Honeywell F58F User manual

OWNER’S GUIDE Honeywell

F58F

ELECTRONIC

AIR CLEANER

All Rights R s rv d 69-0977B-1

69-0977B—1

C O NTE NTS

PAGE

THE AIR CLEANER MON ITO R 2

O PERATING YO U R ELECTRO NIC AIR CLEANER 3

G ETTING THE M O ST FROM YO UR ELECTRONIC AIR CLEANER 5

CLEANING THE CELLS AND PREFILTERS 7

HO ELECTRO NIC AIR CLEANING O RK S 13

BEFO RE YOU CALL FOR SE RVIC E 18

CLEAN CO IL G U ARANTEE 20

PER FE CT CLIMATE® CO NTR OLS 22

AR RA NTY 23

169-0977B— 1

AIR C LEANER M ONITOR

The optional 8600F Air Cleaner

Monitor may be added to your air

cleaner system to provide convenient

indication of system performance. The

8600F must be ordered seperately.

The 8600F is designed to mount next

to your thermostat, or in any convenient

location (such as a utility room) where it

can be seen as it monitors the air

cleaner's performance.

The four Liquid Crystal Display (LCD)

indicators are labeled ON, BATTERY,

SERVIC E and FAULT.

• The ON indicator is active during

normal air cleaning operation. The system fan is also on when the air

cleaner is running.

• The BATTERY indicator is active when the 8600F battery is low.

• The SER VIC E indicator is active when it is time to wash the air

cleaner prefilters and cells. The time between cleanings is entered

into the 8600F at installation. To turn the SE RVICE indicator off,

press the Reset button located at the bottom right of the 8600F.

• The FAULT indicator is active when there is extreme dirt loading,

electronic malfunction, constant arcing or other problems with the

high voltage output of the air cleaner power supply.

69-0977B—1 2

OPERATING YOUR ELECTRONIC AIR CLEANER

Set the O N -O FF switch in the power box to ON.

NOTE: Depress 1 for ON, 0 for OFF.

The air cleaner will now operate whenever your

furnace/air conditioning system fan operates. For

maximum air cleaning benefit and cleaner air

conditioner coils, leave the air cleaner switch ON

at all times and the fan switch on your thermostat

ON. Of course, continuous fan operation will add

to your electric bill each month.

hen the fan and air cleaner come on, the neon

indicator lights.

If your air cleaner is equipped with a wall-

mounted 8600F Air Cleaner Monitor (see page

2), the ON indicator will be active whenever the

air cleaner is in operation. Of course, the system

fan will also be running.

You may hear a snapping (electrical arcing)

sound occasionally as the air cleaner operates.

This usually is caused by a larger dust particle

causing a high voltage discharge. The snapping

sound means that your air cleaner is working as it

should. To hear the snapping sound, momentarily

press the test button near the bottom of the door.

Use the test button any time you want to prove

air cleaner operation.

M3585

hen the fan and air cleaner stops, the neon

light goes out, as does the ON indicator on the

8600F. The air cleaner is off until the heating or

air conditioning and fan start again.

369-0977B— 1

Sir

M3583

If you don t want the air cleaner to run, set the

O N-O FF switch to O FF to turn off the air cleaner.

Your furnace and air conditioner will still operate

normally, but without the added benefit of air

cleaning. Normally, this switch should be ON at

all times.

69-0977B—1 4

GETTING THE MOST FROM YOUR ELECTRONIC AIR CLEANER

Run the electronic

air cleaner as

much as possible

Keep the cells

and prefilters

clean

Replace any

activated carbon

filters in the

d uc tw o rk

regularly

For greatest benefit, the air cleaner should run

all the time. To do this, set the fan switch on

your thermostat to ON, and make sure the air

cleaner is switched ON. The fan and air cleaner

will run even when the furnace or air conditioner

is off.

NOTE: A manual fan switch may be built into

the furnace or furnace fan controller.

The air cleaner uses less power than a 40 watt

light bulb (two-cell model— 33 watts; single cell

model— 22 watts). The cost of running the

system fan will vary with the size of your fan

motor and the cost of electricity where you live.

Most air cleaner owners feel that the added cost

is more than offset by the added benefits of full

time air cleaning and full time air circulation.

You may feel that the room temperature stays

more even when the fan is always on.

Although the air cleaner is designed to be

efficient over a wide range of cell dirt loading

conditions, regular cleaning is your best

assurance of consistent performance. Also, a

very dirty cell and prefilter reduces air flow and,

in turn, reduces the efficiency of the furnace or

air conditioner. The cell wash reminder sched

ule or the optional 8600F Air Cleaner Monitor

should be used to maintain a regular wash

schedule.

An activated carbon (charcoal) filter is some

times installed downstream of the air cleaner to

help control odors. This filter should be changed

at least annually, or as recommended by the

filter manufacturer. Honeywell does not offer

carbon filters for this application.

