Honeywell Dolphin 75e User manual

Dolphin™ 75e

Quick Start Guide

75E-AN6-EN-QS Rev A

5/16

Out of the Box

Make sure that your shipping box contains these items:

• Dolphin 75e handheld computer (terminal)

• 1GB, 2GB, or 4GB industrial grade microSD™ card (optional)

• Rechargeable 3.7V Li-ion battery

• USB charge/communication cable

• Power adapter with regional plug adapters

• Product documentation

If you ordered accessories for your terminal, verify that they are also included

with the order. Be sure to keep the original packaging in case you need to

return the 75e for service.

Memory Card Specifications

Honeywell recommends the use of Single Level Cell (SLC) industrial grade

microSD or microSDHC™ memory cards with Dolphin terminals for

maximum performance and durability. Contact a Honeywell sales

representative for additional information on qualified memory card options.

Dolphin 75e Features

Right Scan

Button

USB Door /

Micro USB

Port

Recent Apps

Button

Menu Button Home Button

Back Button

Scan Status LED

Front Speaker

Touch Panel

Battery Status / Notification LED

Microphone

Scan Button

Bottom Speaker

Camera Flash / Flashlight

Camera Lens

I/O Connector

Battery Door

(standard model shown)

Volume Buttons

Left Scan Button

Power Button

Audio Jack

Image Engine Window (LED aperture)

Battery

Door Lock

Memory Card Socket

Memory Card Retention Flap

Battery Latch

(battery and battery door not shown)

Install the Battery

Dolphin 75e models are designed for use with battery part numbers

BAT-STANDARD-02 (Li-ion 3.7 V, 6.179 watt hour) and BAT-EXTENDED-02

(Li-ion 3.7 V, 12.358 watt hour), manufactured for Honeywell International

Inc.

The Dolphin 75e is shipped with the battery packaged separately from the

terminal. Perform the steps illustrated below to install the battery.

Ensure all components are dry prior to placing the battery in the

terminal. Mating wet components may cause damage not covered by

the warranty.

We recommend use of Honeywell Li-ion battery packs. Use of any non-

Honeywell battery may result in damage not covered by the warranty.

Note: Standard model battery

and battery door shown.

Apply pressure to the

edges of the battery door

before engaging the lock

to ensure the door is

properly closed.

Charge the Dolphin 75e

Dolphin terminals ship with the battery significantly discharged of power.

Charge the battery with a Dolphin charging device for a minimum of 4 hours

for the standard battery or 6 hours for the extended battery.

When using the 70e-USB Charge/Communication cable to charge from a

500mA USB port on a host device, charge the battery for a minimum of

6 hours for the standard battery or 8 hours for the extended battery.

Factors that Affect Charge Times

• Using the terminal while charging the battery increases the time required

to reach a full charge.

• If the terminal is drawing more current than supplied by the charging

source, charging will not take place. For additional information, see the

user's guide.

We recommend use of Honeywell peripherals, power cables, and power

adapters. Use of any non-Honeywell peripherals, cables, or power

adapters may cause damage not covered by the warranty.

Dolphin 75e model terminals are designed for use with the following charging

devices and cables: 70e-HB, 70e-EHB, 70e-CB, 70e-NB, 70e-MB, 70e-MC,

and the 70e-USB ADAPTERKIT.

Ensure all components are dry prior to mating terminals/batteries with

peripheral devices. Mating wet components may cause damage not

covered by the warranty.

HomeBase (Model 70e-HB)

The 70e-HB charger is designed for use with Dolphin 75e model terminals,

and battery part numbers BAT-STANDARD-02 (Li-ion 3.7V, 6.179 watt hour)

and BAT-EXTENDED-02 (Li-ion 3.7V, 12.358 watt hour), manufactured for

Honeywell International Inc.

Use only a UL Listed power supply that has been qualified by Honeywell with

output rated at 12VDC and 3 amps with the device.

HomeBase Parts

HomeBase LED Indicators

AUX battery LED

Orange The auxiliary battery is charging.

Green The auxiliary battery has completed charging and is ready

for use.

Dock LED

Blue The terminal is properly seated in the base.

COMM LED

Green A USB connection is established with the host workstation.

AUX Battery Well

AUX

Battery LED

COMM LED

Dock LED

AC Power Cord

USB Port

DC Power

Jack

Power Adapter

Power Cable

USB Charge/Communication Cable (70e-USB ADAPTERKIT)

The USB Charge/Communication cable provides two options for charging

the terminal. Use the cable in conjunction with the provided power supply

adapter and plug adapter to charge the terminal from a power outlet or

connect the cable to a high-power USB port to charge from a host device.

