Honeywell 8670 User manual

8670 Wireless Ring Scanner

Quick Start Guide

Aller à www.honeywellaidc.com pour le français.

Vai a www.honeywellaidc.com per l'italiano.

Gehe zu www.honeywellaidc.com für Deutsch.

Ir a www.honeywellaidc.com para español.

Para Português, acesse www.honeywellaidc.com.br.

Перейти на русскоязычный сайт www.honeywellaidc.com.

查看繁体版请登陆 www.honeywellaidc.com

한글 www.honeywellaidc.com 로이동합니다 .

ʤʱʸʢʬʺʩʸʡʲʡʺʡʥʺʫʡʨʰʸʨʰʩʠʤʸʺʠʬʸʥʡʲwww.honeywellaidc.com.

Rev C

7/16

Ring Scanner Overview

Scan

Window

Trigger

Optional C-ring

in small and

large sizes to

replace ring

strap

Ring Strap

Bluetooth™

module

Solid blue LED

indicates you are

connected via

Bluetooth.

Note: The battery must be fully charged before the first use. The

8650 8-Bay Battery Charger must be purchased separately.

Trigger Rotation

Attach Ring to Finger

1. Remove the shipping film from the ring scanner window.

2. Slide your finger into the loosened ring strap.

3. Pull the ring strap to secure the ring to your finger.

Note: If using the C-ring, simply slide it on to your finger.

Left Hand Right Hand

Scanner head can

be rotated 180°



Shipping

film

Change Ring Strap to C-Ring

1. Turn the ring scanner 90°.

2. Press the latch down.

3. Remove the ring strap.

4. Reverse these directions to attach the C-ring.

Replace the Battery

If the LED on the ring scanner flashes red, it indicates the battery is

low. To replace the battery, push the button and slide the lock to

open the battery compartment on the Bluetooth™ module and

remove the battery.

Replace the battery in the compartment, aligning the yellow dots on

the battery and compartment, then slide the lock closed.

Wear the Ring Scanner

The ring cable should not cross under your hand.

Right handed - wear battery

module so Honeywell name is

facing toward you

Left handed - wear battery module

so Honeywell name is facing away

from you

Wrist Position When Scanning

Incorrect Incorrect

Correct

Warning: Do not stare directly into the laser beam.

How to Scan a Bar Code

1D bar codes 2D bar codes

Pair the Ring Scanner

The ring scanner can be used with Bluetooth devices, Honeywell

mobile computers, Honeywell vehicle mount computers, Honeywell

communication bases and Access Points.

Pair with a Bluetooth Device Using a HID Keyboard

The 8670 ring scanner can pair with host Bluetooth devices

such as personal computers, laptops, tablets, and Apple®

devices.

1. Scan the Bluetooth HID Keyboard Connect bar code

below.

2. Set your host device so it searches for other Bluetooth

devices. (Refer to your host device’s User’s Guide for pair-

ing instructions.)

3. Once your host device has located the scanner, select the

8670 ring scanner name from the list displayed.

Note: Select the serial number that is shown on the ring

scanner, not on the battery module.

4. Some host devices will automatically pair with the ring

scanner. If your host device automatically pairs with the

ring scanner, it displays a successful pairing message and

you do not need to continue to the next step.

5. Some PDT hosts display a prompt for a PIN. Ignore this

message.

6. If your host device does not automatically pair with the ring

scanner, a PIN is displayed. This PIN must be scanned

within 60 seconds. Using the ring scanner, you must

quickly scan Bluetooth PIN Code below, then scan the

numeric bar code(s) for the PIN code from the

Programming Chart, then scan the Save bar code.

Bluetooth HID Keyboard Connect

Bluetooth PIN Code

When the ring scanner pairs with a host, the LED on the top of

the ring scanner flashes green and the LED on the Bluetooth

module remains solid blue. Your host device should now be

paired with the ring scanner and be able to accept incoming

data from the 8670.

Use the On-Screen Keyboard

If you have paired with an Apple device, the on-screen key-

board is activated by pressing the ring scanner trigger

twice, quickly. If you have paired with an Android device (v

4.4 and higher), the on-screen keyboard must be config-

ured by going to Settings - Language & input. Tap on

Default and change the setting for Hardware Physical

keyboard to Off.

Disconnect from Host

Once your ring scanner has been connected to a host, you

must disconnect it in order to communicate with a different

device. Scan the Bluetooth HID Keyboard Disconnect bar

code to unlink the ring scanner from the currently linked host.

Pair with a Bluetooth Serial Port - PCs/Laptops

The 8670 ring scanner can pair with a Bluetooth serial port on a

PC or laptop.

1. Scan the Non-Base BT Connection bar code below.

Bluetooth HID Keyboard Disconnect

Non-Base BT Connection

2. Set your host device so it searches for other Bluetooth

devices. (Refer to your host device’s User’s Guide for pair-

ing instructions.)

3. Once your host device has located the scanner, select the

8670 ring scanner name from the list displayed.

Note: Select the serial number that is shown on the ring

scanner, not on the battery module.

4. If a PIN is requested, enter 1234 (the default).

When the ring scanner pairs with the serial port of the host, the

LED on the top of the ring scanner flashes green and the LED

on the Bluetooth module remains solid blue. Your host device

should now be paired with the ring scanner and be able to

accept incoming data from the 8670.

Pair with a Honeywell Mobile Computer

The 8670 ring scanner can pair with Honeywell mobile comput-

ers such as the Dolphin 70e or 75e. (For Tecton mobile com-

puters, see Pair with a Honeywell Vehicle Mount Computer

instructions that follow.)

Other manuals for 8670

Table of contents

Honeywell 8670 User manual

Popular Barcode Reader manuals by other brands