Honeywell Dolphin 75e User manual

Dolphin™ 75e

with Windows® Embedded 8.1 Handheld

Quick Start Guide

75E-H81-ENUS-QS Rev C

6/15

Out of the Box

Verify that your carton contains the following items:

• Dolphin 75e handheld computer (terminal)

• 1GB, 2GB, or 4GB industrial grade microSD™ card (optional)

• Rechargeable 3.7V Li-ion battery

• USB charge/communication cable

• Power adapter with regional plug adapters

• Product documentation

If you ordered accessories for your terminal, verify that they are also included

with the order. Be sure to keep the original packaging in case you need to

return the Dolphin terminal for service.

Memory Card Specifications

Honeywell recommends the use of Single Level Cell (SLC) industrial grade

microSD or microSDHC™ memory cards with Dolphin terminals for maxi-

mum performance and durability. Contact a Honeywell sales representative

for additional information on qualified memory card options.

Getting to Know the Dolphin 75e

Front

Microphone

Scan Button

Battery Charging Status and

General Notification LED

Right Scan/

Image Button

USB Door/

Micro USB

Port

Start Button

Administrator

or Developer

Definable Button

Back Button

Search,

Cortana® or

Bing®Access

Scan Status

Notification LED

Front Speaker

Touch Panel

Display

Bottom Speaker

Camera Flash/Flashlight

Color Camera

Lens

I/O Connector

Battery Door

(standard model shown)

Volume Control Button

Left Scan/Image Button

Power Button

Audio Jack

Image Engine Window (LED aperture)

Battery

Door Lock

Memory Card Socket

Memory Card Retention Flap

Battery Latch

(battery and battery door not shown)

NFC SIM Card Socket

NFC SIM Card Retention Flap

Installing the Battery

Dolphin 75e models are designed for use with battery part numbers

BAT-STANDARD-02 (Li-ion 3.7 V, 6.179 watt hour) and BAT-EXTENDED-02

(Li-ion 3.7 V, 12.358 watt hour), manufactured for Honeywell International

Inc.

The Dolphin 75e is shipped with the battery packaged separately from the

terminal. Perform the steps illustrated below to install the battery.

Ensure all components are dry prior to placing the battery in the

terminal. Mating wet components may cause damage not covered by

the warranty.

We recommend use of Honeywell Li-ion battery packs. Use of any non-

Honeywell battery may result in damage not covered by the warranty.

Note: Standard model battery and

battery door shown.

Apply pressure to the

edges of the battery door

before engaging the lock

to ensure the door is

properly closed.

Charging the Dolphin 75e

Dolphin terminals ship with the battery significantly discharged of power.

Charge the battery with a Dolphin charging device for a minimum of 4 hours

for the standard battery and 6 hours for the extended battery. When using

the 70e-USB Charge/Communication cable to charge from a 500mA USB

port on a host device, charge the battery for a minimum of 6 hours for the

standard battery and 8 hours for the extended battery.

Note: Using the terminal while charging the battery significantly increases the

time required to reach a full charge.

We recommend use of Honeywell peripherals, power cables, and power

adapters. Use of any non-Honeywell peripherals, cables, or power

adapters may cause damage not covered by the warranty.

Dolphin 75e model terminals are designed for use with the following charging

devices and cables: 70e-HB, 70e-EHB, 70e-CB, 70e-NB, 70e-MB, 70e-MC,

and the 70e-USB ADAPTERKIT.

Ensure all components are dry prior to mating terminals/batteries with

peripheral devices. Mating wet components may cause damage not

covered by the warranty.

HomeBase (Model 70e-HB)

The 70e-HB charger is designed for use with Dolphin 75e model terminals,

and battery part numbers BAT-STANDARD-02 (Li-ion 3.7V, 6.179 watt hour)

and BAT-EXTENDED-02 (Li-ion 3.7V, 12.358 watt hour) manufactured for

Honeywell International Inc.

Use only a UL Listed power supply, which has been qualified by Honeywell

with output rated at 12VDC and 3 amps with the device.

HomeBase Parts

HomeBase LED Indicators

AUX battery LED

Orange The auxiliary battery is charging.

Green The auxiliary battery has completed charging and is ready

for use.

Dock LED

Blue The terminal is properly seated in the base.

COMM LED

Green A USB connection is established with the host workstation.

AUX Battery Well

AUX

Battery LED

COMM LED

Dock LED

AC Power Cord

USB Port

DC Power

Jack

Power Adapter

Power Cable

USB Charge/Communication Cable (70e-USB ADAPTERKIT)

The USB Charge/Communication cable provides two options for charging

the terminal. Use the cable in conjunction with the provided power supply

adapter and plug adapter to charge the terminal from a power outlet or con-

nect the cable to a high-power USB port to charge from a host device.

Option 1: Charging from a power outlet

Use only a UL Listed power supply, which has been qualified by Honeywell

with an output rated at 5VDC and 1A with the device.

