Huawei C2008 User manual
HUAWEI C2008 CDMA 1X
Mobile Phone User Manual
ii
Copyright © 2007 Huawei Technologies Co., Ltd.
All Rights Reserved
No part of this manual may be reproduced or transmitted in any
form or by any means without prior written consent of Huawei
Technologies Co., Ltd.
Trademarks
and other Huawei trademarks are the trademarks or
registered trademarks of Huawei Technologies Co., Ltd. in the
People’s Republic of China and certain other countries.
All other trademarks mentioned in this manual are the property
of their respective holders.
Notice
The information in this manual is subject to change without
notice. Every effort has been made in the preparation of this
manual to ensure accuracy of the contents, but all statements,
information, and recommendations in this manual do not
constitute the warranty of any kind, express or implied.
i
Table of Contents
1 Getting to Know Your Phone .................................................1
2 Getting Started..........................................................................4
3 Voice Services...........................................................................6
4 Text Entry...................................................................................8
5 Message....................................................................................10
6 Phonebook...............................................................................11
7 Alarm Clock .............................................................................13
8 Security.....................................................................................14
9 Menu Options..........................................................................15
10 Warnings and Precautions.................................................23
1
1
Getting to Know Your Phone
Your Phone
Screen
Earpiece
End/Power
key
Left/Right soft key
Dial key
Navigation
keys Number keys
# key
* key
Charger/Headset
connector
OK key
2
Keys and Functions
Press
… To…
Make or answer a call.
In the standby mode, display the dialed calls.
Power on or off the phone.
End a call or reject an incoming call.
Return to the idle screen.
In the standby mode, enter UNI-INFO.
Confirm a selection of the menu.
Select the option displayed on the lower left corner
of the screen.
Select the option displayed on the lower right corner
of the screen.
|
Enter numbers and letters.
In the standby mode, press and hold key 1 to
display the voice mail.
In the standby mode, press and hold key 2–9 to
speed dial.
In any menu, select a menu item labeled with the
corresponding number.
3
Press
… To…
In the standby mode,
: Write a new message.
: Display the alarms.
: Display the inbox.
: Display the calendar.
During a call, press to adjust the earpiece
volume.
In the standby mode, press and hold it to switch
between the bell mode and etiquette mode.
In the standby mode, enter *, Por T.
In the English input mode, press and hold it to
switch between upper case and lower case.
In the text entry mode, press and hold it to display
the symbol list.
Provide different functions according to the phone
feature being used.
In the standby mode, when the phone lock is
enabled, press and hold it to lock the phone.
In the standby mode, enter #.
In the edit mode, switch between the input modes
or press and hold it to switch to the number input
mode.
Provide different functions according to the phone
feature being used.
4
Icons
Icon Meaning
Indicates the network signal strength.
The phone is out of the service area.
You have set the alarm clock.
The phone is set to vibration.
You have received a new message.
The phone is roaming.
Indicates the battery power level.
2
Getting Started
Powering On/Off the Phone
Press and hold to power on/off the phone.
Installing the Battery
Removing the Battery
If the phone is powered on, press and hold to power off
the phone first.
5
Installing/Removing the UIM Card
If the phone is powered on, press and hold to power off
the phone first and remove the battery. Then install/remove the
UIM card as shown in the following figure.
Charging the Battery
1. Connect the travel charger to the charger connector at the
bottom of your phone.
Make sure that the arrow on the charger connector faces the
front side of the phone.
2. Connect the charger to an AC power socket.
3. During the charging, the icon on the upper right corner
of the screen is in an animated status.
4. When the charging icon is blinking, the phone is fully
charged.
5. Disconnect the charger from the AC power socket.
6. Press the gray buttons on both sides of the charger
connector to disconnect the charger from the phone.
Using the Function Menu
1. In the standby mode, press .
2. Press to select a function menu.
3. Press to display the selected menu.
6
4. Display the submenu by one of the following options:
Press to select a submenu and press to
display the selected submenu.
Press the number key corresponding to the serial number
of a submenu to display it.
5. Press to return to the previous menu or quit the
function menu.
6. Press to return to the standby screen.
3
Voice Services
Making a Call
1. In the standby mode, press the number keys to enter a
phone number.
2. Press to dial the number.
3. Press to end the call or cancel the dialing.
Table of contents
Other Huawei Cell Phone manuals
Huawei
Huawei C8100 User manual
Huawei
Huawei ASCEND M860 User manual
Huawei
Huawei U3307 User manual
Huawei
Huawei Ascend Q User manual
Huawei
Huawei G3501 User manual
Huawei
Huawei P40 Pro+ User manual
Huawei
Huawei Mobile Phones User manual
Huawei
Huawei Ascend Y320 User manual
Huawei
Huawei NAM-LX9 User manual
Huawei
Huawei CRR-L09 User manual
Huawei
Huawei honor DUA-AL00 User manual
Huawei
Huawei Ascend P2 User manual
Huawei
Huawei MRD-LX1N User manual
Huawei
Huawei Nova 3i User manual
Huawei
Huawei BLA-L09 User manual
Huawei
Huawei U3100-5 User manual
Huawei
Huawei Mate Xs User manual
Huawei
Huawei POT-LX3 User manual
Huawei
Huawei Nova Y61 User manual
Huawei
Huawei C5600 User manual
