Huawei ESpace EGW1520A User manual

eSpace EGW1520 Enterpr

eSpace

EGW1520

Enterpr

V100R001C01

Quick Start

eSpace EGW1520 企业网

关

V100R001C01

快速入门

HUAWEI TECHNOLOGIES CO., LTD.

Issue:04

Part Number:31505357

Date:2012-10-25

文档版本：04

文档编号：31505357

发布日期：2012-10-25

rise Gateway

rise

Gateway

关

Welcome

Welcome to eSpace EGW1520 Enterprise

describes how to install and configure the

refer to the eSpace EGW1520 Enterprise

in the CD-ROM delivered with the device.

Usage Notice

zKeep the power plugs clean and dry to a

zUse the power supply adapter provided

zKeep your hands dry when plugging in o

Packing List

zPower off the device, remove all connec

maintenance personnel if smokes, noise

EGW1520 Power supply adapter

Device Appearance

Rear View

Quick Start

Document CD-ROM

Side View

ateway (EGW1520). This document

GW1520. For more information, please

ateway Product Documentation provided

void electric shock and other potential risks.

ith this product.

ut the device cable.

ed cables, and contact authorized

, or odors come from the device.

Network cable (1)

Analog phone lines (3)

Warranty Card

ESET: Press the button for short time (≤6s) to

start. Press the button for long time (> 6s) to

store factory settings.

LAN: Press the button for short time (≤6s) to

able or disable WLAN. Press the button for long

e (> 6s) to activate WPS.

Installation

1 Preparing Installation Tools

Install the EGW1520 on a horizontal surfac

I t lli th EGW1520 h i t l

2 Installing the EGW1520

Phillips screwdriver Claw hammer

lli

EGW1520

on a

zon

on the surface and leave 10 cm space a

zTo install the EGW1520 on a wall, fix th

of the swell fixtures is exposed for moun

3 Connecting Cables

Phone line port

3G dat

After cables are connected, press the powe

the POWER indicators (on the front panel)

the POWER indicator is steady, the EGW1

Analog phone

IP ph

Note: Either the ADSL or WAN port can

be used. The FXO1/LINE port supports

power-off survival, and you are advised

to use it with preference.

or on a wall.

fi Y l dtlit

Hammer drill Level ruler

ace

s easy.

ou on

y nee

o p

ace

ound for heat dissipation.

swell fixtures (M4) and ensure that 5 mm

ing the EGW1520.

Network cable

Phone line

Power supply socket

Network cable port

card

r button to power on the EGW1520. View

nd check the EGW1520 working status. If

20 is working properly.

FAX

Analog phone

IAD

Configuring the EGW1520

Scenario Description

The audio function of the EGW1520 is used

independent IP PBX, IMS/NGN access gat

UC solution. The following describes the co

details about scenario description and confi

The EGW1520 supports Internet access thr

methods are available: account and passw

Internet access mode and data, contact yo

ROM delivered with devices.

in one of the following scenarios:

way, and local gateway in a branch in the

figuration methods in these scenarios. For

uration cases, see the documentation CD-

ugh ADSL or WAN. In WAN mode, three

rd, static IP, and DHCP. For the specific

r local network carrier.

Planning Network Access Informati

Item Parameter

WAN

Account

PPPoE user name

PPPoE password

Static IP

WAN IP address

WAN subnet mask

Starting Configuration ——Netw

Static

WAN gateway IP address

Primary DNS server

DHCP

ADSL

PVC Identifier (VPI)

PVC Identifier (VCI)

PPPoE user name

PPPoE password

Wireless

SSID

Wireless

function

Wireless access password

Starting Configuration

bLogging In to the Web Managemen

Connect a PC to a LAN port on the EG

default URL is https://192.168.1.1.

Enter the user name (default: admin) an

Starting

Configuration

Choose Quick Setup from the navigatio

Choose a country and click Next.