Option 1: Charging from a power outlet

Use only a UL Listed power supply that has been qualified by Honeywell with

an output rated at 5VDC and 1A with the device.

Option 2: Charging from a USB port on a host device

For important information about charging, see “Factors that Affect Charge

Times”.

Power

Adapter

Micro USB Port

USB Door

Plug Adapter 70e-USB Charge/

Communication Cable

Micro USB

Port

USB

Door

Host Device

USB Port

70e-USB Charge/

Communication Cable

Turn Power On/Off

To turn the terminal On, press and release the Power button .

To turn the terminal Off:

1. Press and hold the Power button until the options menu appears.

2. Touch Power off.

Note: You should always power off the terminal before removing the battery.

Sleep Mode (Suspend Mode)

Sleep mode automatically turns the touch panel display off and locks the

terminal to save battery power when the terminal is inactive for a

programmed period of time.

1. Press and release the Power button to wake the terminal.

2. Swipe up from the lock or press the Menu button to unlock the

terminal.

To adjust the time out limit, touch All Apps > Settings > Display >

Sleep.

Turn Airplane Mode On/Off

1. Swipe down from the top of the touch screen to open the notifications

panel.

2. Swipe down again to access the quick settings.

3. Touch Airplane mode to toggle the mode On or Off.

Note: When Airplane Mode is turned On, shows on the status bar.

Remove the Battery

1. Power Off the terminal.

2. Perform the steps illustrated below to remove the battery.

Install a Memory Card

Note: Format microSD/SDHC card before initial use.

1. Power Off the terminal.

2. Unlock and remove the

battery door.

3. Pull the battery latch back

and remove the battery.

4. Lift the card retention flap.

5. Slide the card (contacts facing

down) into the socket, and

then close the retention flap.

6. Install the battery and

battery door, and then

engage the lock.

7. Press the Power button .

Other manuals for Dolphin 75e

Table of contents

Other Honeywell Handheld manuals

Honeywell

Honeywell Dolphin CN85 User manual

Honeywell

Honeywell HX2 User manual

Honeywell

Honeywell Marathon User manual

Honeywell

Honeywell ScanPal EDA51 User manual

Honeywell

Honeywell Dolphin 75e User manual

Honeywell

Honeywell MX9 User manual

Honeywell

Honeywell Dolphin 6110 User manual

Honeywell

Honeywell Dolphin 99 EX User manual

Honeywell

Honeywell DOLPHIN 6500 User manual

Honeywell

Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin... User manual

Honeywell

Honeywell CN75 User manual

Honeywell

Honeywell DOLPHIN 6500 User manual

Honeywell

Honeywell Dolphin CT60 NI User manual

Honeywell

Honeywell MX7 Tecton User manual

Honeywell

Honeywell MX3PLUS User manual

Honeywell

Honeywell Dolphin 75e User manual

Honeywell

Honeywell 9900LUP-6211G0 - Hand Held Products Dolphin... User manual

Honeywell

Honeywell VM242A BasicMes-2 User manual

Honeywell

Honeywell HX2 User manual

Honeywell

Honeywell Dolphin 6000 User manual

Honeywell

Honeywell Dolphin 6000 User manual

Honeywell

Honeywell Dolphin 9900 User manual

Honeywell

Honeywell Dolphin 7900 User manual

Honeywell

Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin... User manual

Popular Handheld manuals by other brands

MiTAC

MiTAC Mio 168 user manual

Wasp

Wasp WDT92 user manual

Texas Instruments

Texas Instruments TI-Nspire user guide

AXEM Technology

AXEM Technology MBS user guide

Armstrong

Armstrong Brain Wave Hardware & software installation

Unitech

Unitech TB128 user manual

Symbol

Symbol MC9000-G Product reference guide

Unitech

Unitech HT1 1D Batch user manual

Ingenico

Ingenico IWL220 GPRS Quick reference guide

Intermec

Intermec CK61 user manual

Symbol

Symbol c2000 user manual

Symbol

Symbol MC18 Product reference guide

Acer

Acer n20 manual

Intermec

Intermec CK61 quick start guide

Docomo

Docomo F-04H instruction manual

Toshiba

Toshiba e350 Series user manual

Palm

Palm Tungsten E2 supplementary guide

Alien

Alien ALR-H460 user guide