Huawei ESpace EGW1500E User manual

eSpace EGW1500E Enterprise Gateway

V100R001C06

Quick Start

Issue 03

Date 2011-12-20

HUAWEI TECHNOLOGIES CO., LTD.

Issue 03 (2011-12-20) Huawei Proprietary and Confidential

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and

the customer. All or part of the products, services and features described in this document may not be

within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,

information, and recommendations in this document are provided "AS IS" without warranties, guarantees or

representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: http://www.huawei.com

Email: [email protected]

eSpace EGW1500E Enterprise Gateway

Quick Start Contents

Issue 03 (2011-12-20) Huawei Proprietary and Confidential

Contents

1 Planning and Preparation............................................................................................................1

1.1 Safety Precautions............................................................................................................................................ 1

1.2 Checking the Installation Environment ............................................................................................................ 2

1.3 Unpacking Check............................................................................................................................................. 2

1.4 Customer Requirement Analysis and Network Planning ................................................................................. 3

2 Hardware Installation ..................................................................................................................5

2.1 Preparing Installation Tools.............................................................................................................................. 5

2.2 Installing EGW1500E ...................................................................................................................................... 5

2.3 Connecting Cables ........................................................................................................................................... 6

2.4 Powering On the EGW1500E .......................................................................................................................... 7

3 Product Function Configuration ................................................................................................8

3.1 Logging In to the Web Management System ................................................................................................... 8

3.2 Configuring Internet Access............................................................................................................................. 9

3.3 Configuring Voice Functions.......................................................................................................................... 12

4 FAQs ..............................................................................................................................................20

5 Qualification Card ......................................................................................................................22

6 Declaration on Hazardous Substances in Electronic Information Products ...................23

eSpace EGW1500E Enterprise Gateway

Quick Start 1 Planning and Preparation

Issue 03 (2011-12-20) Huawei Proprietary and Confidential

1 Planning and Preparation

1.1 Safety Precautions

For more information about safety precautions, see the eSpace EGW1500E Enterprise

Gateway Product Documentation.

Basic Requirements

zThe installation instructions provided should be followed.

zIn the event of a fault, contact the maintenance personnel. Do not open the device.

zAny company or person cannot change the design of the structure or security without

permission.

zThis device must be used in compliance with the legal and regulatory requirements of the

country in which it is being used. Please respect the legal rights of others when using this

device.

Usage Notice

zKeep the power plug clean and dry to avoid risk of electric shock and other potential

risk.

zUse the power supply adapter provided with this product.

zKeep your hands dry when plugging in or out the device cable.

zWhen the device is not in use, the power should be turned off and the mains power cable

should be disconnected from the mains supply.

zKeep water and other liquids away from the device. In the event of liquid coming into

contact with the device, disconnect from the power immediately. Remove all cables,

including network connections and power cables and contact your maintenance

personnel.

zIn the event of unusual behavior, such as smoke emitting from the device, unusual noises

or smells, disconnect from the mains power supply immediately, remove all the cables

connected to the device and contact an authorized maintenance personnel.

Cleaning Notice

zBefore cleaning, the device should be shut down and disconnected from the mains power

supply, removing all power and network cables.

zClean using a soft, dry cloth. Do not use liquid or aerosol cleaners on this device.

eSpace EGW1500E Enterprise Gateway

Quick Start 1 Planning and Preparation

Issue 03 (2011-12-20) Huawei Proprietary and Confidential

1.2 Checking the Installation Environment

Before installation, check the installation environment.

Table 1-1 lists the major check items in the installation environment.

Table 1-1 Major check items in the installation environment

Item Requirement

Damppr

oof

Working humidity: 5%–95% relative humidity (RH), no condensing. The

dehumidifier devices such as air conditioners with the dehumidifier function and

special dehumidifiers must be installed in the equipment room where the

relative humidity is higher than 95%. Water seepage, dripping, and dew

producing are forbidden in the room.

Dustpro

If the equipment room is close to a dust source, such as a coal mine, a country

road or a farmland, install aluminum alloy windows and fireproofing doors.

Lightpr

oof

Place the device in an environment without direct and strong sunlight.

Interven

tion-pro

Prevent the device from other RF devices within 50 meters. Place the device at

the center of the working area by considering the WLAN coverage range. Install

the antennas vertically to get the best WLAN performance.

power

In the equipment room, a stable AC power supply that meets the power

requirements of the equipment must be available.

Heat

dissipati

Place the device in an environment with good ventilation and without heat

sources. Leave more than 10 cm space for heat dissipation at the top and all four

sides of the device.

1.3 Unpacking Check

You need to check the received equipment according to the packing list and check whether all

the materials (such as hosts, cables, and CD-ROMs) are complete and undamaged.If any

material is damaged or lost, contact the local merchant.

Table 1-2 Packing list

Item Quantity Remarks

eSpace EGW1500E including

antennas

1 -

Power supply adapter 1 -

Straight-through network cable 1 A straight-through network cable is 2

meters long.