569-0977B— 1

If you have a

hum idifier If your system includes an atomizing humidifier,

you may want to install a standard furnace filter

between the humidifier and the air cleaner. This

filter would keep the humidifier spray's mineral

deposits from collecting on the air cleaner. This

filter should be checked regularly and changed

when it shows signs of mineral or dirt buildup. If

you do not install a filter, you will probably need

to wash the cells and prefilters more often to

remove the mineral buildup.

If an ultrasonic room humidifier is used often,

especially if filled with tap (undistilled) water, the

cell(s) and prefilter(s) will require more frequent

washing. A white residue will accumulate on the

cell(s) from the minerals in the water. This

residue may also contribute to "white dust"

(see p. 17).

All Honeywell whole house humidifiers may be

used in a system with the Honeywell Electronic

Air Cleaner without any additional filters or

system modification.

69-0977B—1 6

CLEANING THE CELLS AN D PREFILTERS

A CAUTION

Sharp edges.

Can cause personal injury.

Carefully handle the cell(s) or wear protective

gloves to avoid cuts from the sharp metal

edges.

Setting a To ensure optimum performance from the air

regular cleaning cleaner, the cells and prefilters must be

schedule cleaned regularly— every one to six months.

ashing frequency will vary depending on the

number of family members, pets, activities

(such as cooking or woodshop) and smoking

habits. Use the wash reminder schedule that

cam e with the air cleaner or the optional

8600F Air Cleaner Monitor to help establish

and maintain a regular cleaning schedule.

Mount the wash reminder schedule in a

convenient location.

ELECT

AID

INSTALLA

YEAR

RON

E-ME

TION D

IC A

MOI

)ATE/D

IR C

RE D

ATE D I

LEAN

E LA

NSTAL

\IER

\VA(

LATION

3E F

i/;

H Rl

LTR

EMIN

E EL

DER

ECT

SCH

RON

-----

—

HEDU

IQUE

M F98 2

769-0977B— 1

If your air cleaner has a 8600F Air Cleaner

Monitor, the SER VIC E indicator will activate

when it is time to wash the cells and prefilters.

ash them following the instructions starting on

page 9. To turn the S ER VIC E indicator off,

press the reset button on the lower right of the

8600F (see picture below).

You may consider washing your cells and

prefilters before the SE RV ICE indicator

activates if some activity in your home has

changed. This can include, but is not limited to

the following:

• Have the windows been open more often?

• Has someone been smoking more often?

• Has someone taken up a dust producing

hobby?

If this activity change is permanent, you may

want your installer to change the ASH

schedule that was entered into the 8600F

when it was installed.

69-0977B—1 8

Other manuals for F58F

Table of contents

Languages:

Other Honeywell Air Cleaner manuals

Honeywell

Honeywell HFD-110 - QuietClean Tower Air Purifier User manual

Honeywell

Honeywell F58G Operation manual

Honeywell

Honeywell F52C User manual

Honeywell

Honeywell HPA100WE User manual

Honeywell

Honeywell 2450Cm Series User manual

Honeywell

Honeywell F50F User manual

Honeywell

Honeywell HPA075 Series User manual

Honeywell

Honeywell UC100A1005 User manual

Honeywell

Honeywell HFD-010 - Room Air Purifier User manual

Honeywell

Honeywell Enviracaire 50150 Series User manual

Honeywell

Honeywell F58G Operation manual

Honeywell

Honeywell InSight Series User manual

Honeywell

Honeywell QUIETCLEAN HFD230 Series User manual

Honeywell

Honeywell eenviracaire 51130 Series User manual

Honeywell

Honeywell enviracaire 18150 Series User manual

Honeywell

Honeywell HPA600 series Installation instructions

Honeywell

Honeywell F111 Series 3 Operation manual

Honeywell

Honeywell F50F User manual

Honeywell

Honeywell F111U Operation manual

Honeywell

Honeywell F35F Operation manual

Honeywell

Honeywell INSIGHT HPA080 Series User manual

Honeywell

Honeywell 16200 - Consumer Products - Room Air... User manual

Honeywell

Honeywell 60001 - Enviracaire Grade Air Purifier User manual

Honeywell

Honeywell HPA250B Series User manual

Popular Air Cleaner manuals by other brands

IKEA

IKEA UPPÅTVIND quick start guide

Nash

Nash AP-1 PureSmart instruction manual

LG PH-U450 Series owner's manual

DeLonghi

DeLonghi DDSX 220WFA manual

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E instruction manual

Sharp

Sharp FU-40SE Operation manual

Philips

Philips AC2721 user manual

Hitachi

Hitachi EP-A3000 instruction manual

TruSens

TruSens Z-2000 manual

Motorola

Motorola MBP87SN quick start guide

Beko

Beko ATP 7100I instruction manual

Carrier

Carrier INFINITY 1620 installation instructions

AtmosAir

AtmosAir P2002 user guide

Winix

Winix NK300 Use & care guide

Friedrich

Friedrich C-90A Service information

Surgically Clean Air

Surgically Clean Air JADE2.0 Operation manual

Base aire

Base aire 555 Pro Installation & operation manual

Champion

Champion CP25 instructions