HotWire RDE20.1 Troubleshooting guide
Quick Start Up Guide
Congratulations on the purchase of
your Hotwire Heating System.
The thermostat allows you to set the ideal room
temperature at the time you want. There are
several switching patterns available that can be
set to your specific needs. You can either rely
on the factory settings or make the settings that
suit your personal needs.
Set the clock
Press the TIME button
Adjust clock to current time
using the UP-DOWN button
Leave for 5 seconds to set.
1
Set day of the week
Press the WEEKDAY button
Adjust to current day of week
using the UP-DOWN button
M=1, T=2, W=3, TH=4, FR=5, SA=6, SU=7
Leave for 5 seconds to set.
2
Set heating temperature
This sets the normal temperature that
you would like your HotWire system to be
set at.
Press the SUN button
Adjust to required temperature
using the UP-DOWN button
Leave for 5 seconds to set.
3
Set minimum heating temperature
This setting determines the minimum temperature
you would like your floor to be.
i.e. Setting the temperature at which Hotwire will
activate.
Press the MOON button
Adjust to required temperature
using the UP-DOWN button
Leave for 5 seconds to set.
NOTE: This can be set to OFF.
Press the MOON button
Set to 5 degrees
Hold down the 'DOWN' button for 4 seconds until
the word 'OFF' appears.
4
To turn Hotwire on
If you find that you are cold and want to
turn the heating on, simply move the
slider to “Normal”.
If you want to turn it off again simply
move the slider back to “Energy Saving”
5
SLIDER
WEEKDAY
TIME
PROGRAM
SUN: NORMAL
ENTER
UP-DOWN
SIEMENS RDE20.1
MOON: ENERGY SAVING
Quick Start Up Guide
To set daily times
Move front SLIDER to the position shown.
Press the PROGRAM button.
Time setting starts from 00:00 in the morning.
00:00
1
Press the “Energy Saving” button for the
Economy Heating or OFF periods.
Keep pressing the button to increase the time.
Press the “Normal” button for the ON periods.
Keep pressing button to increase ON time.
The screen will look like this for the following
times:
If you make a mistake press the Program
button and start again.
When Day 1 is programmed press the
“Enter” button.
The Thermostat will move to day 2.
Program all 7 days then press the program
button to exit programming.
Note: To review your programming press the
program button.
Press the weekday button to review the
different days.
0 6 12 18 24
1Economy Heating of OFF 00:00 to 06:00
Heating ON 06:00 to 10:00
Economy Heating or OFF 10:00 to 18:00
Heating ON 18:00 to 22:00
SLIDER
WEEKDAY
TIME
PROGRAM
SUN: NORMAL
ENTER
UP-DOWN
SIEMENS RDE20.1
MOON: ENERGY SAVING
Other HotWire Thermostat manuals
HotWire
HotWire HWGL2 User manual
HotWire
HotWire HWTH1 User manual
HotWire
HotWire TR8100 DUAL Control User manual
HotWire
HotWire HWGL2 User manual
HotWire
HotWire TR8100V User manual
HotWire
HotWire HWGL1 User manual
HotWire
HotWire HWSMWiFil User manual
HotWire
HotWire TR8100V User manual
HotWire
HotWire Wireless Glass TR8100V User manual
HotWire
HotWire HWTH1 User manual
Popular Thermostat manuals by other brands
Saswell
Saswell SAS920XWHB-7-S-RF User manual and warranty card
Aircalo
Aircalo TFP1-ET85P2 operating manual
Honeywell
Honeywell CM721 user manual
Carrier
Carrier DEBONAIR 33CS Installation and operating instructions
Lennox
Lennox iHarmony Zone Thermostat Installation and setup guide
Gemtech
Gemtech GT7000 Operation