Select a network connection mode acco

and click Next. Verify parameter settings

Click Save And Continue and configure

does not need to be configured, click Sa

Planning Description

rking

ADSL and WAN are available.

The WAN modes include the account, static

IP, and DHCP submodes.

To obtain the network access mode and

data, contact the local network carrier.

Indicates the ID of the EGW1520. The ID is

displayed on a Wi-Fi terminal after the

terminal finds the EGW1520. The default ID

is eSpace EGW_****. **** is the last four

di it i th WLAN MAC dd

WLAN

MAC

ress.

The password is a string consisting of 8 to

63 ASCII characters or 64 hexadecimal

digits. The default password is the WLAN

MAC address of the EGW1520.

System

1520 using a network cable.

plorer 6.0 or a later version on the PC. The

password (default: Admin@123) and click

tree on the web management system.

ding to step , set relevant parameters,

the audio function. If the audio function

e And Exit to exit the configuration wizard.

Starting Configuration —— Inde

aPlanning Users' Internal Numbers

Analog phones, fax machines, IP phones, a

EGW1520. You are advised to connect fax

PHONE port.

When the EGW1520 functions as an indepe

prefix plus the called number to make an ou

the FXO port.

The default outgoing prefix is 888. The outg

called number change rule in outgoing calls.

An internal number is a string of 1 to 30 digit

Phone Type

Fax machine or analog phone

IP phone

Analog phone 1 (connected to the

EGW1520 through the IAD)

Analog phone 2 (connected to the

EGW1520 through the IAD)

...

internal

number

string

digit

Starting Configuration

Configure the IAD. The following describ

1. Open Internet Explorer and enter the

the address box.

Et th (df lt

)

n the

erve

page, disable the U

Click Next to access the analog phone c

not need to be configured when the EG

Based on the data plan in step , config

leave the registration groups and extern

Click Add in the right part of the IP Phon

, configure internal numbers of SIP users

external numbers blank, and click Next.

Click Finish to finish EGW1520 configur

e user name

: roo

)

3. Choose Basic Configuration > Net

mode. Set the IAD IP address to 192.

port on the EGW1520: 192.168.1.1),

and set the IP address of the default

4. Choose SIP Service Configuration

SIP server to the IP address of the L

192.168.1.1).

5. Choose SIP Service Configuration

user numbers) based on the data pla

endent IP PBX

d IADs can be connected to the

achines to the EGW1520 through the

ndent IP PBX, users can dial the outgoing

going call, and the call is routed through

ing prefix is deleted according to the

User Type Internal Number Example

POTS user 6001

SIP user 6002

SIP user 6003

SIP user 6004

... ...

s how to configure IAD208E(M).

IAD IP address (default: 192.168.100.1) in

dd(dflt

)dlik

mode and click Next.

nfiguration page. Registration groups do

1520 functions as the IP PBX.

ure internal numbers of POTS users,

l numbers blank, and click Next.

epage. Based on the data plan in step

, leave the registration groups and

tion.

passwor

: a

)

nt page.

ork Paramete

and select the static IP

68.1.x(default IP address of the LAN

et the subnet mask to 255.255.255.0,

ateway to 192.168.1.1.

SIP Server and set the IP address of the

N port on the EGW1520 (for example,

FXS User and set User ID (indicating

in step .

Configure an IP phone. The following de

phone. For details about other models, s

1. Enter the IP address of the IP phone

can click OK on the IP phone to view

2. Enter the user name and password (

and click Log In to access the web m

3. Click the Account tab. Set Register

based on the data plan in step . S

address of the LAN port on the EGW

4. Click Submit to finish IP phone confi

You can choose

Voice > Phone Alloc

You

can

choose

Voice

Phone

Alloc

system of the EGW1520 to view the

Verify the configuration according to the

document.

Starting Configuration —— IMS/

aPlanning SIP Server Data

Item Description

Type of the SIP server

address

The address can be an IP

from the network carrier.