Option 2: Charging from a high-power USB port on a host device

Note: Charging the battery through a USB port takes more time than direct

AC adapter charging. USB charging will not take place if the terminal is

drawing more current than supplied by the USB port. Refer to the user's

guide for additional information.

Touch Settings > USB. Check the box next to “Notify me when I

connect to a slower charger”.

Power

Adapter

Micro

USB Port

USB Door

Plug Adapter

70e-USB Charge/

Communication Cable

Micro USB

Port

USB

Door

Host Device

USB Port

70e-USB Charge/

Communication Cable

First Time Power Up Instructions

To learn how to use a custom provisional XML file during initial power up to

configure the terminal, see the user’s guide available for download from

www.honyewllaidc.com. To learn more about creating custom provisioning

XML files, see the Administrator Guide for Windows Embedded 8.1

Handheld, available from Microsoft at https://technet.microsoft.com.

To get started quickly without using a custom provisioning XML file, use one

of the options below.

Option 1: Scan the quick start bar code.

1. Press the Power button .

2. Select a language, and then next from the Welcome screen.

3. Point the terminal at the bar code below. Press the Scan button.

On a successful scan, the terminal beeps twice and “configuration

received” appears under the Barcode option on the screen.

Note: For optimum performance, avoid reflections by scanning the bar

code at a slight angle.

4. Touch next. “Configuration in progress” appears on the screen. When

the terminal is done booting, the Start screen appears.

Option 2: Use the Consumer setup option.

1. Press the Power button .

2. Select a language, and then next from the Welcome screen.

3. On the Set up your Handheld screen, touch and hold the right edge of the

screen until the scroll bar appears (thin gray vertical line). Swipe up until

you see More Options.

4. Touch More Options.

5. Select Consumer setup. The terminal reboots and then displays the

Welcome back screen.

6. Select next.

7. On the Connect to Wi-Fi screen, select a Wi-Fi network from the

available network list. Enter the appropriate security credentials, and

then select done.

8. Select either recommended or custom from the Set up your Handheld

screen.

9. Follow the on screen prompts for setting up the terminal and creating a

Microsoft® account (optional).

To learn more about what you can do with a Microsoft account, go to

www.windowsphone.com.

Aiming Beam

The aiming beam is narrower when you hold the terminal closer to a bar

code and the aiming beam is wider when you hold it farther from the bar

code.

The aiming beam must be aimed closer to symbologies that have smaller

bars or elements (mil size). The aiming beam must be aimed farther from

symbologies that have larger bars or elements (mil size).

Linear Bar Code

2D Matrix Symbol

Other manuals for Dolphin 75e

Table of contents

Other Honeywell Handheld manuals

Honeywell

Honeywell Dolphin CT40 User manual

Honeywell

Honeywell CT45 Series User manual

Honeywell

Honeywell Dolphin 9500 Series User manual

Honeywell

Honeywell Dolphin 70e Black User manual

Honeywell

Honeywell ScanPal 5100 User manual

Honeywell

Honeywell Dolphin 7600 User manual

Honeywell

Honeywell 7900L0P-422C20E - Hand Held Products Dolphin... User manual

Honeywell

Honeywell ScanPal EDA50K User manual

Honeywell

Honeywell Dolphin CN85 User manual

Honeywell

Honeywell SP5700 User manual

Honeywell

Honeywell HX2 User manual

Honeywell

Honeywell Dolphin 75e User manual

Honeywell

Honeywell DOLPHIN 6100 User manual

Honeywell

Honeywell ScanPal EDA50 User manual

Honeywell

Honeywell ScanPal EDA51 User manual

Honeywell

Honeywell EDA50K-0 User manual

Honeywell

Honeywell Dolphin 6000 User manual

Honeywell

Honeywell Dolphin 75e User manual

Honeywell

Honeywell Dolphin CN85 User manual

Honeywell

Honeywell 7600BG-122-B4EE - Hand Held Products Dolphin... User manual

Honeywell

Honeywell CT50 User manual

Honeywell

Honeywell 8680i Series User manual

Honeywell

Honeywell Dolphin 6000 User manual

Honeywell

Honeywell Dolphin 6000 User manual

Popular Handheld manuals by other brands

MiTAC

MiTAC Mio 168 user manual

Wasp

Wasp WDT92 user manual

Texas Instruments

Texas Instruments TI-Nspire user guide

AXEM Technology

AXEM Technology MBS user guide

Armstrong

Armstrong Brain Wave Hardware & software installation

Unitech

Unitech TB128 user manual

Symbol

Symbol MC9000-G Product reference guide

Unitech

Unitech HT1 1D Batch user manual

Ingenico

Ingenico IWL220 GPRS Quick reference guide

Intermec

Intermec CK61 user manual

Symbol

Symbol c2000 user manual

Symbol

Symbol MC18 Product reference guide

Acer

Acer n20 manual

Intermec

Intermec CK61 quick start guide

Docomo

Docomo F-04H instruction manual

Toshiba

Toshiba e350 Series user manual

Palm

Palm Tungsten E2 supplementary guide

Alien

Alien ALR-H460 user guide