Honeywell FMC2000 User manual
User Guide
FMC2000
FCC Information
The enclosed device complies with part 15 of the FCC rules.
Operation is subject to the following conditions: (1) This device
may not cause harmful interference, and (2) This device must
accept any interference received, including interference that
may cause undesired operation.
Proper Product Disposal At End Of Life
This symbol (crossed-out wheeled bin) indicates
separate collection of waste electrical and electronic
equipment in the EU countries.
This product may contain one or more lead-acid, Nickel-
metal hydride (NiMH), Lithium-ion, or Alkaline
batteries. Specific battery information is given in this
user guide.
Batteries must be recycled or disposed of properly.
At the end of its life, this product must undergo separate collection
and recycling from general or household waste. Please use the return
and collection system available in your country for the disposal of this
product.
© Copyright 2014 Honeywell Analytics
FMC2000 User’s Guide
Contents
1Special Notes.................................................................. 6
Warnings......................................................................... 7
2Standard Contents........................................................... 8
3General Information ....................................................... 8
3.1 Key Features............................................................... 8
4Physical Description....................................................... 9
4.1 Rear View and Side View Of Enclosure.................. 10
4.2 Mounting the FMC2000........................................... 10
4.3 Drilling Chart............................................................ 12
5Specifications ............................................................... 13
6Charging The Internal Backup Battery......................... 14
6.1 Clock Battery............................................................ 14
6.2 Data Protection While Power Is Off......................... 14
6.3 SD Card .................................................................... 14
7User Interface ............................................................... 16
7.1 Status LEDs.............................................................. 17
7.2 Display...................................................................... 17
7.3 Keypad...................................................................... 18
7.4 Alarms ...................................................................... 18
7.5 Preparing The FMC2000 For Data Storage ................. 19
8Operating The FMC2000 ............................................. 22
8.1 Turning The FMC2000 On....................................... 22
8.2 Turning The FMC2000 Off...................................... 24
9Display Information...................................................... 25
9.1 Display Icons............................................................ 26
10 Navigation .................................................................... 28
11 Normal Operation Mode Controls................................ 29
11.1 Radio Silent (Enable/Disable).................................. 29
11.2 Reset ......................................................................... 29
11.3 Silence Alarm........................................................... 30
11.4 Check (Alarm Details).............................................. 31
11.5 Monitoring................................................................ 33
11.5.1 Detail Info.............................................................. 33
11.5.2 MeshGuard EC Or LEL......................................... 34
1
FMC2000 User’s Guide
11.5.3 MeshGuard Router ................................................ 36
12 Configuration................................................................ 37
13 General Settings Menu ................................................. 38
13.1 Basic Settings ........................................................... 39
13.2 Date Format.............................................................. 40
13.3 Date........................................................................... 40
13.4 Time Format............................................................. 41
13.5 Time.......................................................................... 41
13.6 Language .................................................................. 43
13.7 Backlight................................................................... 43
13.8 Instrument Location.................................................. 44
13.9 Serial Number........................................................... 44
13.10 Firmware Version................................................. 44
13.11 Build Date............................................................. 44
13.12 Build Time............................................................ 44
14 Advanced Settings........................................................ 45
14.1 Basic Password......................................................... 45
14.2 Advanced Password.................................................. 46
14.3 Online Monitors........................................................ 46
14.4 Delete Monitors Configuration................................. 47
14.5 Delete Relay Configuration...................................... 47
14.6 EchoView ................................................................. 47
14.7 Alarm Buzzer............................................................ 47
14.8 Alarm Light .............................................................. 48
14.9 Backup Configuration .............................................. 48
14.10 Restore Configuration .......................................... 48
14.11 Factory Reset........................................................ 49
15 Wireless Detector Settings ........................................... 49
15.1 Modem ID ................................................................ 50
15.2 Location.................................................................... 50
15.3 Data Interval............................................................. 50
15.4 Sensor Type.............................................................. 51
15.5 Unit........................................................................... 51
15.6 Low........................................................................... 51
15.7 High.......................................................................... 51
15.8 STEL......................................................................... 51
2
FMC2000 User’s Guide
15.9 TWA......................................................................... 52
15.10 Full Scale.............................................................. 52
15.11 Drift ...................................................................... 52
15.12 Reset LEL............................................................. 52
16 Relay Settings............................................................... 53
16.1 Relay Ratings (Resistive) ......................................... 53
16.2 Type.......................................................................... 54
16.3 DON ......................................................................... 54
16.4 DOF.......................................................................... 55
16.5 Lock.......................................................................... 55
16.6 Vote .......................................................................... 56
16.7 Num.......................................................................... 57
