HP Compaq NX9008 User guide

Startup Guide

HP Compaq Notebook Series

Document Part Number: 333953-001

August 2003

This guide explains how to set up your hardware and software, locate

and install the latest versions of HP software, and locate additional

information and support. This guide also introduces you to exterior

features of the notebook.

Microsoft and Windows are trademarks of Microsoft Corporation in the U.S.

and/or other countries. SD Logo is a trademark.

The information contained herein is subject to change without notice. The only

warranties for HP products and services are set forth in the express warranty

statements accompanying such products and services. Nothing herein should be

construed as constituting an additional warranty. HP shall not be liable for technical

or editorial errors or omissions contained herein.

Startup Guide

HP Compaq Notebook Series

Reference Number: nc8000/nw8000

First Edition August 2003

Document Part Number: 333953-001

Contents

1 Hardware and Software Setup

Setting Up the Hardware ............................................................... 1–1

Setting Up the Software................................................................. 1–5

Installing Optional Software ................................................... 1–6

Selecting Regional Settings .................................................... 1–7

Selecting Screen Settings........................................................ 1–8

Setting Up Wireless LAN ....................................................... 1–8

Setting Up Bluetooth............................................................. 1–10

Safeguarding the Notebook ......................................................... 1–11

Protecting the Notebook Against Viruses............................. 1–11

Turning Off the Notebook .................................................... 1–11

Using the Notebook Safely.......................................................... 1–11

Regulatory and Safety Information ............................................. 1–12

2 Additional Information, Help, and Updates

Using the Documentation Library CD .......................................... 2–1

Getting Help .................................................................................. 2–3

Using the Help and Support Center in

Windows XP ........................................................................... 2–3

Contacting Technical Support................................................. 2–4

Installing a Retail Version of an Operating System ...................... 2–6

Startup Guide iii

Contents

3 Notebook Features

Pointing Device Components ........................................................ 3–1

Top Components ........................................................................... 3–2

Lights............................................................................................. 3–5

Left Side Components ................................................................... 3–7

Right Side Components................................................................. 3–9

Front View Components.............................................................. 3–11

Rear Panel Components .............................................................. 3–12

Bottom Components.................................................................... 3–14

Labels .......................................................................................... 3–16

Index

iv Startup Guide

Hardware and Software Setup

WARNING: This notebook is designed to run demanding

applications at full power. As a result of increased power

consumption, it is normal for the notebook to feel warm or

hot when used continuously. To avoid potential discomfort

or burns, do not block the air vents or use the notebook on

your lap for extended periods. The notebook complies with

the user-accessible surface temperature limits defined by

the International Standard for Safety of Information

Technology Equipment (IEC 60950).

NOTE: Because of limitations in current TFT manufacturing

technology, TFT displays may show imperfections as bright,

dim, or dark spots. HP does not guarantee that TFT displays

are free from such imperfections.

NOTE: For governmental agency and safety information, refer

on the Documentation Library CD to the Regulatory and Safety

Notices.

Setting Up the Hardware

CAUTION: To ensure that the correct drivers load and to prevent

file corruption or damage to the components during initial setup:

Do not set up the notebook while it is docked in an optional

Port Replicator.

Do not remove the battery pack until the notebook has been

connected to external AC power.

Run the notebook on external AC power, not on battery

power, throughout initial setup.

Startup Guide 1–1

Hardware and Software Setup

To set up the notebook:

1. Slide the primary battery pack into the battery bay until

it is seated.

NOTE: If you will not be using the notebook for 2 weeks or

more, removing the battery and storing it will prolong its life.

For more information, refer on the Documentation Library CD

to the Hardware Guide, “Battery Packs” chapter.

1–2 Startup Guide

Hardware and Software Setup

2. Connect the notebook to external AC power:

a. Place the notebook on a flat surface near an electrical

outlet.

b. Connect the AC adapter cable 1to the power connector

on the notebook.

c. Connect the power cord 2to the AC adapter.

d. Plug the power cord 3into an electrical outlet. (Power

cords and outlets vary by country.)

Startup Guide 1–3

Hardware and Software Setup

3. Open the notebook by pressing the display release latch 1

and lifting the display 2.

4. Turn on the notebook by pressing the power button.

1–4 Startup Guide

Hardware and Software Setup

After the notebook powers on:

The power/standby light turns on. (See “Lights” later in this

guide for more information.)

The battery pack in the battery bay begins to charge, and the

battery light turns on. (The battery light remains on while

the battery pack is charging and turns off after the battery

pack is fully charged. See “Lights” later in this guide for

more information.)

The software setup prompt displays on the screen.

Setting Up the Software

A prompt to set up your software displays on the screen when

the notebook is turned on for the first time. Before responding to

the prompt and proceeding through the onscreen instructions, read

the following caution and other installation information contained

in this chapter.

CAUTION: To prevent file corruption and to ensure that the correct

device drivers install, follow these guidelines during software

setup:

Do not unplug the notebook from the electrical outlet.

Do not shut down the notebook.

Do not remove or insert a drive.

After you begin the software setup, you must complete the

entire process without interruption. Setup time varies.

If you are prompted to select a language, choose carefully.

The languages you do not choose are deleted from the system

and cannot be restored once the setup process has begun.

If you are prompted to accept the End User License

Agreement, you must choose Accept to continue the

software setup.

Startup Guide 1–5

Hardware and Software Setup

Preloaded software applications are included with the

notebook but must be installed through the Software Setup

utility. Preinstalled software applications have already been

installed on the notebook and require no further installation

procedures.

This guide does not take into account any variation that may

result from the notebook being connected to a network.

This guide documents the Windows® 2000, Windows XP®

Professional, and Windows XP Home operating systems.

Any other operating systems installed on this notebook after

purchase may not match the descriptions and procedures

provided in this guide.

This guide documents the category view that is used by

default in Windows XP. If your notebook is set to classic

view, you may notice discrepancies between your notebook

and this documentation. For information on switching views,

see Windows XP Help and Support.

Installing Optional Software

You can install third-party software or preloaded utilities any time

after initial setup is complete.

To install third-party software, refer to the documentation

included with the software.

To install a preloaded utility:

In Windows 2000, select Start > Programs > Software

Setup.

In Windows XP, select Start > All Programs > Software

Setup.

A setup wizard loads and a list of applications displays. Select

the application you want to install and follow the instructions on

the screen.

1–6 Startup Guide

This manual suits for next models

Table of contents

Popular Laptop manuals by other brands

Velocity

Velocity NoteMagix M10 quick start guide

Dell

Dell Alienware 17 R2 Service manual

Toshiba

Toshiba A105-S2236 Specifications

Winbook

Winbook LM user guide

Dell

Dell Inspiron 1464 Setup guide

Dell

Dell Inspiron 15R 5537 quick start guide

Dell

Dell Latitude ATG D620 Service manual

Sony

Sony VAIO PCG-FX270 Specifications

Dell

Dell Latitude 7310 Service manual

Dell

Dell Precision GU806 Quick reference guide

Sony

Sony VAIO PCG-R505JLK user guide

Lenovo

Lenovo THINKPAD X32 Setup guide

Toshiba

Toshiba mini NB300 specification

Lenovo

Lenovo ThinkPad X201 Tablet Manual

Lenovo

Lenovo THINKPAD X31 Manual

Sony

Sony VGN-T240P VAIO Specifications

Compaq

Compaq Armada E700 Series reference guide

Fujitsu

Fujitsu Lifebook A6230 Specifications