HP 1032 User manual

ClusterPack

Index of Tutorial Sections

Administrators Guide

1.0 ClusterPack Install QuickStart

1.1 ClusterPack General Overview

1.2 Comprehensive Install Instructions

1.3 Installation and Configuration of Optional Components

1.4 Software Upgrades and Reinstalls

1.5 Golden Image Tasks

1.6 System Maintenance Tasks

1.7 System Monitoring Tasks

1.8 Workload Management Tasks

1.9 System Troubleshooting Tasks

Users Guide

2.1 Job Management Tasks

2.2 File Transfer Tasks

2.3 Miscellaneous Tasks

Tool Overview

3.1 Cluster Management Utility Zone Overview

3.2 Service ControlManager (SCM) Overview

3.3 System Inventory Manager Overview

3.4 Application ReStart (AppRS) Overview

3.5 Cluster Management Utility (CMU) Overview

3.6 NAT/IPFilter Overview

3.7 Platform Computing Clusterware Pro V5.1 Overview

3.8 Management Processor (MP) Card Interface Overview

3.9 HP Systems Insight Manager (HPSIM) Overview

Related Documents

4.1 Related Documents

ackard company

Dictionar

of Cluster Terms

ClusterPack Install QuickStart

ClusterPack

ClusterPack Install QuickStart

1.0.1 How Can I Get My HP-UX Cluster Running?

Step Q1 Fill Out the ClusterPack Installation Worksheet

Step Q2 Install Prerequisites

Step Q3 Allocate File System Space

Step Q4 Obtain a License File

Step Q5 Prepare Hardware Access

Step Q6 Power Up the Management Server

Step Q7 Configure the ProCurve Switch

Step Q8 Copy the License Files to the Management Server

Step Q9 Install ClusterPack on the Management Server

Step Q10 Run manager_config on the Management Server

Step Q11 Run mp_register on the Management Server

Step Q12 Power up the Compute Nodes

Step Q13 Run compute_config on the Management Server

Step Q14 Run finalize_config on the Management Server

1.0.1 How Can I Get My HP-UX Cluster Running?

If you have installed ClusterPack before, follow the instructions in this section as a quick

reminder. You can refer to the detailed instructions for any given step via the links provided.

If you have not installed ClusterPack before, use the Comprehensive Install Instructions

section instead. This QuickStart Guide does NOT cover the use of Golden Images. If you

wish to use Golden Images, use the Comprehensive Install Instructions section instead.

Note:

If you do the installation steps out of order or omit steps, your installation

will leave your systems in an unknown and non-deterministic state.

Step Q1 Fill Out the ClusterPack Installation Worksheet

Print out this form and fill out all information for each node in your cluster.

Installation Worksheet (pdf)

Note:

You will not be able to complete the following steps if you have not

collected all of this information.

For more information, see the Comprehensive Instructions for this step.

References:

zStep 1 Fill Out the ClusterPack Installation Worksheet

Step Q2 Install Prerequisites

Install the following software on the Management Server.

zHP-UX 11i Ignite-UX

zHP-UX 11i V2.0 TCOE

Install the following software on each Compute Node.

zHP-UX 11i Ignite-UX

zHP-UX 11i V2.0 TCOE

Allow the default choices to install.

ClusterPack requires a homogeneous operating system environment. That is, all Compute

odes and the Management Server must have the same release of HP-UX installed as well

as the same operating environment.

The Management Server requires at least one LAN connection. The manager must be able

to contact all the compute nodes using a "management network" that will ve configured by

Clusterpack. In addition, the management server must be able to connect to all the MP cards

on the compute nodes. No network connections need to be configured before installing

Clusterpack, the console interface can be used for all installation and configuration steps.

The Compute Nodes must have Management Processor (MP) cards.

ClusterPack depends on certain open source software which is normally installed as a part

of the operating environment. The minimum release versions required are:

zMySQL Version 3.23.58 or higher

zPerl Version 5.8 or higher

For more information, see the Comprehensive Instructions for this step.

References:

zStep 2 Install Prerequisites

Step Q3 Allocate File System Space

Allocate file system space on the Management Server. Minimum requirements are listed

below.

z/var - 4GB

z/opt - 4GB

z/share - 500MB (Clusterware edition only)

For more information, see the Comprehensive Instructions for this step.

References:

zStep 3 Allocate File System Space

Step Q4 Obtain a License File

zGet the Host ID number of the Management Server.

zContact Hewlett-Packard Licensing Services to redeem your license

certificates.

zIf you purchased the ClusterPack Base Edition, redeem the Base Edition

license certificate.

zIf you purchased the ClusterPack ClusterWare Edition, redeem the Base

Edition certificate and the ClusterWare edition certificate

Note:

It may take up to 24 hours to receive the license file. Plan accordingly.

For more information, see the Comprehensive Instructions for this step.

References:

zStep 4 Obtain a License File

Step Q5 Prepare Hardware Access

Get a serial console cable long enough to reach all the Compute Nodes from the

Management Server.

Note:

If you are installing ClusterPack on Compute Nodes for the first time, DO

NOT power up the systems, ClusterPack will do that for you automatically.

If you do accidentally power the compute nodes, DO NOT answer the HP-

UX boot questions.

For more information, see the Comprehensive Instructions for this step.

References:

zStep 5 Prepare Hardware Access

Step Q6 Power Up the Management Server

Perform a normal first boot for the Management Server.

For more information, see the Comprehensive Instructions for this step.

References:

zStep 6 Power Up the Management Server

Step Q7 Configure the ProCurve Switch

zSelect an IP address from the same IP subnet that will be used for the

Compute Nodes.

zConnect a console to the switch

zLog onto the switch through the console

zType 'set-up'

zSelect IP Config and select the "manual" option

zSelect the IP address field and enter the IP address to be used for the

switch

For more information, see the Comprehensive Instructions for this step.

References:

zStep 7 Configure the ProCurve Switch

Step Q8 Copy the License Files to the Management Server

Put the files in any convenient directory on the Management Server (e.g. /tmp).

For more information, see the Comprehensive Instructions for this step.

References:

zStep 8 Copy the License Files to the Management Server

Step Q9 Install ClusterPack on the Management Server

zMount and register the ClusterPack DVD as a software depot.

zInstall the ClusterPack Manager software (CPACK-MGR) using

swinstall.

zLeave the DVD in the DVD drive for the next step.

For more information, see the Comprehensive Instructions for this step.

References:

zStep 9 Install ClusterPack on the Management Server

Step Q10 Run manager_config on the Management Server

Provide the following information to the manager_config program:

zThe path to the license file(s),

zThe DNS domain and optional NIS domain for the cluster,

zThe host name of the manager and the name of the cluster,

zThe management LAN interface on the Management Server,

zThe IP address(es) of the Compute Node(s),

zWhether to mount a home directory,

zWhether to configure SCM / SysInvMgr or HP SIM software ,

zThe LSF admin password. (Clusterware edition only)

For more information, see the Comprehensive Instructions for this step.

References:

zStep 10 Run manager_config on the Management Server

Step Q11 Run mp_register on the Management Server

Provide the following information to the mp_register program about each Management

Processor card that is connected to a Compute Node:

zIP address,

znetmask,

zgateway IP address.

The information can be provided to mp_register in a file. See the mp_register(1) man page

for the file format.

For more information, see the Comprehensive Instructions for this step.

References:

zStep 11 Run mp_register on the Management Server

Step Q12 Power up the Compute Nodes

Use the clbootnodes program to power up all Compute Nodes that have a connected

Management Processor that you specified in the previous step. The clbootnodes program

will provide the following information to the Compute Nodes:

zLanguage to use,

zHost name,

zTime and time zone settings,

zNetwork configuration,

zRoot password.

For more information, see the Comprehensive Instructions for this step.

References:

zStep 12 Power up the Compute Nodes

Step Q13 Run compute_config on the Management Server

The compute_config program will register the nodes with various programs.

For more information, see the Comprehensive Instructions for this step.

References:

zStep 13 Run compute_config on the Management Server

Step Q14 Run finalize_config on the Management Server

This program completes the installation and configuration process, verifies the Cluster

Management Software, and validates the installation. If it reports diagnostic error messages,

ackard company

repeat the installation process, performing all steps in the order specified.

For more information, see the Comprehensive Instructions for this step.

References:

zStep 14 Set up HyperFabric (optional)

This manual suits for next models

Table of contents

Other HP Software manuals

HP CN088A - Serif PosterDesigner Pro Operation instructions

HP HP 2605dn Print Drivers Service manual

HP StorageWorks MSA 2/8 - SAN Switch User manual

HP D5970A - NetServer - LCII User manual

HP BladeSystem Dual NC370i - Multifunction Network... User manual

HP mfp digital sending software v. 4 Installation instructions

HP BladeSystem Dual NC370i - Multifunction Network... Instruction Manual

HP Data Protector A.06.11 User manual

HP ProLiant BL420c User manual

HP D2D User manual

HP P9000 Instruction Manual

HP Integrity rx2800 - i2 User manual

HP NonStop SSH 544701-014 User manual

HP t5630 - Thin Client Installation and operating instructions

HP Data Protector A.06.11 User manual

HP NonStop Pathway/iTS Owner's manual

HP ProBook 4325s - Notebook PC User manual

HP Xw4300 - Workstation - 2 GB RAM Quick reference guide

HP C7791C - DesignJet 130 Color Inkjet Printer Configuration guide

HP HP LaserJet 2605, 2605dn, 2605dtn Service manual

HP Bc1500 - BladeSystem - Blade PC User manual

HP Brio BA200 User manual

HP T5145 - Thin Client - Tower Service manual

HP dc5750 - Microtower PC User manual

Popular Software manuals by other brands

COMPRO

COMPRO COMPROFM manual

Muratec

Muratec OFFICEBRIDGE ONLINE user guide

Oracle

Oracle Contact Center Anywhere 8.1 installation guide

Adobe

Adobe 65007312 - Photoshop Lightroom Programmer's guide

Avaya

Avaya NULL One-X for RIM Blackberry user guide

PS Audio

PS Audio PowerPlay Programming manual

Brady

Brady LOCKOUT PRO 3.0 Administrator's guide

Avaya

Avaya Interaction Center user guide

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Guide book

Novell

Novell GROUPWISE 8 - INTERNET AGENT manual

Oracle

Oracle Application 9i Configuration guide

Acer

Acer RDM user guide

Canon

Canon Vixia HF21 instruction manual

Canon

Canon ZR950 instruction manual

Samsung

Samsung Auto Backup user manual

Polycom

Polycom Vortex EF2201 Application note

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c user manual

Novell

Novell SP2 - S release note