Swell fixtures 2 Swell fixtures are used to install the

EGW1500E on the wall.

eSpace EGW1500E Enterprise Gateway

Quick Start 1 Planning and Preparation

Issue 03 (2011-12-20) Huawei Proprietary and Confidential

Item Quantity Remarks

Document and CD-ROM 1 Product document and open source code

notice.

eSpace EGW1500E Enterprise

Gateway Quick Start

1 Containing the product certificate and the

Declaration on Hazardous Substances in

Electronic Information Products.

1.4 Customer Requirement Analysis and Network

Planning

This topic describes the customer requirements that you need to obtain and the typical

networking.

Collecting Customer Requirements

You need to obtain customer requirements as listed in Table 1-3 before installing and

configuring the device.

Table 1-3 Customer requirements

Item Description

Internet access Determine the access mode (ADSL or WAN) and whether the

customer requires 3G network backup.

Number of POTS users Determine the number of POTS phones.

Number of SIP users Determine the number of IP phones and soft terminals.

Internal number Learn about the customer's requirements on internal numbers.

FXO ports The EGW1500E connects to the PSTN network by means of

FXO ports. It supports FXO-based switchboard and dedicated

line functions.

... ...

Network Planning

Figure 1-1 shows the typical networking of the EGW1500E.

eSpace EGW1500E Enterprise Gateway

Quick Start 1 Planning and Preparation

Issue 03 (2011-12-20) Huawei Proprietary and Confidential

Figure 1-1 Typical networking

eSpace EGW1500E Enterprise Gateway

Quick Start 2 Hardware Installation

Issue 03 (2011-12-20) Huawei Proprietary and Confidential

2 Hardware Installation

2.1 Preparing Installation Tools

This topic describes the tools for installing the EGW1500E on the wall. If you want to install

the EGW1500E on a horizontal surface, place it on the surface.

Table 2-1 Installation tools

Phillips screwdriver

Claw hammer

Hammer drill

Level ruler

2.2 Installing EGW1500E

Install an EGW1500E on a horizontal surface or on the wall.

Installing EGW1500E on a horizontal surface is easy. You only need to place it on the surface

and leave 10 cm space around for heat dissipation.

To install an EGW1500E on the wall, fix the swell fixtures and ensure that 5 mm of the swell

fixtures is exposed for mounting the EGW1500E, as shown in Figure 2-1.

eSpace EGW1500E Enterprise Gateway

Quick Start 2 Hardware Installation

Issue 03 (2011-12-20) Huawei Proprietary and Confidential

Figure 2-1 Mounting an EGW1500E on the wall

2.3 Connecting Cables

This topic describes how to connect cables for the EGW1500E.

Select a cable connection mode based on the site requirements. Figure 2-2 and Figure 2-3

show the cable connection modes.

Figure 2-2 ADSL access

The ADSL splitter separates voice and data signals. You can connect the splitter to ADSL and FXO ports

of the EGW1500E or connect ADSL ports on user devices to the ADSL port of the EGW1500E.

eSpace EGW1500E Enterprise Gateway

Quick Start 2 Hardware Installation

Issue 03 (2011-12-20) Huawei Proprietary and Confidential

Figure 2-3 Broadband access

zThe EGW1500E provides eight LAN interfaces, which can connect to terminals such as computers

and IP phones. To use more than eight LAN interfaces, connect the EGW1500E to an Ethernet

switch or hub.

zThe EGW1500E provides four POTS interfaces (PHONE1 to PHONE4), which can connect to

common phones or fax machines. To use more than four POTS interfaces, connect the EGW1500E

to an IAD.

2.4 Powering On the EGW1500E

After cables are connected, press the power button to power on the EGW1500E. View the

power supply indicators and verify that the EGW1500E is working properly. Before pressing

the power button, ensure that all cables are connected correctly to the ports.

Figure 2-4 shows the location of the power button. If the POWER indicator is on, the

EGW1500E works properly.

Figure 2-4 Power button

Table of contents

Other Huawei Gateway manuals

Popular Gateway manuals by other brands

LST

LST M500RFE-AS Specification sheet

Kinnex

Kinnex Media Gateway quick start guide

2N Telekomunikace

2N Telekomunikace 2N StarGate user manual

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Original instructions

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE user guide

Telsey

Telsey CPVA 500 - SIP Technical manual

RTA

RTA 460A-NNA4 Product user guide

Shaw

Shaw Gateway HDPVR user manual

ABB

ABB VSN900 Commissioning manual

Commander

Commander Pulse owner's manual

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E manual

NETGEAR

NETGEAR C6300BD installation guide

Amit

Amit CDW531AM user guide

HMS

HMS Netbiter EasyConnect EC150 user manual

AT&T

AT&T U-verse 3801 Replacement self-installation guide

Logic IO

Logic IO RTCU MX2 turbo Technical manual

Suttle

Suttle MediaMAX MXM-521 installation instructions

RTA

RTA 460MCBC-N2E Product user guide

Huawei eSpace EGW1500E User manual

Popular Gateway manuals by other brands