SIP server address IP address or domain na

network carrier. For exam

SIP ser er t pe

The options are

NGN

and

SIP

ser

The

options

are

NGN

and

Heartbeat detection

interval

Interval for the EGW1520

in seconds. The value ran

recommended.

Registration interval

Interval for the registratio

this group to the SIP serv

The value ranges from 0 t

Assume that the EGW1520 connects to the

user-by-user registration.

To obtain the registration group type, trun

user name, IMS domain name, external n

contact the network carrier. When the SIP s

Planning the Registration Group

name blank.

Registration

Group ID Registration

Group Type Trunk Registrati

User ID

0User-by-user

registration +8657187654321

1User-by-user

registration +8657187654322

2User-by-user

registration +8657187654323

... ... ...

cribes how to configure an eSpace 78xx IP

e the appropriate administrator guide.

n the address box of Internet Explore

(You

the IP address of the IP phone).

efault values: admin) of the administrator

anagement page.

ame to the user number of the IP phone

t SIP Server to 192.168.1.1 (default IP

520).

uration.

cation > IP Phone

in the web management

cation

Phone

the

web

management

egistration status of the IP phone.

hapter Verifying Configuration in this

GN Access Gateway

address and or a domain name. Obtain the type

e of the SIP server. Obtain the address from the

le, the value can be 191.1.1.1 or m04.huawei.com.

IMS

Obtain the t pe from the net ork carrier

IMS

Obtain

the

from

the

net

ork

carrier

to send heartbeat messages to the active SIP server,

es from 10 to 900. The default value 60 is

group to send registration messages for users in

r, in seconds.

14400. The default value 360 is recommended.

IMS, and the registration group type is

k registration user ID, trunk registration

mbers,Authentication and Password,

rver t

e is NGN

leave the IMS domain

yp ,

n Trunk Registration

User Name IMS Domain

Name

+8657187654321@abc.

def.com abc.def.com

+8657187654322@abc.

def.com abc.def.com

+8657187654323@abc.

def.com abc.def.com

... ...

Planning User Numbers

Analog phones, fax machines, IP phones, a

EGW1520. You are advised to connect fax

PHONE port.

zThe ID of the registration group correspo

the same as that of the the trunk registration

with +, you need to change + to 00 when yo

zInternal numbers can be customized.

NOTE

User User Type

Exa

Fax machine or analog phone POTS user 6001

IP phone SIP user 6002

Analog phone 1 (connected to the

EGW1520 through the IAD) SIP user 6003

Analog phone 2 (connected to the

EGW1520 through the IAD) SIP user 6004

... ... ...

On the

SIP

erver

page disable the UC

Starting Configuration

the

SIP

erver

page

disable

the

server based on the data plan in step

Configure the registration group based o

Configure the POTS user's internal and

in step and click Next.

Click Add in the right part of the IP Phon

and external numbers based on the data

Click Finish to finish EGW1520 configur

6Configure the IAD. The following describ

1. Open Internet Explorer and enter the

the address box.

2. Enter the user name (default: root) a

3. Choose Basic Configuration > Net

mode Set the IAD IP address to

192

mode

Set

the

IAD

address

192

port on the EGW1520: 192.168.1.1),

and set the IP address of the default

4. Choose SIP Service Configuration

SIP server to the IP address of the L

192.168.1.1).

5. Choose SIP Service Configuration

user numbers) based on the data pla

Configure an IP phone. The following de

phone.

1. Enter the IP address of the IP phone i

can click OK on the IP phone to view

d IADs can be connected to the

achines to the EGW1520 through the

lN b

Ritti

Et lN b

ding to an external number of a user must be

ser ID. If the trunk registration user ID starts

configure an external number.

ple

Group ID

erna

Example

0 008657187654321

1 008657187654322

2 008657187654323

3 008657187654324

... ...

mode and click

Add

Configure the SIP

mode

and

click

Add

Configure

the

SIP

and click Next.

the data plan in step and click Next.

xternal numbers based on the data plan

e page. Configure the SIP users' internal

plan in step and click Next.

tion.

s how to configure IAD208E(M).

