Honeywell INNCOM E528.4G User manual

This manual suits for next models

1

Table of contents

Other Honeywell Thermostat manuals

Honeywell

Honeywell RTH6350 Series User manual

Honeywell

Honeywell SimpleSaver User manual

Honeywell

Honeywell LYRIC T4M Instruction Manual

Honeywell

Honeywell CT55N User manual

Honeywell

Honeywell FocusPRO TH6320R01 User manual

Honeywell

Honeywell Q682 User manual

Honeywell

Honeywell TH8320ZW1000 User manual

Honeywell

Honeywell Zio TR70 User manual

Honeywell

Honeywell FocusPRO TH6110D User manual

Honeywell

Honeywell T498A User manual

Honeywell

Honeywell VVT User manual

Honeywell

Honeywell ST9400A User manual

Honeywell

Honeywell CM707 User manual

Honeywell

Honeywell Tradeline T8400B1000 Quick start guide

Honeywell

Honeywell RLV310 User manual

Honeywell

Honeywell AQUASTAT L6188A User manual

Honeywell

Honeywell T6360 User manual

Honeywell

Honeywell CMR707A1049 User manual

Honeywell

Honeywell MagicStat CT3300 Technical specifications

Honeywell

Honeywell CM927 User manual

Honeywell

Honeywell RTH2310 User manual

Honeywell

Honeywell ATC928G3000 Instruction Manual

Honeywell

Honeywell Lyric T6 User manual

Honeywell

Honeywell T7200 User manual

Popular Thermostat manuals by other brands

EWELLY

EWELLY EW-181 manual

Prolon

Prolon T1100 Hardware guide

Computherm

Computherm Q20 operating instructions

Heatmiser

Heatmiser neoStat user manual

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA user manual

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat user manual

Saswell

Saswell SAS920XWHB-7-S-RF User manual and warranty card

Aircalo

Aircalo TFP1-ET85P2 operating manual

Carrier

Carrier DEBONAIR 33CS Installation and operating instructions

Lennox

Lennox iHarmony Zone Thermostat Installation and setup guide

Gemtech

Gemtech GT7000 Operation

Rollei

Rollei Smartes 45000 manual

Sinope

Sinope TH1300RF user guide

NuTone

NuTone NTBZ48 Installation & operation guide

Stelpro

Stelpro MAESTRO ASMT402AD user guide

Aube Technologies

Aube Technologies TH305 owner's guide

Powtier Controls

Powtier Controls 505MST instruction manual

Kanmor

Kanmor Zone Control 369e manual

Page 1 - Set RID, PAN ID and RF Channel in E528.4G and E527.4G

Set Room ID, PAN ID and RF Channel in INNCOM

E528.4G and E527.4G Thermostats

Enter Service Mode

Service mode is accessed by executing the following button sequence:

1. Press and hold F/C.

2. Press and release OFF/AUTO.

3. Press and release DISPLAY.

4. Release F/C.

The LCD display will now read “rid” confirming that you are in service mode.

Set Room ID

A unique 5-digit Room ID is required in each INNCOM thermostat.

Enter Service Mode and follow the procedure below to set the Room ID of the thermostat.

1. Scroll to rId

2. Press DISPLAY button and the current Room ID will scroll on the display.

3. After the Room ID scrolls, the highest digit of the Room ID will be displayed with the

HI fan indicator. Use the up or down arrow buttons to change the value and press

OFF/AUTO.

4. The next 2 digits of the Room ID are now displayed along with the MED fan indicator.

Use the up or down arrow buttons to change the value and press OFF/AUTO.

5. The last 2 digits of the Room ID are now displayed along with the LO fan indicator

Use the up or down arrow buttons to change the value and press OFF/AUTO.

6. Press the DISPLAY button to store the new Room ID. The new Room ID will scroll

across the display.

Example of RID for Room 515 (00515)

Page 2 - Set RID, PAN ID and RF Channel in E528.4G and E527.4G

Set PAN ID

PAN ID is the Personal Area Network ID of the thermostat. The PAN ID is used in networked

systems where the PAN ID of the thermostat must match the PAN ID of the router it is

assigned to.

Enter service mode and follow the procedure below to set the PAN ID in the thermostat

1. In Service Mode, go to PAn and press DISPLAY to view the value.

2. Change the displayed value to the assigned PAN ID and press the DISPLAY button to

set. The thermostat will beep to indicate the value has been entered.

Set RF Channel

The RF channel is used for both in-room RF communication and RF network

communication. In most cases the default RF channel of 26 will be used. In networked

systems, the RF channel in the thermostat must match the RF channel in the router it is

assigned to.

Enter service mode and follow the procedure below to set the RF Channel in the thermostat

1. In Service Mode, go to rf and press DISPLAY to view the value.

2. Change the displayed value to the assigned RF channel and press the DISPLAY

button to set. The thermostat will beep to indicate the value has been entered.

Exit Service Mode

Press F/C to exit service mode. You may need to press F/C multiple times to fully exit

from submenus within service mode.