Honeywell Galaxy Mk7 User manual

Galaxy Mk7 Keypad Installation Instructions

1. Remove the keypad from its packaging.

2. To fix the keypad to the wall, the back plate must firstly be removed from the front plate. To do this,

insert a suitable tool into the opening at the bottom of the keypad and twist gently.

Warning: When the keypad is separated ensure that anti-static precautions are taken with the

keypad PCB to avoid damage from ESD.

3. Using the back plate as a template, mark the locations for the three fixing screws in the required

position.

4. If using a wall run cable for the keypad(A, B, +12V, 0V) position the cable behind the back plate, in

the cable channels provided. The cable can be run in from either the top or the bottom of the back

plate. Use a sharp tool to remove the plastic from the top or the bottom of the cable guides on the

back plate skirting.

5. Ensuring that the keypad wiring is fed through the large opening on the keypad back plate, position

the keypad base on the wall and fix securely using three No. 6 Pan Head screws1.

6. If an off the wall tamper is required, using a No. 6 Pan Head screw, secure the sacrificial wall

tamper, indicated in figure 1, to the wall, ensuring that the tamper knockout indicated, is still

connected to the back plate moulding.

7. Connect theA, B and power wires to the correct terminals of the removable, four way connector

block.

8. Ensuring that the power is disconnected set the keypad to a unique address using the 16 way rotary

switch on the PCB.

Figure 1 : Galaxy Mk7 Keypad Front and Back Plates

Back Plate

Fixing Holes Sacrificial

Wall

Tamper

Cable Guide

RS485 Connector Opening

Keypad

Door

Fixing Clips

9. To re-assemble the keypad, connect the four way connector block onto the pins on the keypad

PCB.Attach the keypad front plate to the back plate by inserting the two clips on the top of the

keypad front plate into the two apertures at the top of the keypad back plate, then gently push the

bottom of the keypad front plate into the back plate until it snaps securely into place.

10. Keypad part number CP037 has a volume control pot marked VOL at the bottom right-hand

corner of the pcb. To adjust the volume, open up the keypad cover and adjust the pot (+ or -).

NOTE: The keypad door can be re-orientated to allow opening from either the left or right hand sides.

However, it should be noted that fitting or removal of the door should only be done when the front

plate is detached from the back plate.Attempted removal or insertion, of the door, when the keypad

is assembled may cause damage to the keypad mouldings.

NOTE : 1Use of screws other than No. 6 Pan head may damage the keypad mouldings.

EN50131 Compliance

This product is suitable for use in systems designed to comply with PD6662:2004 and

prEN50131-1:2004

Security Grade - 3

Environmental Class - II

This product is suitable for use in systems designed to comply with EN50131-1:1997

Security Grade - 2

Environmental Class - II

Honeywell Security

2 Redwood Crescent

Peel Park Campus

East Kilbride

G74 5PA

II1-0200 Rev 2.1 © Copyright Honeywell Security

Table of contents

Other Honeywell Keypad manuals

Honeywell

Honeywell ADEMCO 6160RF User manual

Honeywell

Honeywell 6150 - Ademco Fixed - Display Keypad Assembly instructions

Honeywell

Honeywell Ademco 6150V User manual

Honeywell

Honeywell 6270 - Ademco TouchCenter Keypad User manual

Honeywell

Honeywell 6150 - Ademco Fixed - Display Keypad Assembly instructions

Honeywell

Honeywell ADEMCO 6160RF User manual

Honeywell

Honeywell ADEMCO 5828V User manual

Honeywell

Honeywell LKPES8M-EN User manual

Honeywell

Honeywell Ademco 6160PX Assembly instructions

Honeywell

Honeywell EKZ017200C User manual

Honeywell

Honeywell ADEMCO 6152 Assembly instructions

Honeywell

Honeywell ADEMCO 5828 Assembly instructions

Honeywell

Honeywell ADEMCO 5828 User manual

Honeywell

Honeywell 6160PX User manual

Honeywell

Honeywell ADEMCO 6162 User manual

Honeywell

Honeywell 6280 Series User manual

Honeywell

Honeywell 6271C - Ademco TouchCenter Color Keypad User manual

Honeywell

Honeywell Ademco 6151 Assembly instructions

Honeywell

Honeywell 6150 - Ademco Fixed - Display Keypad Assembly instructions

Honeywell

Honeywell ADEMCO 6160RF Assembly instructions

Honeywell

Honeywell 6150 - Ademco Fixed - Display Keypad Assembly instructions

Honeywell

Honeywell ADEMCO 6271CV User manual

Honeywell

Honeywell SEC-H-INT-KP User manual

Honeywell

Honeywell 6280 Series User manual

Popular Keypad manuals by other brands

BFT

BFT SELETTO Installation and user manual

Micro Id

Micro Id MP7G3BL Quick start manual

WindowMaster

WindowMaster WLI 130 installation instructions

ACT

ACT ACT PRO 1030 manual

Cardin

Cardin SSB Series manual

Harman Kardon

Harman Kardon KP 1 Specifications

Chamberlain

Chamberlain KPR2000 Installation setup manual

CYP

CYP CR-KP1 Operation manual

Aeware

Aeware k-35 Series Quick reference card

Aritech

Aritech CS-175 Series user guide

GE NetworX NX-1600E Series user manual

Lenze AC Tech

Lenze AC Tech MC SERIES installation instructions

Burg Wächter

Burg Wächter secuENTRY 7711 operating instructions

Aeware

Aeware in.k450 Tech book

Lenze

Lenze EPM-H410 operating instructions

Toshiba

Toshiba RKP007Z user manual

Gemini

Gemini GEM-DXK1 KEYPAD operating guide

Russound

Russound MDK-C5 User and installation manual