Huawei EG8143A5 User manual

EchoLife EG8143A5

Quick Start for QR code (5dBi)

Issue 01

Date 2020-07-08

HUAWEI TECHNOLOGIES CO., LTD.

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and

the customer. All or part of the products, services and features described in this document may not be

within the purchase scope or the usage scope. Unless otherwise specied in the contract, all statements,

information, and recommendations in this document are provided "AS IS" without warranties, guarantees

or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every eort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: https://www.huawei.com

Email: [email protected]

Contents

1 Placing the Device................................................................................................................... 1

2 Connecting Cables................................................................................................................... 3

3 Indicator Description.............................................................................................................. 5

4 Technical Specications......................................................................................................... 7

5 FAQs............................................................................................................................................ 8

EchoLife EG8143A5

Quick Start for QR code (5dBi) Contents

1 Placing the Device

NO TE

● Do not install the ONT outdoors or in an outdoor cabinet.

● The ONT can be mounted onto a wall or placed on a desk. Do not install the ONT in

other modes, such as ceiling.

● Keep 10 cm clearance on all sides to ensure adequate ventilation.

● It is recommended that the computer and ONT be put far away from electric appliances

that generate strong magnetic or electric elds, such as microwave ovens.

Mounting an ONT on the Desk

The gure below shows an ONT that is horizontally placed on a desk.

EchoLife EG8143A5

Quick Start for QR code (5dBi) 1 Placing the Device

NO TE

The appearance shown in this document may be dierent from the actual appearance of

the product. The actual product prevails.

Mounting an ONT onto a Wall

1. Mark two positions with the same spacing as that between the two mounting

holes of the ONT using a marker on a wall.

2. Select a proper drill bit according to the outer diameter of the screws. Use a

hammer drill to drill the marked positions on the wall. Then clean the holes

and install two expansion bolts.

3. Use a screwdriver to fasten the screws into the expansion bolts, reserving 5

mm ends out of the wall, and mount the ONT onto the screws.

NO TE

It is recommended that the screw be about 4 mm in diameter and longer than 20 mm.

EchoLife EG8143A5

Quick Start for QR code (5dBi) 1 Placing the Device

2 Connecting Cables

EchoLife EG8143A5

Quick Start for QR code (5dBi) 2 Connecting Cables

NO TE

● The ber connector connected to the optical port on the wall varies depending on

actual conditions.

● To ensure normal use of bers, make sure that the ber bending radius is larger than 30

mm.

No. Item Description

1 TEL Connects to the ports on a telephone or fax machine.

2 LAN1-LAN4 Connects to PCs or IP set-top boxes (STBs).

3 Power Connects to a power adapter.

4On/O Powers the ONT on or o.

5 CATV Connects to a TV.

6 Reset Press the button for a short time to reset the device, or

press the button for a long time (longer than 10s) to

restore the device to the default settings and reset the

device.

NOTE

Reset Huawei ONTs with caution. Otherwise, the ONTs may

fail to access the Internet. If an ONT cannot access the

Internet after a reset, contact your Internet service provider.

7 WPS When the WLAN is on, press the WPS button (> 3s)

and release the button to start Wi-Fi protected setup

(WPS) negotiation.

8 WLAN Used to enable or disable the WLAN function

- When the WLAN is disabled, press the WLAN button

(> 3s) and release the button to enable the WLAN.

- When the WLAN is enabled, press the WLAN button

(> 3s) and release the button to disable the WLAN.

9 Optical port The optical port is equipped with a rubber plug and

connected to a ber for upstream transmission.

The type of the optical connector connected to the

optical port can be SC/APC.

EchoLife EG8143A5

Quick Start for QR code (5dBi) 2 Connecting Cables

3 Indicator Description

Indicator Status Description

Power Steady on The ONT is powered on.

O The power supply is cut o.

PON/LOS See the following table.

LAN1-

LAN4

Steady on The Ethernet connection is in the normal

state.

Blinking Data is being transmitted over the Ethernet

port.

O The Ethernet connection is not set up.

TEL Steady on The ONT is registered with the softswitch but

no service ows are transmitted.

Blinks twice a

second

The ONT is registered with the softswitch,

and data is being transmitted on the port.

Blinks once every

2 seconds

The ONT fails to be registered with the

softswitch.

O The POTS port is disabled.

WLAN Steady on The WLAN function is enabled.

Blinking Data is being transmitted over the WLAN

port.

O The WLAN function is disabled.

WPS Steady on The WPS function is enabled.

Blinking A Wi-Fi terminal is accessing the system.

EchoLife EG8143A5

Quick Start for QR code (5dBi) 3 Indicator Description

Indicator Status Description

O The WPS function is disabled.

CATV Steady on The CATV function is enabled and CATV

signals are received.

O The CATV function is disabled or no CATV

signal is received.

Statu

s No.

PON Status LOS Status Description

1O O The ONT is prohibited by the

upper-layer device or blinks

abnormally. Contact the service

provider for help.

2 Blinks twice a

second

Blinks twice a

second

3 Blinks twice a

second

O The ONT attempts to set up a

connection with its upper-layer

device.

4 Steady on O A connection is set up between the

ONT and its upper-layer device.

5O Blinks once

every 2 seconds

The ONT is not connected to bers

or does not receive optical signals.

6 Blinks once

every 2

seconds

Blinks once

every 2 seconds

The hardware is faulty.

NO TE

If the ONT is not powered on or the power switch is turned o, all indicators are o.

EchoLife EG8143A5

Quick Start for QR code (5dBi) 3 Indicator Description

4 Technical Specications

Product Function

EG8143A5(5dBi) ● 4 Ethernet ports (1GE + 3FE)

● 1 POTS port

● 1 CATV port

● 2.4 GHz Wi-Fi

● Power adapter input: See the nameplate on the adapter.

● System power supply: See the nameplate on the device.

● Ambient temperature: 0ºC to +40ºC

● Ambient humidity: 5%–95% (non-condensing)

● Dimensions (H x W x D): 34 mm × 175 mm × 115 mm (without external

antenna and pads)

● Weight: About 269 g

● Maximum system power consumption: 12 W

EchoLife EG8143A5

Quick Start for QR code (5dBi) 4 Technical Specications

Other manuals for EG8143A5

Table of contents

Other Huawei Network Router manuals

Huawei

Huawei SmartAX MT882 User manual

Huawei

Huawei EchoLife HG8247H Setup guide

Huawei

Huawei WS5200 Technical specifications

Huawei

Huawei OptiX PTN Series User manual

Huawei

Huawei Quidway AR 46 Series User manual

Huawei

Huawei E5785-320a User manual

Huawei

Huawei EchoLife BM625 WiMAX CPE User manual

Huawei

Huawei V200R001C01 Operating instructions

Huawei

Huawei eSpace IAD101H User manual

Huawei

Huawei HW01 User manual

Huawei

Huawei HG552f User manual

Huawei

Huawei Quidway R2600 Series User manual

Huawei

Huawei E586BS-6 User manual

Huawei

Huawei AR2200 Series User manual

Huawei

Huawei B593s-931 Technical specifications

Huawei

Huawei E173 User manual

Huawei

Huawei EG8143A5 User manual

Huawei

Huawei S6700 Series User manual

Huawei

Huawei HG8010 series User manual

Huawei

Huawei NE20E-S2E Quick guide

Huawei

Huawei HG531s User manual

Huawei

Huawei OptiXstar HG8140H5 User manual

Huawei

Huawei EchoLife EG8245H5 User manual

Huawei

Huawei 31010GAS User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview