HP ProCurve 1700-8 User manual

Installation and Getting

Started Guide

www.procurve.com

ProCurve Switch 1700-8

Installation and Getting

Started Guide

Development Company L.P.

The information contained herein is

subject to change without notice.

This document contains proprietary

information, which is protected by

be photocopied, reproduced, or

translated into another language without

prior written consent of Hewlett-Packard.

Publication Number

5991-6267

March 2007

Applicable Product

ProCurve Switch 1700-8 (J9079A)

Safety

Before installing and operating this

product, please read the “Installation

Precautions:” in Chapter 2, “Installing the

Switch”, and the safety statements in

Appendix B, “Safety and EMC Regulatory

Statements”.

Disclaimer

HEWLETT-PACKARDCOMPANYMAKES

NO WARRANTY OF ANY KIND WITH

REGARD TO THIS MATERIAL,

INCLUDING, BUT NOT LIMITED TO,

THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE. Hewlett-

Packard shall not be liable for errors

contained herein or for incidental or

consequential damages in connection

with the furnishing, performance, or use

of this material.

The only warranties for HP products and

services are set forth in the express

warranty statements accompanying such

products and services. Nothing herein

should be construed as constituting an

additional warranty. HP shall not be liable

for technical or editorial errors or omis-

sions contained herein.

Hewlett-Packard assumes no responsi-

bility for the use or reliability of its soft-

ware on equipment that is not furnished

by Hewlett-Packard.

Warranty

See the Customer Support/Warranty

booklet included with the product.

A copy of the specific warranty terms

applicable to your Hewlett-Packard

products and replacement parts can be

obtained from your HP Sales and Service

Office or authorized dealer.

Contents

iii

1 Switch Overview

Switch Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Switch Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

2 Installing the Switch

Included Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Installation Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Installation Precautions: . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

1. Prepare the Installation Site . . . . . . . . . . . . . . . . . . . . . . 2-5

2. Verify the Switch Passes Self Test . . . . . . . . . . . . . . . . . 2-6

3. Mount the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

4. Connect the Switch to a Power Source . . . . . . . . . . . . . 2-8

5. Connect the Network Cables . . . . . . . . . . . . . . . . . . . . . 2-9

3 Configuring the Switch

Initial Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Changing PC’s IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Where to Go From Here . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

4 Troubleshooting

Basic Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Diagnosing With the LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Forgotten the IP Address or Password . . . . . . . . . . . . . . . 4-4

Hardware Diagnostic Tests . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Testing the Switch by Resetting It . . . . . . . . . . . . . . . . . . 4-4

HP Customer Support Services . . . . . . . . . . . . . . . . . . . . . 4-5

Before Calling Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

A Specifications

Physical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

B Safety and EMC Regulatory Statements

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

EMC Regulatory Statements . . . . . . . . . . . . . . . . . . . . . . . B-13

C Recycle Statements

Waste Electrical and Electronic Equipment (WEEE)

Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1

Index

1-1

Switch Overview

Switch Hardware Features

The ProCurve Switch 1700-8 (J9079A) is a multiport switch that can

be used to build high-performance switched workgroup networks.

This switch is a store-and-forward device that offers low latency for

high-speed networking.

Switch Ports

The switch has 7 auto-sensing 10/100Base-TX ports and 1 auto-

sensing 10/100/1000Base-T auto MDI/MDI-X RJ-45 port. With this

switch you can directly connect computers, printers, and servers to

provide dedicated bandwidth to those devices, and you can build a

switched network infrastructure by connecting it to hubs, other

switches, or routers. In addition, the switch offers network

management capabilities.

Power

LED 10/100Base-TX RJ-45 ports

(all ports have the HP Auto-MDIX feature)

Link/Act, FDx, and Spd

LEDs for each port ProCurve Switch 1700-8

10/100/1000 Base-T

RJ-45 ports

1-2

Switch Overview

Switch Hardware Features

LEDs

The front panel of the switch provides status LEDs for system

monitoring. The following table details the functions of the various

indicators.

