Huawei B310 LTE CPE User manual

B310 LTE CPE

Quick Start

31506955_01

1Getting to know your B310

Power indicator

On: the B310 is powered on.

Off: the B310 is powered off.

Network mode

indicator

Steady cyan: connected to an LTE network.

Steady blue: connected to a 3G network.

Steady yellow: connected to a 2G network.

Steady green: connected to an Ethernet network.

Steady red:

–The SIM card is not recognized, the PIN has not

been entered, or the PIN verification failed.

–Failed to connect to a mobile network or an

Ethernet network.

Wi-Fi/WPS

indicator

Steady on: Wi-Fi turned on.

Blinking: a WPS connection is being set up.

Off: Wi-Fi turned off.

LAN/WAN

indicator

Steady on: LAN/WAN port is connected to a LAN

device or an Ethernet port.

Blinking: data is being transmitted through the

LAN/WAN port.

Off: LAN/WAN port is not connected to a LAN

device or an Ethernet port.

Signal strength

indicator

On: signal reception available (more bars mean

better reception).

Off: no reception.

SIM card slot

Install a standard SIM card to access the Internet via

an LTE/3G/2G data connection.

External antenna

port

Connect to external antenna after remove the cover.

WPS button

Press and hold for 2 or more seconds until is

blinking to active WPS connection when Wi-Fi is

turned on.

Power button

Press and hold for about 3 seconds to power the B310

on or off.

Reset button

Restoring the default settings of the B310 will erase all

previous settings.

When the B310 is powered on, use a sharply pointed

object to press and hold for about 3 seconds until

indicator is blinking to restore the B310 to its

factory settings. After the factory defaults are

restored, the B310 will restart automatically.

Power port

Connect to compatible power adapter.

LAN/WAN port

Working as a LAN port when connected to a

computer, switch, or other LAN device.

Working as a WAN port when connected to an

Ethernet port on the wall.

Telephone port

Connect to a telephone.

2Installation

Scenario 1: Accessing the Internet using an LTE, 3G, or

2G network

Step 1: Installing the SIM card

1. Slide off the card slot cover.

2. Insert the SIM card into the card slot. Ensure that the beveled edge of the SIM card

aligns with that of the card slot.

3. Close the card slot cover.

Do not remove the SIM card when it is in use. Doing so will affect the performance of

your B310 and data stored on the SIM card may be lost.

Step 2: Connecting cables

Once connected to a power outlet, the B310 automatically powers on.

Power adapter

Computer

Telephone

Laptop, tablet, or smart phone

To prevent interference caused by radio signals, place the B310 at least 1 meter (3.28

feet) away from telephone and other electrical devices.

The B310's power adapter model is HW-120100XYW. X andY represent letters or

numbers that vary by region. For details about the specific adapter model, contact

an authorized dealer.

Do not connect the B310 to the telephone wall outlet (or any Public Switched Telephone

Network), because doing so could damage the B310 due to excessive heat.

Optional: Installing the external antenna

In areas with poor reception, connect external antenna to the B310's external antenna

port to improve signal reception.

1. Power off the B310 and disconnect it from the power outlet.

2. Remove the cover from the antenna port. (Keep it in a safe place.)

3. Screw external antenna fully into the antenna port.

4. Keep external antenna upward to get better signal.

The external antenna is an optional accessory, and may not included in the packaging

box. If required, please contact your local dealer to purchase it.

Before installing the external antenna, ensure that the B310 is powered off and

disconnected from the power outlet.

Only use the external antenna indoors, and do not use it during thunderstorm.

Do not change another unexpected antenna unless manufacturer provide.

To comply with FCC regulations limiting both RF output power and human exposure

to RF radiation, the maximum antenna gain including cable loss in exposure

condition must not exceed 3 dBi in PCS band, 4 dBi in AWS-1 band, 3 dBi in CELL

band, and 4 dBi in LTE band 7.

Scenario 2: Accessing the Internet using Ethernet

Connect the B310 to a wall-mounted Ethernet port or an ADSL modem for Internet

access.

Once connected to a power outlet, the B310 automatically powers on.

Power adapter

Ethernet port on the wall

Telephone

Laptop, tablet, or smart phone

To prevent interference caused by radio signals, place the B310 at least 1 meter (3.28

feet) away from telephone and other electrical devices.

The B310's power adapter model is HW-120100XYW. X andY represent letters or

numbers that vary by region. For details about the specific adapter model, contact

an authorized dealer.

Do not connect the B310 to the telephone wall outlet (or any Public Switched Telephone

Network), because doing so could damage the B310 due to excessive heat.

3Setting up a Wi-Fi connection

Step 1: Enabling Wi-Fi on the B310

When the indicator is steady on, the Wi-Fi function of the B310 is turned on.

Step 2: Recording the SSID and Wi-Fi key

The default SSID and Wi-Fi key are printed on the B310's bottom label.

Step 3: Setting up a Wi-Fi connection on your client

Method 1: Setting up a Wi-Fi connection manually

1. From your Wi-Fi enabled client, scan for wireless networks in your area.

2. Connect to the network name that matches the SSID found on the device label.

3. When prompted for password, enter the Wi-Fi Key found on the device label. (The

Wi-Fi key is case sensitive.) Your client will notify you when it is connected.

Make sure your client (computer, tablet, or smart phone) also supports Wi-Fi.

For details about how to manually enable or disable the Wi-Fi function, refer to the

WLAN settings section of the help information on the web management page.

To prevent unauthorized parties from accessing your Wi-Fi network, it is recommended

that you change the SSID and Wi-Fi key from time to time. For details, see the help

information on the web management page.

Other manuals for B310 LTE CPE

Table of contents

Other Huawei Network Router manuals

Huawei

Huawei K562e User manual

Huawei

Huawei Quidway S8500 Series User manual

Huawei

Huawei B683-74V User manual

Huawei

Huawei SmartAX MT800 User manual

Huawei

Huawei B2368 User manual

Huawei

Huawei E5180 User manual

Huawei

Huawei E586BS-6 User manual

Huawei

Huawei EG8143A5 User manual

Huawei

Huawei E5 User manual

Huawei

Huawei S6700 Series Guide

Huawei

Huawei AR2200 Series User manual

Huawei

Huawei NE20E-S Series Guide

Huawei

Huawei OptiX PTN Series User manual

Huawei

Huawei M200 Technical specifications

Huawei

Huawei AR1200 Series Guide

Huawei

Huawei B593s-22 User manual

Huawei

Huawei LTE CPE E5172 Manual

Huawei

Huawei EchoLife EG8145V5 User manual

Huawei

Huawei AR1200 Series User manual

Huawei

Huawei B681-54 User manual

Huawei

Huawei OptiXstar EG8010Hv6-10 User manual

Huawei

Huawei NE20E-S2E Quick guide

Huawei

Huawei B593 Specification sheet

Huawei

Huawei B593s-931 Technical specifications

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview