HP DESKJET 350 User manual

Other manuals for DESKJET 350

1

This manual suits for next models

1

Table of contents

Other HP Rack & Stand manuals

HP

HP Intelligent Series User manual

HP

HP HP 10000 G2 Series User manual

HP

HP 669048-009 User manual

HP

HP E1586A User manual

HP

HP 245161-B22 - 10642 42U Rack Shock Pallet User manual

HP

HP Z600 - Workstation - 6 GB RAM User manual

HP

HP TFT7600 G2 User manual

HP

HP Quick Release EM870AA User instructions

HP

HP Proliant DL580 User manual

HP

HP Model 745 - VME Workstation User manual

HP

HP AT-BT10 User manual

HP

HP Rack System/E User manual

HP

HP P5389A - Intel Pentium III-S 1.4 GHz Processor... User manual

HP

HP 6400/8400 User manual

HP

HP J1530C User manual

HP

HP ML110 - ProLiant G5 2TB Storage Server NAS User manual

HP

HP System/E41 User manual

HP

HP LaserJet Enterprise 600 User manual

HP

HP cc2300 User manual

HP

HP HP 10000 G2 Series User manual

HP

HP 245161-B22 - 10642 42U Rack Shock Pallet Instructions for use

HP

HP AT-BT10 User manual

HP

HP 355 User manual

HP

HP D7171A - NetServer - LPr User manual

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 

HP 350 Cloud-Managed

Access Point Wall Mount Kit

Installation Guide

HP 350 AP Wall Mount Kit | Installation Guide 2

Package contents

lMount housing

lMounting bracket

l2 RJ-45 cable adapters

l4 #6 machine screws

l2 pan head screws

lT8 Torx security screw

lPaper template for screw holes

lDocumentation

Description

The HP 350 Wall Mount Kit securely mounts the HP 350 to flat surfaces, such as a wall or

ceiling, and is also compatible with single and dual gang wall boxes.

HP 350 Cloud-Managed Access Point Wall Mount Kit (JL018A)

Installation Guide

3 HP 350 AP Wall Mount Kit | Installation Guide

Installation

Complete the following steps to install your access point using the HP 350 AP Wall Mount

Kit.

lTo install the HP 350 Mount Kit on a flat surface, see Installing the mount housing on a

flat surface on page 3.

lTo install the HP 350 Mount Kit onto a wall box, see Installing the mount housing onto

a wall box on page 6.

Installing the mount housing on a flat surface

1. Hold the paper template included with this mount kit against the surface where you

want to installthe mounting bracket, and mark the location of the screw holes.

2. Drill holes at the points indicated.

3. Install wall anchors if necessary. Wall anchors are not included in this kit.

4. Align the screw holes in the mounting bracket with the previously installed wall anchors

or marked drill holes and secure into place. See Figure 1.

Figure 1: Securing the mount housing to a flat surface using wall anchors

5. (Optional) Remove the RJ-45 cable adapters from their bag, match the female

connectors to the tracks at the upper corners of the mount housing as shown in Figure

2. The adapter is secured when it clicks into place.

HP 350 AP Wall Mount Kit | Installation Guide 4

5 HP 350 AP Wall Mount Kit | Installation Guide

Figure 2: Attaching the cable adapters

6. Route the Ethernet and optional power cord, if using, through the bottom-right

opening of the housing and guide through the top right opening at the back of the

housing. See Figure 3.

Figure 3: Routing the Ethernet cable through the mount housing

7. Proceed to Inserting the mounting bracket into the housing on page 8.

Installing the mount housing onto a wall box

1. Route the Ethernet cable from the wall box and through top-right opening in the back

of the mount housing, as indicated in Figure 3.

HP 350 AP Wall Mount Kit | Installation Guide 6

7 HP 350 AP Wall Mount Kit | Installation Guide

Figure 4: Aligning the mount housing with a single wall box (left) or dual wall box

(right)

2. Align the screw holes on the back of the mount housing with the corresponding holes

on the wall box, and then attach the housing using the #6 machine screws.

The #6 machine screws do not fit all wallboxes.

Inserting the mounting bracket into the housing

1. Align the mounting bracket with the release button at the bottom, and then route the

Ethernet cable through the top right opening of the mounting bracket. See Figure 5.

Figure 5: Inserting the mounting bracket with routed Ethernet cable

release button

HP 350 AP Wall Mount Kit | Installation Guide 8

9 HP 350 AP Wall Mount Kit | Installation Guide

2. Route the optional power cord, if using, through the top left opening of the mounting

bracket.

3. (Optional) to use the RJ-45 cable adapters, route one cable through the upper-right

opening in the bracket, and then place the unused cable in the space between the

housing and mounting bracket.

4. Press the mounting bracket into the housing, and then secure it using the pan head

screws.

Attaching the HP 350 to the mounting bracket

1. Plug the Ethernet cable and optional power cord, if using, into the corresponding ports

on the back of the HP 350.

2. Orient the HP 350 so the mounting pins are horizontal, and align with the slots on the

mounting bracket. See Figure 6.

3. Press and hold the release button at the bottom of the mounting bracket, slide the pins

on the back of the HP 350 into the mounting bracket, then release the button to secure

the HP 350 onto the mounting bracket.

Figure 6: Attaching the HP 350 onto the mount kit

4. (Optional) To use the RJ-45 cable adapter, plug the Ethernet cable into the active port

on the side of the mounting kit.

Installing the T8 Torx security screw

5. Insert the T8 Torx security screw into the hole at the bottom of the mount (to the right

of the release button), and tighten.

HP 350 AP Wall Mount Kit | Installation Guide 10