System LED State Meaning

Power

(green) On The switch is receiving power.

Off The switch is NOT receiving power.

Port LED State Meaning

Link/Act

(green –

overlaid with

the port

number)

On The port is enabled and receiving a linkindication

from the connected device.

Off The port has no active network cable connected,

or is not receiving link signal.

Flashing Indicates that there is network activity on the

port.

FDx

(green) On Indicates the port is operating at full duplex

Off Indicates the port is operating at half duplex

Spd

(green) On • Ports 1-7: Indicates the port is operating at

100 Mbps.

• Port 8: Indicates the port is operating at 100 or

1000 Mbps.

Off • Ports 1-7: Indicates the port is operating at

10 Mbps.

• Port 8: Indicates the port is operating at

10 Mbps.

1-3

Switch Overview

Switch Hardware Features

Switch Features

The features of the ProCurve Switch 1700-8 include:

■7 auto-sensing 10/100Base-TX ports and 1 auto-sensing 10/100/

1000Base-T RJ-45 port.

■plug-and-play networking—all ports are enabled—just connect

the network cables to active network devices and your switched

network is operational.

■IEEE 802.3ab Auto MDI /MDI-X on all twisted-pair ports, meaning

that all connections can be made using straight-through twisted-

pair cables. Cross-over cables are not required, although they will

also work. The pin operation of each port is automatically

adjusted for the attached device: if the switch detects that a 10/

100 Mbps switch or hub is connected to the port, it configures the

port as MDI; if the switch detects that a 10/100 Mbps end-node

device is connected to the port, it configures the port as MDI-X.

■automatic learning of the network addresses in each switch’s

8000- address forwarding table.

■automatically negotiated full-duplex operation for all 10/100/

1000Base-T RJ-45 ports when connected to other auto-

negotiating devices.

■easy management of the switch through several available

interfaces:

• Web browser interface — an easy to use built-in graphical

interface that can be accessed from common Web browsers.

• ProCurve Manager (PCM) — allows network administrators

to discover and map the ProCurve Switch 1700 within their

network and launch the ProCurve Switch 1700's built-in

graphical interface from within PCM to configure the switch.

■support for up to 64 IEEE 802.1Q-compliant VLANs so you can

divide the attached end nodes into logical groupings that fit your

business needs.

1-4

Switch Overview

Switch Hardware Features

■support for up to 4 trunks so you to assign physical links to one

logical link (trunk) that functions as a single, higher-speed link

providing dramatically increased bandwidth.

■support for many advanced features to enhance network

performance—for a description, see the Management and

Configuration Guide.

■download of new switch software for product bug fixes.

■supports pass through (flooding) of spanning tree BPDUs so that

upstream devices on the network which support Spanning Tree

Protocol can detect loops that exist on the ProCurve Switch 1700

interface.

This manual suits for next models

Table of contents

Other HP Switch manuals

HP ProCurve 6120G/XG User manual

HP 6125G User manual

HP 6200YL Installation guide

HP FlexFabric 5930-32QSFP+ User manual

HP J9310A Assembly instructions

HP 6125G User manual

HP Enterprise OfficeConnect 1405 v3 Series User manual

HP J3128A AdvanceStack 10Base-T Hub-8E User manual

HP StorageWorks 7110 - Virtual Array User manual

HP A7533A - Brocade 4Gb SAN Switch Base Operating and maintenance manual

HP A7533A - Brocade 4Gb SAN Switch Base Instruction Manual

HP Aruba Instant On 1430 5G Assembly instructions

HP Brocade 4Gb SAN Switch User manual

HP ProCurve 9408sl User manual

HP Procurve Series 4100GL User manual

HP ProCurve 2510G Series User manual

HP 279720-B21 - ProLiant BL p-Class F-GbE... Installation guide

HP 6125XLG User manual

HP AK241A - StorageWorks 8Gb Simple SAN... User manual

HP StorageWorks 2/16 - SAN Switch User manual

HP 10500 series User manual

HP V1910 User manual

HP ProCurve 2610 Series Manual

HP 6200YL User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual