HP 1405-5 User manual
HP 1405 Switch Series
Installation and Getting Started Guide
HP 1405-5 Switch (J9791A)
HP 1405-5G Switch (J9792A)
HP 1405-8 Switch (J9793A)
HP 1405-8G Switch (J9794A)
HP 1405 Switch Series
Installation and Getting Started Guide
Hewlett-Packard Company
8000 Foothills Boulevard, m/s 5551
Roseville, California 95747-5551
www.hp.com/networking
© Copyright 2012 Hewlett-Packard Development
Company, L.P.
Manual Part Number
5998-3081
May 2012
Applicable Products
Disclaimer
HEWLETT-PACKARD COMPANY MAKES NO WARRANTY
OF ANY KIND WITH REGARD TO THIS MATERIAL,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not
be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing,
performance, or use of this material.
The information contained herein is subject to change
without notice. The only warranties for HP products and
services are set forth in the express warranty statements
accompanying such products and services. Nothing herein
should be construed as constituting an additional warranty.
HP shall not be liable for technical or editorial errors or
omissions contained herein.
Hewlett-Packard assumes no responsibility for the use or
reliability of its software on equipment that is not furnished
by Hewlett-Packard.
Warranty
For the latest license and warranty information, visit
www.hp.com/networking/support.
A copy of the specific warranty terms applicable to your
Hewlett-Packard products and replacement parts can be
obtained from your HP Sales and Service Office or
authorized dealer.
Safety
Before installing and operating these products, please read
the “Installation Precautions” in chapter 2, “Installing the
Switch”, and the safety statements in the General Safety and
Regulatory Information booklet included with the product.
HP 1405-5 Switch (J9791A)
HP 1405-5G Switch (J9792A)
HP 1405-8 Switch (J9793A)
HP 1405-8G Switch (J9794A)
iii
1 Introducing the Switch
Front of the Switch .............................................. 1-2
Network Ports ..............................................1-3
LEDs ......................................................1-3
Back of the Switch ..............................................1-4
Power Connector ...........................................1-4
Switch Features ................................................1-5
2 Installing the Switch
Included Parts ..................................................2-1
Installation Precautions ......................................2-3
Installation Procedures .......................................... 2-4
1. Prepare the Installation Site ................................2-5
2. Verify the Switch Passes Self Test ...........................2-6
LED Behavior ........................................... 2-8
3. Mount the Switch .........................................2-8
Wall Mounting ........................................... 2-8
Horizontal Surface Mounting ..............................2-9
4. Connect the Switch to a Power Source ......................2-11
5. Connect the Network Cables ...............................2-12
Using the RJ-45 Connectors ..............................2-12
Sample Network Topologies .....................................2-13
3 Troubleshooting
Basic Troubleshooting Tips ...................................... 3-1
Diagnosing with the LEDs ........................................3-3
LED patterns for General Switch Troubleshooting ...............3-3
Hardware Diagnostic Tests .......................................3-5
Testing the Switch by Resetting It .............................3-5
Testing Twisted-Pair Cabling ..................................3-5
Contents
iv
Contents
Testing End-to-End Network Communications ..................3-5
HP Customer Support Services ................................... 3-6
Before Calling Support .......................................3-6
A Specifications
Switch Specifications ........................................... A-1
Physical ................................................... A-1
Electrical ................................................. A-1
Environmental ............................................. A-2
Acoustics ................................................. A-2
Safety .................................................... A-2
Cabling and Technology Information Specifications ................. A-3
Twisted-Pair Cable/Connector Pin-Outs ........................... A-4
Straight-through Twisted-Pair Cable for
10 Mbps or 100 Mbps Network Connections .................... A-6
Cable Diagram ......................................... A-6
Pin Assignments ........................................ A-6
Crossover Twisted-Pair Cable for
10 Mbps or 100 Mbps Network Connection ..................... A-7
Cable Diagram ......................................... A-7
Pin Assignments ........................................ A-7
Straight-Through Twisted-Pair Cable for
1000 Mbps Network Connections ............................. A-8
Cable Diagram ......................................... A-8
Pin Assignments ........................................ A-8
B EMC Regulatory Statements
Regulatory Statements .......................................... B-1
Index
1-1
1
Introducing the Switch
The HP 1405-5, 1405-5G, 1405-8, and 1405-8G Switches are multiport
unmanaged switches that can be used to build high-performance switched
workgroup networks. These switches are store-and-forward devices that offer
low latency for high-speed networking.
