HPE 5945 Installation instructions
MF877-00 Page 1
Template Revision A
HPE instructions for this template are available at MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Networking Equipment
Marketing Name / Model
[List multiple models if applicable.]
HPE 5945 4-slot Switch JQ076A
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by EU
directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
6
Batteries
All types including standard alkaline and lithium coin
or button style batteries
0
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
0
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
0
External electrical cables and cords
0
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0
Components, parts and materials containing
0
MF877-00 Page 2
Template Revision A
HPE instructions for this template are available at MF877-01
Item Description
Notes
Quantity
of items
included
in product
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Phillips screwdriver
2#
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Remove all the blank panel.
2. Remove film 1-1 from panel 1-2.
3. Remove shielding fingers 2-1 from panel 2-2.
4. Unscrew all screws 3, then remove the cover assembly 4 and management panel 5.
5. Remove lab 4-3,4-4,4-5,4-6 and foam 4-2 from cover 4-1.
6. Remove film 5-1 and film 5-3 from panel 5-2.
7. Unscrew all screws 6 and screws 7, then remove the pcb 8,10,11 and air guide 9.
8. Remove dowel 8-1, dowel bushing 8-2, spring 8-3 and radiator 8-4 from pcb 8-5.
9. Unscrew all screws 10-1, then separation of pcb 10-2 and pcb 10-4, then remove the double-screw belts 10-3.
10. Unscrew all screws 11-5, then separation of pcb 11-6 and pcb 11-7, then remove dowel 11-1, dowel bushing 11-2,
spring 11-3 and radiator 11-4 from pcb 11-7.
11. Unscrew all double-screw belts 12 and radiator's screws, then remove radiator 13 and pcb 14.
12. Unscrew all screws 14-1, then remove handle 14-2 from pcb 14-3.
13. Unscrew all screws 15 and screws 17, then remove film 16 and support panel 18.
14. Unscrew all screws 19 and double-screw belts 21, then remove rack 20 and pcb 22.
15. Unscrew all screws 22-1, then remove confluence bar 22-2 from pcb 22-3.
16. Separation of film 23,27, shielding fingers 24, foam 25 and conductive foam 26 from base 28.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
MF877-00 Page 9
Template Revision A
HPE instructions for this template are available at MF877-01
Figure 10 Unscrew all screws 11-5, then separation of pcb 11-6 and pcb 11-7, then remove dowel 11-1,
dowel bushing 11-2, spring 11-3 and radiator 11-4 from pcb 11-7
Figure 11 Unscrew all double-screw belts 12 and radiator's screws, then remove radiator 13 and pcb 14
This manual suits for next models
1
Other HPE Switch manuals
HPE
HPE FlexFabric 5700 Series User manual
HPE
HPE FlexFabric 7900 Series Installation manual
HPE
HPE 3100 v2 Series User manual
HPE
HPE FlexNetwork 10500 SERIES Installation manual
HPE
HPE FlexNetwork 7500 Series Installation manual
HPE
HPE FlexFabric 5950 Series User manual
HPE
HPE FlexNetwork 10500 SERIES User manual
HPE
HPE FlexFabric 12900E User manual
HPE
HPE FlexFabric 5940 SERIES Installation manual
HPE
HPE FlexNetwork 10500 SERIES User manual
HPE
HPE OfficeConnect 1910 Series Safety guide
HPE
HPE FlexNetwork 5130 EI Series Instruction Manual
HPE
HPE Aruba Instant On 1960 Assembly instructions
HPE
HPE H3C S9500 Series User manual
HPE
HPE FlexFabric 12900E Installation manual
HPE
HPE 5920 series Installation manual
HPE
HPE FlexNetwork 10500 SERIES User manual
HPE
HPE Aruba 3810M Assembly instructions
HPE
HPE FlexNetwork NJ5000 5G PoE Plus Walljack User manual
HPE
HPE Altoline 6822 48XG 6QSFP28 x86 ONIE Assembly instructions
