Huawei HG659 User manual

Quickstart Guide

Origin Home Gateway

Your Origin Home Gateway

What do all the

lights, buttons

and ports mean?

Please wait until you have

received an SMS or email

advising that your Origin

broadband service is active.

Once you have received this

follow our step-by-step guide.

Oﬀ Steady green Blinking green

Power The power is

switched oﬀ

Your gateway

is powered on -

WAN -

Your gateway

is synced to

nbn™ or ADSL

Your gateway

is syncing to

nbn™ or ADSL

Internet

Your gateway is

not connected

to the internet

Your gateway is

connected to the

Internet

Data is being

transmitted

WLAN WiFi is oﬀ WiFi is enabled WiFi data is being

transmitted

VolP No Origin Home

Phone connected

Your Origin Home

Phone service is

connected

Your Origin Home

Phone service is in

use

LAN1-LAN4 No device connected

to the LAN port

The LAN port has

a device connected

Data is being

transmitted

HUAWEI TECHNOLOGIES CO., LTD.

MAC: XXXXXXXXXX

S/N: XXXXXXXXXXXXXXXXXXXX XXXX

WLAN Key: XXXXXXXX

SSID(5G): HUAWEI-XXXXXX-5G

SSID: HUAWEI-XXXXXX

MADE IN CHINA

What’s on the back?

All the important connection

ports and details are on the back

of your Origin Home Gateway.

Power

DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB

Reset

Power connection

The power adaptor

connects here

Voice port

For your Origin Home

Phone service

Power button

Turn the gateway on

or oﬀ

WAN Port

Blue port for

some nbn™

connection

types

WLAN

Turn your

WiFi on

or oﬀ

LAN ports

Yellow ports to

connect your

Ethernet devices

Factory reset

Hold the button for 10

seconds to perform a

factory reset

nbn™

DSL

Phone

Line

nbn™

DSL

Phone

Line

nbn™

DSL

Phone

Line

nbn™

DSL

Phone

Line

nbn™

DSL

Phone

Line

nbn™

DSL

Phone

Line

nbn™

DSL

Phone

Line

nbn™

DSL

Phone

Line

nbn™

DSL

Phone

Line

nbn™

DSL

Phone

Line

DSL port

For ADSL or

some nbn™

connection

types

Gateway Information

Serial number and

other information about

your gateway

WPS

WiFi

protected

setup

Power

DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB

Reset

HUAWEI TECHNOLOGIES CO., LTD.

MAC: XXXXXXXXXX

S/N: XXXXXXXXXXXXXXXXXXXX XXXX

WLAN Key: XXXXXXXX

SSID(5G): HUAWEI-XXXXXX-5G

SSID: HUAWEI-XXXXXX

MADE IN CHINA

Set up your nbn™

Broadband connection

Connect one end of the power adaptor to

your Origin Home Gateway and the other

end into a power point and switch it on.

Ready to get online?

Start by powering

up your new Origin

Home Gateway.

If you have an ADSL connection

then go to step 3.

If nbn™ has installed a device at your

premises:

• Check the nbn™ connection box is

powered on.

• Take the yellow Ethernet cable and

plug one end into the blue WAN port

of your Origin Home Gateway and the

other end into the UNI-D port on your

nbn™ connection box.

nbn™

DSL

Phone

Line

Power

DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB

Reset

Power

DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB

Reset

Power

DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB

Reset

Power

DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB

Reset

nbn™

DSL

Phone

Line

If nbn™ has not supplied any equipment:

• Connect one end of the grey

telephone cable directly into your

telephone wall socket, and the other

end into the grey DSL port on your

Origin Home Gateway.

Telephone

wall socket

nbn™

UNI-D port

Set up your ADSL

Broadband connection

Powering on your

Origin Home Gateway

3 4

Power

DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB

Reset

nbn™

DSL

Phone

Line

Power

Reset

On/Oﬀ

Power

DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB

Reset

Power

DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB

Reset

Switch on the Origin Home Gateway by

pressing the power button on the side.

Your gateway will now automatically

setup - there is no need for you to

conﬁgure anything. This process can take

up to 20 minutes to complete, so please

be patient.

The Internet light will turn solid green

once the setup is complete.

When your Origin Broadband service is in

use the Internet light will ﬂash green.

If you have an nbn™ connection

then go to step 4.

Connect one end of the grey telephone

cable directly into your telephone wall

socket, and the other end into the grey

DSL port on your Origin Home Gateway.

If you have an existing home phone you

will need to install an ADSL ﬁlter (available

from any computer store) to ensure your

service works correctly. Please note this is

only for ADSL connections.

Telephone

wall socket

Home

phone

Telephone

wall socket

nbn™

DSL

Phone

Line

Connect one end of the grey telephone

cable into the DSL port of the ADSL ﬁlter

and the other end into the DSL port of

your Origin Home Gateway. Connect

the other grey telephone cable into the

Line port of the ﬁlter and the other end

into your telephone wall socket. Finally,

connect your existing home phone cable

into the Phone port of the ﬁlter.

ADSL

ﬁlter

Having trouble connecting?

Read our troubleshooting tips after

step 8 if the Internet light does not

turn green.

Set up your Origin

Home Phone service

Connecting

via WiFi

5 6

Power

DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB

Reset

Power

DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB

Reset

We recommend that you use the

faster 5GHz network.

Your 2.4 GHz network (the non-5G SSID)

has slower speeds but greater range.

If you are experiencing issues in some

areas of your house, or are using an older

device that can only see this network, try

using this one.

Skip this step if you didn’t order

an Origin Home Phone service.

Connect one end of your grey telephone

cable into the grey Phone1 port on your

Origin Home Gateway and the other end

into your telephone handset.

Porting your existing phone number to

Origin?

If you’ve asked us to port your existing

phone number to an Origin Home Phone

service, please allow up to 10 days

after your nbn™ service is active for this

porting process to complete. We’ll send

you an email to conﬁrm when it is ready

to use.

Home

phone

nbn™

DSL

Phone

Line

Your unique WiFi network name (SSID)

and WiFi password will be sent to you

via email and SMS when your service is

active.

1. Make sure that WiFi is enabled on your

computer, tablet, smartphone or other

WiFi device.

2. View the list of available WiFi networks

on your device.

3. Select the network shown in your email

or SMS. It will look similar to:

XXX-XXXXXX-ORIGIN5GHZ or

XXX-XXXXXX-ORIGIN

The X’s will be unique to your Gateway.

4. Enter the WiFi password exactly as

shown in the email or SMS sent to you.

Connecting

via Ethernet

Congratulations, you’re now connected!

What are you waiting for? Start surﬁng.

Troubleshooting tips

If you are unable to successfully connect

to your Origin Home Gateway via WiFi

or directly via an Ethernet cable, follow

these steps that may help you get back

up and running.

• Power oﬀ your Origin Home Gateway

and any attached equipment.

• Check that your Origin Home Gateway

has been plugged in correctly.

• If you have an nbn™ connection box,

check that it is switched on.

• Double check you have followed the

correct cabling instructions for your

nbn™ or ADSL connection - it is really

important to ensure the cables are

plugged into the correct ports.

• After 2 minutes, power on your Origin

Home Gateway by pressing the power

button on the side.

• The automated setup and connection

process can take up to 20 minutes to

complete - the Internet light will turn

solid green when it has successfully

connected.

• If you are connecting your device via

WiFi, try ‘forgetting’ the connection

and following step 6 again.

• If you are still experiencing connection

issues please contact us.

nbn™

DSL

Phone

Line

Power

DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB

Reset

LAN4 LAN3 LAN2 LAN1 WAN USB

You can connect up to 4 devices directly

to the Origin Home Gateway via Ethernet

cables.

Your

device

You are now

connected!

Connect devices (such as your desktop

comptuer) via an Ethernet cable to any of

the yellow LAN ports on the back of the

Origin Home Gateway and connect the

other end into the Ethernet port on your

device.

Box contents: Need help? Contact us.

originbroadband.com.au

[email protected]

1300 508 830

• Origin Home Gateway

• Power Adaptor

• Yellow Ethernet Cable

• 2 x Grey Telephone Cables

• Quickstart Guide

Box contents:

Other manuals for HG659

Table of contents

Other Huawei Gateway manuals

Popular Gateway manuals by other brands

LST

LST M500RFE-AS Specification sheet

Kinnex

Kinnex Media Gateway quick start guide

2N Telekomunikace

2N Telekomunikace 2N StarGate user manual

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Original instructions

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE user guide

Telsey

Telsey CPVA 500 - SIP Technical manual

RTA

RTA 460A-NNA4 Product user guide

Shaw

Shaw Gateway HDPVR user manual

ABB

ABB VSN900 Commissioning manual

Commander

Commander Pulse owner's manual

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E manual

NETGEAR

NETGEAR C6300BD installation guide

Amit

Amit CDW531AM user guide

HMS

HMS Netbiter EasyConnect EC150 user manual

AT&T

AT&T U-verse 3801 Replacement self-installation guide

Logic IO

Logic IO RTCU MX2 turbo Technical manual

Suttle

Suttle MediaMAX MXM-521 installation instructions

RTA

RTA 460MCBC-N2E Product user guide