Throughout this manual, these switches will be referred to as the 1405-5
Switch, 1405-5G Switch, 1405-8 Switch, and 1405-8G Switch.
■The 1405-5 Switch has 5 auto-sensing 10/100Base-TX RJ-45 ports.
■The 1405-5G Switch has 5 auto-sensing 10/100/1000Base-T RJ-45 ports.
■The 1405-8 Switch has 8 auto-sensing 10/100Base-TX RJ-45 ports.
■The 1405-8G Switch has 8 auto-sensing 10/100/1000Base-T RJ-45 ports.
These switches can be directly connected to computers, printers, and servers
to provide dedicated bandwidth to those devices, and you can build a switched
network infrastructure by connecting the switch to other switches or routers.
54321
87654321
HP 1405-5 Switch (J9791A)
HP 1405-5G Switch (J9792A)
HP 1405-8 Switch (J9793A)
HP 1405-8G Switch (J9794A)
1-2
Introducing the Switch
Front of the Switch
Front of the Switch
5
4
321
HP 1405-5 Switch (J9791A)
HP 1405-5G Switch (J9792A)
Power LED
Link/Activity LEDs
8765
4
321
HP 1405-8 Switch (J9793A)
HP 1405-8G Switch (J9794A)
Power LED
Link/Activity LEDs
1-3
Introducing the Switch
Front of the Switch
Network Ports
The network ports support “Auto-MDIX” feature, which means that you can
use either straight-through or crossover twisted-pair cables to connect any
network devices to the switch.
■5 or 8 auto-sensing 10/100Base-TX ports.
■5 or 8 auto-sensing 10/100/1000Base-T ports (for 1405-5G and 1405-8G
only).
LEDs
The front panels of the switches provide status LEDs for system monitoring.
Table 1-1 details the functions of the LED indicators.
Table 1-1. Switch Status LEDs
Switch LEDs State Meaning
HP Power LED
(white)
On The switch is properly receiving power.
Off No power connection. The switch is NOT receiving power.
Port LEDs
Link/Act
(blue)
On The port is enabled and receiving a link indication from the connected device.
Off One of these condition exists:
• no active network cable is connected to the port
• the port is not receiving link beat or sufficient light
Flashing1Indicates that there is network activity on the port.
1The flashing behavior is an on/off cycle once every 0.083 seconds approximately.
1-4
Introducing the Switch
Back of the Switch
Back of the Switch
Power Connector
The switches do not have a power switch. They are powered on when the
external AC/DC power adapter is connected to the switch and to a power
source. The external AC/DC power adapter supplies 12 volts DC to the switch
and automatically adjusts to any AC voltage between 100-240 volts and either
50 or 60 Hz. No voltage range settings are required.
54321
87654321
RJ-45 ports DC power connector
HP 1405-5 Switch (J9791A)
HP 1405-5G Switch (J9792A)
HP 1405-8 Switch (J9793A)
HP 1405-8G Switch (J9794A)
RJ-45 ports DC power connector
Other manuals for 1405-5
1
This manual suits for next models
3
Table of contents
Other HP Switch manuals
HP
HP Aruba Instant On 1930 Assembly instructions
HP
HP StorageWorks MSA 2/8 - SAN Switch User manual
HP
HP Aruba 8325 Series User manual
HP
HP aruba 9300-32D Series User manual
HP
HP SN8000B User manual
HP
HP Voltaire InfiniBand Grid Director 4200 QDR Operator's manual
HP
HP ProCurve Switch 2650 Manual
HP
HP A7533A - Brocade 4Gb SAN Switch Base Operating and maintenance manual
HP
HP Compaq Presario,Presario 1905 User manual
HP
HP ProCurve 408 User manual
HP
HP A7340A - Surestore FC 1Gb/2Gb Switch 16B Instruction Manual
HP
HP 3600 v2 Series User manual
HP
HP A7500 Series User manual
HP
HP 377707-002 User manual
HP
HP HP 2530 User manual
HP
HP GbE2c User manual
HP
HP A7533A - Brocade 4Gb SAN Switch Base Instruction Manual
HP
HP ProCurve 1400-8G User manual
HP
HP J9311A Assembly instructions
HP
HP STORAGEWORKS A7540-96010 User manual