IAD IP address (default: 192.168.100.1) in

d password (default: admin) and click

nt page.

ork Paramete

and select the static IP

168 1

(default IP address of the LAN

168

(default

address

the

LAN

et the subnet mask to 255.255.255.0,

ateway to 192.168.1.1.

SIP Server and set the IP address of the

N port on the EGW1520 (for example,

FXS User and set User ID (indicating

in step .

cribes how to configure an eSpace 78xx IP

n the address box of Internet Explore

(You

he IP address of the IP phone).

St ti C fi ti

8Verify the configuration according to the

document.

2. Enter the user name and password (

and click Log In to access the web m

3. Click the Account tab. Set Register

based on the data plan in step . S

address of the LAN port on the EGW

4. Click Submit to finish IP phone confi

You can choose

oice > Phone Allo

management system of the EGW152

phone.

Server Type Planned Item Remarks

gura

—

oca

Solution

aPlanning Server Information

When the EGW1520 functions as the local

SIP server on the central node at the head

synchronizes them to the EGW1520. You d

the EGW1520.

Before configuration, collect user quantity i

allocation to the enterprise IT administrator.

The default outgoing prefix of the EGW152

according to the called number change rule

Data

synchronization

server

IP address Contact the

address of th

Port number

Contact the

number of th

number fails

Key for data

synchronization

The EGW15

that of the d

same, the da

the EGW152

synchronizati

including digi

negotiate wit

format.

SIP server

address

The address

Obtain the a

SIP server

SIP server type

The options

enterprise IT

When the SI

Heartbeat

detection

interval

Interval for th

the active an

ranges from

recommende

Registration

interval

Interval for th

messages fo

seconds. Th

value 360 is

lG t i B hi th UC

hapter Verifying Configuration in this

efault values: admin) of the administrator

anagement page.

ame to the user number of the IP phone

t SIP Server to 192.168.1.1 (default IP

520).

uration.

ation > IP Phone in the web

to view the registration status of the IP

eway

n a

ranc

ateway in a branch in the UC solution, the

uarters allocates all user numbers and

not need to configure user numbers on

the branch and apply for number

is 888. The outgoing prefix is deleted

in outgoing calls.

nterprise IT administrator to obtain the IP

e data synchronization server.

nterprise IT administrator to obtain the port

data synchronization server. If the port

o be obtained, use the default value 8098.

0 compares its data synchronization key with

ta synchronization server. If the keys are the

ta synchronization server synchronizes data to

; otherwise, the EGW1520 rejects the data

on. The key is a string of 1 to 22 characters

ts, letters, or special characters. You can

the enterprise IT administrator about the key

can be an IP address and or a domain name.

dress from the enterprise IT administrator.

re IMS or NGN. Obtain the type from the

administrator.

server is eSpace U1960, select NGN.

server is eSpace U2900, select IMS.

e EGW1520 to send heartbeat messages to

standby SIP servers, in seconds. The value

0 to 150. The default value 90 is

e registration group to send registration

users in this group to the SIP server, in

value ranges from 0 to 14400. The default

ecommended.

On the SIP server page, enable the UC

server based on the data plan in step .

Click Add. Configure the SIP server bas

Click Finish.

You can choose Voice > Phone Allocat

EGW1520 to view the synchronized user

Starting Configuration

When configuring the IP phone, set SIP server 1, SIP

the central node, standby SIP server in the central no

NOTE

Verifying Configuration

You can visit a website (for example, http://

network function. If the access is successful

configured.

aVerifying Network Access

Verifying the Audio Function

Verify the configuration according to the

document.

zIndependent IP PBX

• Intra-office users dial each other's inte

numbers configured

numbers

configured

• An intra-office user under the EGW152

number (for example, mobile phone nu

• An outer-office user dials the number t

FXO port of the EGW1520. After heari

switchboard, the outer-office user dials

number).

zIMS/NGN access gateway

• Intra-office users dial each other's inte

numbers configured.

