Huawei B310s User manual
1
B310s LTE CPE
Quick Start
2
Getting to know your Router B310s
Power indicator
On: the B310s is switched on.
Off: the B310s is switched off.
Network mode
indicator
Steady cyan: connected to an LTE network.
Steady green: connected to an Ethernet
network.
Steady red:
– The SIM card is not recognised, the PIN has
not been entered, or the PIN verification has
failed.
– Failed to connect to a mobile network or an
Ethernet network.
Wi-Fi/WPS
indicator
Steady on: Wi-Fi turned on.
Blinking: a WPS connection is being setup.
Off: Wi-Fi turned off.
3
LAN/WAN
indicator
Steady on: LAN/WAN port connected to a LAN
device or an Ethernet port.
Blinking: data is being transmitted through the
LAN/WAN port.
Off: LAN/WAN port not connected to a LAN
device or an Ethernet port.
Signal strength
indicator
On: signal reception available (3 Bars
recommended for better reception).
Off: no reception.
SIM card slot Install a standard SIM card to access internet via
an LTE data connection.
External
antenna port Connect to an external antenna after the removal
of cover.
WPS button Press and hold for 2 or more seconds until
is blinking to activate WPS connection when Wi-Fi
is turned on.
Power button Press and hold for about 3 seconds to power the
B310s on or off.
Reset button
Restoring the default settings of the B310s will
erase all previous settings.
When the B310s is powered on, use a sharply
pointed object to press and hold for about 3
seconds until indicator is blinking to restore
the B310s to its factory settings. After the factory
defaults are restored, the B310s will restart
automatically.
Power port Connect to a compatible power adapter.
LAN/WAN port
Working as a LAN port when connected to a
computer, switch to any other LAN device.
Working as a WAN port when connected to an
Ethernet port.
Telephone port Connect to a telephone.
4
1 Installation
Scenario 1: Accessing the Internet using an LTE
network
Step 1: Installing the SIM card
1. Slide off the card slot cover.
2. Insert the SIM card into the card slot. Ensure that the slanted edge of the SIM
card aligns with that of the card slot
3. Close the card slot cover.
Do not remove the SIM card when it is in use. Doing so, will affect the
performance of your router B310s.
5
Step 2: Connecting cables
Once connected to a power outlet, press the power button as the Router B310s
requires to be powered on manually
Power adapter Computer
Telephone Laptop, Tablet or Smartphone
To prevent interference caused by radio signals, place the B310s at least 1
meter (3.28 feet) away from telephone and other electrical devices.
The B310s power adapter model is HW-120100XYW. X and Y represent
letters or numbers that vary by region. For details about the specific adapter
model, contact an authorised dealer.
Do not connect the B310s to the telephone wall outlet (or any Public Switched
Telephone Network), because doing so could damage the B310s due to
excessive heat.
6
Installing the external antenna
In areas with poor reception, connect external antenna to the Router B310s
external antenna port to improve signal reception.
1. Power off the B310s and disconnect it from the power outlet.
2. Remove the cover from the antenna port. (Keep it in a safe place.)
3. Install one or two external antennas as needed. Make sure the external
antennas are securely connected to the antenna ports.
If you are using only one external antenna, connect it to port 1.
Before installing the external antenna, ensure that the B310s is switched off
and disconnected from the power outlet.
Only use the external antenna indoors, and do not use it during a
thunderstorm.
Do not change another unexpected antenna unless it is provided by the
manufacturer -
7
Scenario 2: Accessing the internet via multiple
devices
Connect the B310s to an Ethernet port or an ADSL modem for internet access.
Once connected to a power outlet, the B310s automatically powers on.
Power adapter Ethernet port
Telephone Laptop, Tablet, or Smartphone
To prevent interference caused by radio signals, place the B310s at least 1
meter (3.28 feet) away from telephone and other electrical devices.
The B310s power adapter model is HW-120100XYW. X and Y represent
letters or numbers that vary by region. For details about the specific adapter
model, contact an authorised dealer.
Do not connect the B310s to the telephone wall outlet (or any Public Switched
Telephone Network), because doing so could damage the B310s due to
excessive heat.
8
2 Setting up a Wi-Fi connection
Step 1: Enabling Wi-Fi on the B310s
When the indicator is steady on, the Wi-Fi function of the B310s is turned
on.
Step 2: Recording the SSID and Wi-Fi key
The default SSID and Wi-Fi key are printed on the B310s bottom label.
Step 3: Setting up a Wi-Fi connection on your device (computer,
tablet, or smartphone) -
Method 1: Setting up a Wi-Fi connection manually
1. From your Wi-Fi enabled device - scan for wireless networks in your area.
2. Connect to the network name that matches the SSID found on the device label.
Make sure your device (Computer, Tablet, or Smartphone) also supports Wi-Fi.
For details about how to manually enable or disable the Wi-Fi function, refer to
the WLAN settings section of the help information on the web management page.
To prevent unauthorised parties from accessing your Wi-Fi network, it is
recommended that you change the SSID and Wi-Fi key from time to time. For
details, see the help information on the web management page.
9
3. When prompted for password, enter the Wi-Fi Key found on the device label.
(The Wi-Fi key is case sensitive.) Your device will notify you when it is
connected.
Method 2: Reset Wi-Fi connection through WPS
If the device supports WPS, you can set up a WPS connection as follows:
1. Ensure that Wi-Fi is enabled on the device.
2. Press and hold the WPS button for 2 or more seconds. The indicator
then starts blinking.
3. Activate the WPS connection on the device in 2 minutes.
For instructions about how to enable a WPS connection on the client, see the
device - user guide.
10
3 Configuring your B310s
1. After the device is connected to the B310s through Wi-Fi or LAN port, launch a
browser on the client and visit http://192.168.8.1.
2. Enter the user name and password to log-in to the web management page.
The default user name and password are printed on the B310s bottom label.
3. Follow the quick setup wizard to check or set network connection parameters
step by step. For details, see the help information on the web management
page.
Once you are done, try opening a web page on the client to verify whether you
have Internet access.
To protect your account, change the password after your first log-in. For details
see the help information on the web management page.
If you modify the SSID and Wi-Fi key, you must set up the Wi-Fi connection on
the client again.
Table of contents
Other Huawei Network Router manuals
Huawei
Huawei EchoLife HG8247H Setup guide
Huawei
Huawei SmartAX MT800 User manual
Huawei
Huawei quidway s7700 User manual
Huawei
Huawei B535-333 User manual
Huawei
Huawei NE20E-S Series Guide
Huawei
Huawei B311-221 User manual
Huawei
Huawei AR1200 Series User manual
Huawei
Huawei HG530 User manual
Huawei
Huawei AR Series Operating manual
Huawei
Huawei AR530 Series User manual
Huawei
Huawei WiFi Q2 User manual
Huawei
Huawei Quidway S1700-8-AC User manual
Huawei
Huawei AR500 Owner's manual
Huawei
Huawei WS7200 User manual
Huawei
Huawei Quidway S9300 User manual
Huawei
Huawei 31010GEV User manual
Huawei
Huawei B818-260 User manual
Huawei
Huawei AR1200 Series Guide
Huawei
Huawei DN8245V-50 User manual
Huawei
Huawei E5180 User manual
