Honeywell THOR VM1 User manual

Thor VM1 Field Replaceable Front Panel

The front panel of the Thor VM1 is field replaceable. The front panel assembly contains the keyboard, touchscreen and optional

defroster. Should any of these components fail, the front panel assembly can easily be replaced to minimize downtime. The replacement

front panel is available in several configurations.

Requirements - User Supplied

• Torquing tool capable of measuring inch pounds

• #2 Phillips screwdriver bit

Replacing Front Panel

1. If the Thor VM1 has a Windows CE operating system, place the Thor VM1 in Suspend by pressing the Power button on the front of

the Thor VM1. If the Thor VM1 has a Windows Embedded Standard operating system, select Shut Down from the Windows Shut

Down menu.

2. Remove the Thor VM1 from the Quick Mount Smart Dock by pulling

down on the red quick release handle, lifting the bottom of the Thor VM1

away from the dock, and lifting the Thor VM1 up and away from the

dock.

3. Place the Thor VM1 face down on a clean, well lit stable surface.

4. Use a #2 Phillips bit to loosen the captive M3 screws

on the tethered access panel with the SIM label.

SIM Label

5. Remove the tethered access panel from the opening and press the UPS battery disconnect button located

just below the SIM card installation slot.

6. Reinstall the access panel cover. Torque the M3 screws to 4-5 inch pounds using a #2 Phillips bit.

7. Turn the Thor VM1 face up.

8. Use a #2 Phillips bit to loosen the fourteen (14) captive

M3 screws that hold on the front panel.

9. Carefully lift the front panel away from the device.

11 12

13 14

10. Position the replacement front panel so the tab on the back of the front panel lines up with the slot on the Thor VM1. Be sure the two

wiring connectors are also aligned.

11. Gently press the front panel into place.

12. Tighten the fourteen (14) captive M3 screws in the order shown in the figure for step 8 above. Use a #2 Phillips bit and torque the

screws to 6-7 inch pounds.

13. Reinstall the Thor VM1 in the dock. When the Thor VM1 is placed in the powered dock, the UPS battery automatically reconnects.

14. Press the Power button on the front of the Thor VM1.

15. The Thor VM1 automatically recognizes any change in keyboard configuration.

16. If the Thor VM1 has a Windows CE operating system and the defroster configuration has changed, use the Test button on the

Peripherals control panel to update the Thor VM1's configuration. Select Start > Settings > Control Panel > Peripherals and tap

the Test button.

17. The Thor VM1 is ready for use.

Thor VM1 with Front Panel Removed Back of Thor VM1 Front Panel

Slot Wiring Connector

TabWiring Connector

Other manuals for THOR VM1

Table of contents

Other Honeywell Control Panel manuals

Honeywell

Honeywell Notifier RP-2001 User manual

Honeywell

Honeywell Gent Viglion EN54 Installation and operation manual

Honeywell

Honeywell W834A User manual

Honeywell

Honeywell Galaxy 2 Series User manual

Honeywell

Honeywell Notifier AFP-100 User manual

Honeywell

Honeywell Excel 5000 System Series User manual

Honeywell

Honeywell SLC User manual

Honeywell

Honeywell Pro-Watch 7000 User manual

Honeywell

Honeywell NOTIFIER NFW-100X User manual

Honeywell

Honeywell SMX-AUS User manual

Honeywell

Honeywell Domonial CMI 800++ User guide

Honeywell

Honeywell Galaxy Dimension GD-48 User manual

Honeywell

Honeywell Farenhyt Series User manual

Honeywell

Honeywell LYNX Touch 5100 Instruction Manual

Honeywell

Honeywell NOTIFIER NFW-100X User manual

Honeywell

Honeywell AQUATROL AQ25142B Guide

Honeywell

Honeywell IFP-75 User manual

Honeywell

Honeywell LT-32 User manual

Honeywell

Honeywell ControLinks YP7999A1000 User manual

Honeywell

Honeywell GX-Series Assembly instructions

Honeywell

Honeywell NOTIFIER AM1000 Owner's manual

Honeywell

Honeywell VARIODYN D1 Comprio Technical manual

Honeywell

Honeywell NOTIFIER AM1000 User manual

Honeywell

Honeywell IFP-2100ECS Technical specifications

Popular Control Panel manuals by other brands

RDZ

RDZ PC-HRX user manual

STG-BEIKIRCH

STG-BEIKIRCH MZ3 operation instruction

Efka

Efka Variocontrol V810 instruction manual

Cebora

Cebora 208-10 instruction manual

AMX

AMX AutoPatch CP-15 instruction manual

Satel

Satel CA-6 KLED-S user manual

Evolution

Evolution IQ plus 800 installation manual

Fagor

Fagor 8040 TCO CNC operating manual

Trane

Trane ComfortLink II XL950 Control user guide

AKO

AKO PROCool AKO-17635-2 quick guide

ABB

ABB 6136/30M-101 operating instructions

Telikou

Telikou BK-603 Belt Pack instruction manual

Mapei

Mapei Mapeheat Thermo Touch user guide

Bosch

Bosch D9412GV4 owner's manual

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 user manual

Sminn

Sminn BOX L VF1L EI instruction manual

Balboa

Balboa TP600 user manual

Nice

Nice HSCU1 Instructions and warnings for installation and use