• Calls are made between an analog ph

network-side number (for example, a

Local gateway in a branch in the UC solu

Local

gateway

branch

the

solu

• Intra-office users dial each other's inte

numbers configured.

• An intra-office user under the EGW152

number (for example, mobile phone nu

• An outer-office user dials the number t

FXO port of the EGW1520. After heari

switchboard, the outer-office user dials

number).

In the preceding scenarios, verify that the c

fails, check the configuration and cable con

ode. Configure the data synchronization

d on the data plan in step and click Next.

on in the web management system of the

number.

server 2, and SIP server 3 to the active SIP server in

e, and IP address of the LAN port on the EGW1520.

nterprise.huawei.com) and verify the

the network function is correctly

hapter Verifying Configuration in this

nal numbers using phones that have

0 to dial the outgoing prefix (888) and the

mber) of an oute

-office user.

at the PSTN network carrier assigns to the

g the announcement played by the

the extension number (that is, the internal

nal numbers using phones that have

ne or IP phone under the EGW1520 and a

obile phone number).

ution

nal numbers using phones that have

0 to dial the outgoing prefix (888) and the

mber) of an oute

-office user.

at the PSTN network carrier assigns to the

g the announcement played by the

the extension number (that is, the internal

lls are connected successfully. If a call

ection.

This manual suits for next models

Table of contents

Other Huawei Gateway manuals

Huawei

Huawei DG8245V User manual

Huawei

Huawei eSpace IAD208E(M) User manual

Huawei

Huawei OptiXstar B650G-8E8P3W User manual

Huawei

Huawei EchoLife HG532 User manual

Huawei

Huawei EchoLife HG8245A Technical specifications

Huawei

Huawei HG659B User manual

Huawei

Huawei HG523 User manual

Huawei

Huawei HG659 User manual

Huawei

Huawei EchoLife HG510 User manual

Huawei

Huawei Sunrise Internet Box 5G User manual

Huawei

Huawei B260 User manual

Huawei

Huawei ME60 Series Instructions for use

Huawei

Huawei HG655a User manual

Huawei

Huawei HG532c User manual

Huawei

Huawei HG655b User manual

Huawei

Huawei HG523 User manual

Huawei

Huawei HG532t User manual

Huawei

Huawei HG532D User manual

Huawei

Huawei HG532c User manual

Huawei

Huawei B315s-608 User manual

Huawei

Huawei USG6305 Operator's manual

Huawei

Huawei H138-380 5G CPE Technical specifications

Huawei

Huawei ICE D-20 EC506 User manual

Huawei

Huawei EchoLife HG532 User manual

Popular Gateway manuals by other brands

LST

LST M500RFE-AS Specification sheet

Kinnex

Kinnex Media Gateway quick start guide

2N Telekomunikace

2N Telekomunikace 2N StarGate user manual

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Original instructions

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE user guide

Telsey

Telsey CPVA 500 - SIP Technical manual

RTA

RTA 460A-NNA4 Product user guide

Shaw

Shaw Gateway HDPVR user manual

ABB

ABB VSN900 Commissioning manual

Commander

Commander Pulse owner's manual

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E manual

NETGEAR

NETGEAR C6300BD installation guide

Amit

Amit CDW531AM user guide

HMS

HMS Netbiter EasyConnect EC150 user manual

AT&T

AT&T U-verse 3801 Replacement self-installation guide

Logic IO

Logic IO RTCU MX2 turbo Technical manual

Suttle

Suttle MediaMAX MXM-521 installation instructions

RTA

RTA 460MCBC-N2E Product user guide

Huawei eSpace EGW1520A User manual

Popular Gateway manuals by other brands