16.8 Slave ID.................................................................... 57
17 Datalog Settings Menu ................................................. 58
17.1 Datalog ..................................................................... 58
17.2 Log Interval .............................................................. 59
17.3 Log Method .............................................................. 59
17.4 SD Card Info............................................................. 60
18 Communications Menu ................................................ 61
18.1 Wireless Modem....................................................... 62
18.1.1 Form a Network..................................................... 62
18.1.2 Radio Synch........................................................... 62
18.1.3 Radio PanID .......................................................... 63
18.1.4 Del Binding ........................................................... 64
18.1.5 Channel.................................................................. 64
18.1.6 Ping Network......................................................... 64
18.2 Ethernet Network...................................................... 65
18.2.1 TCPIP Enable........................................................ 65
18.2.2 Protocol Select....................................................... 66
18.2.3 Server IP................................................................ 67
18.2.4 Server Port............................................................. 67
18.2.5 Client IP................................................................. 67
18.2.6 Subnet Mask.......................................................... 68
18.2.7 Dflt Gateway ......................................................... 68
18.2.8 Re-Obtain IP.......................................................... 69
18.2.9 Client MAC........................................................... 69
3
FMC2000 User’s Guide
18.3 RS485....................................................................... 70
18.3.1 Baud Rate .............................................................. 70
18.3.2 Client ID................................................................ 71
18.3.3 MB Type................................................................ 71
18.3.4 Protocol.................................................................. 72
18.3.5 Monitor Address.................................................... 72
19 Diagnostic Menu .......................................................... 73
19.1 Relay Output Diagnostic .......................................... 73
20 Transferring Data From The SD Card.......................... 75
21 After Transferring Data From The SD Card ................ 77
22 Maintenance ................................................................. 79
22.1 Battery Charging & Replacement ............................ 79
22.2 SD Card Replacement .............................................. 79
22.3 Special Servicing Note ............................................. 80
23 Troubleshooting............................................................ 81
24 Technical Support......................................................... 83
25 Honeywell Analytics Contacts ..................................... 84
26 Appendix A: Wiring The FMC2000 ............................ 86
26.1 DC Wiring................................................................ 86
26.2 AC wiring................................................................. 86
27 Appendix B: Wiring To External Alarms .................... 91
27.1 Wiring Blocks In The FMC2000......................................88
27.2 Relay Electrical Drawing ......................................... 89
27.3 Checking Relay Continuity ...................................... 90
27.3.1 Power Supply Connections.................................... 91
27.3.2 Dry Contact Operation .......................................... 92
28 Appendix C: Connecting RS485 (Modbus) ................. 92
29 Appendix D: Connecting Ethernet ............................... 93
30 Appendix E: Connecting to a Light/Alarm Bar............ 94
31 Appendix F: Formatting An SD Card For FAT32 ....... 95
31.1 Formatting An SD card ............................................ 95
32 Appendix G: ModBus Protocol For The FMC2000... 101
32.1 Overview ................................................................ 101
32.2 Communications Settings....................................... 101
32.3 Message Frame/Communication Procedure........... 102
32.4 Registers Table....................................................... 103
4
FMC2000 User’s Guide
Read Before Operating
This manual must be carefully read by all individuals who have or
will have the responsibility of using, maintaining, or servicing this
product. The product will perform as designed only if it is used,
maintained, and serviced in accordance with the manufacturer’s
instructions. The user should understand how to set the correct
parameters and interpret the obtained results.
CAUTION!
To reduce the risk of electric shock, turn the power off before
opening this instrument or performing service. Never operate the
instrument when the instrument is open. Use and service this
product only in an area known to be non-hazardous.
5
FMC2000 User’s Guide
1 Special Notes
If the battery backup is completely discharged, the power
switch must be turned off and on when the main power is
restored.
An SD card is required for storing datalog information. If the
card is not factory formatted for FAT32, it must be formatted
before use. See Appendix C.
The FMC2000 must be properly grounded. Follow local
electrical codes when installing and using. Connect a ground
wire to the bolt inside the front panel to ground the chassis:
6
FMC2000 User’s Guide
WARNINGS
Use only in non-hazardous locations.
For safety reasons, this equipment must be operated and serviced
by qualified personnel only. Read and understand instruction
manual completely before operating or servicing.
AVERTISSEMENT
Utiliser uniquement en zone non-dangereuse.
Pour des raisons de sécurité, cet équipment doit être utilisé,
entretenu et réparé uniquement par un personnel qualifié. Étudier
le manuel d’instructions en entier avant d’utiliser, d’entretenir ou
de réparer l’équipement.
7
FMC2000 User’s Guide
2 Standard Contents
•Controller mounting plate (as specified)
•Key for cabinet lock
•SD memory card
•Installation guide/quick-start guide
•CD-ROM with User’s Guide, Quick-Start Guide, and
related materials
3 General Information
The FMC2000 Multi Controller works with provided by
Honeywell Analytics Mesh wireless detectors, such as
MeshGuard, RAETag, RAEWATCH, for various safety
applications.
3.1 Key Features
• Rapid deployment.
• Wireless mesh network communication.
• 5.7″high-contrast graphic LCD display. Good for outdoor
applications.
• Integrated visual indicator and audio alarm.
• 5 SPDT relays for alarms and fault.
• Datalogging storage on SD card.
• Configuration storage/retrieval on SD card.
• Can manage up to 24 wireless monitors.
• User programmable.
• Wide power input range: 100V to 240VAC
8
Table of contents
Other Honeywell Radio manuals
Honeywell
Honeywell XYR 5000 Series User manual
Honeywell
Honeywell BENDIX/KING KTR 2280 User guide
Honeywell
Honeywell KTR 2280A User manual
Honeywell
Honeywell ISA100 Gen X User manual
Honeywell
Honeywell Howard Leight Worksafe Radio 2 User manual
Honeywell
Honeywell Peha D 20.485.02 Radio User manual
Honeywell
Honeywell EchoView User manual
Honeywell
Honeywell ISM BAND XYR 5000 LINE User manual
