawei AR1200 Series User manual
Huawei
Huawei AR120 Series Technical specifications
Huawei
Huawei WS5200 Technical specifications
Huawei
Huawei AR600 Series User manual
Huawei
Huawei B593 Product information sheet
Huawei
Huawei EchoLife BM625 WiMAX CPE User manual
Huawei
Huawei Quidway S9300 User manual
Huawei
Huawei Mobile wifi e5330 User manual
Huawei
Huawei B315 Series User manual
Huawei
Huawei AR100 Series User manual
Huawei
Huawei AOLYNK S1505L User manual
Huawei
Huawei EchoLife HG8245 User manual
Huawei
Huawei B310 User manual
Huawei
Huawei B593 User manual
Huawei
Huawei NetEngine5000E User manual
Huawei
Huawei quidway s7700 User manual
