Honeywell E3Point User manual

E3Point

Moniteur de gaz à distance

Remote Gas Sensor

Manuel d’utilisation

User Manual

Gas detection device

E3Point Remote

Gas Sensor

User Manual

1998M0773

5/09

E3Point Remote Gas Sensor User Manual i

Symbol Definitions

The following table lists the symbols used in this document to denote

certain conditions:

Symbol Deﬁnition

ATTENTION: Identiﬁes information that

requires special consideration.

TIP: Identiﬁes advice or hints for the user,

often in terms of performing a task.

REFERENCE _ INTERNAL: Identiﬁes an

additional source of information within the

bookset.

CAUTION

Indicates a situation which, if not avoided,

may result in equipment or work (data) on the

system being damaged or lost, or may result

in the inability to properly operate the process.

CAUTION: Indicates a potentially hazardous

situation which, if not avoided, may result in

minor or moderate injury. It may also be used

to alert against unsafe practices.

CAUTION: Symbol on the equipment refers

the user to the product manual for additional

information. The symbol appears next to

required information in the manual.

WARNING: Indicates a potentially hazardous

situation which, if not avoided, can result in

serious injury or death.

WARNING symbol on the equipment refers

the user to the product manual for additional

information. The symbol appears next to

required information in the manual.

ii E

3Point Remote Gas Sensor User Manual

E3Point Remote Gas Sensor User Manual iii

Table of Contents

Symbol Definitions...............................................................i

Introduction..........................................................................1

Description.....................................................................................1

Safety Information ....................................................................1

Installation............................................................................2

Sensor Locations ...........................................................................2

Installation Height ..........................................................................3

Mounting ........................................................................................4

Wiring Diagram ....................................................................5

Connecting Main Sensor to Remote .............................................5

Specifications ......................................................................7

Detection Ranges and Alarm Levels..............................................7

Sensor Overload ............................................................................7

Standard Parts List ........................................................................8

Periodic Inspection and Maintenance ............................................9

Maintenance.............................................................................9

Sensor Life Span......................................................................9

Table of Contents

iv E

3Point Remote Gas Sensor User Manual

E3Point Remote Gas Sensor User Manual 1

Introduction

Description

The E3Point Remote Sensor is a toxic or combustible gas detection

sensor that is compatible with the E3Point Standalone sensor or with

the features offered in certain controller type products, such as the

301C. It provides continuous monitoring for one of the following gases

in ambient air: CO, H2S, O2, NO2, and combustible hazards.

The E3Point is designed to be mounted on an extra wide (2 3/8”)

electrical box.

The E3Point Remote Sensor is intended for use exclusively with the

E3Point Standalone unit. No other uses are supported by Honeywell

Analytics.

Safety Information

Users of the E3Point Remote Sensor require a full understanding of

the installation, operating, and maintenance instructions, otherwise

protection provided by the monitor may be impaired. Read the

following warnings before using the monitor.

WARNING:

Install according to local electrical regulations and codes.•

Installationshouldbeperformedbyqualiedpersonnel.•

Do not paint over the sensor screen.•

Ensure the sensor screen is free of dirt and debris.•

Ensure the sensor screen is not covered.•

Do not expose the monitor to electrical shock and/or continuous•

mechanical shock.

Do not expose the sensor to high pressure water spray.•

Do not use the monitor if it is damaged. Before use inspect the•

monitor. Look for cracks, missing metals, or plastics. If the monitor

is damaged, contact Honeywell Analytics immediately.

The warranty will be voided if the customer or any unauthorized•

service personnel attempts to repair the unit.

Installation

Sensor Locations

2 E3Point Remote Gas Sensor User Manual

Installation

Sensor Locations

The following suggestions should be considered to assure detection

of the target gas. Select the most suitable location for each sensor.

Air Currents: If there are fans, wind, or other sources of air

movement, gases may tend to rise or collect in certain areas of a

facility. The local air currents should be assessed to aid in selecting

the sensor location. Air convection can often be more important in

determining gas concentration areas than factors of Vapor Density.

Gas Emission Sources: As a rule, at least one sensor should be

located in close proximity to each point where an emission is likely to

occur.

Caution: Because each sensor can only “report” what it is

detecting at the moment, it is very important that the sensor be located

where leaks are most likely to occur.

Other manuals for E3Point

Table of contents

Languages:

Other Honeywell Accessories manuals

Honeywell

Honeywell DC515SP2 User manual

Honeywell

Honeywell RCW100N User manual

Honeywell

Honeywell RPWL301A User manual

Honeywell

Honeywell Sensepoint HT User manual

Honeywell

Honeywell DC315 series User manual

Honeywell

Honeywell SiXCT User manual

Honeywell

Honeywell SiX Series User manual

Honeywell

Honeywell DC311 Series User manual

Honeywell

Honeywell IS-310 User manual

Honeywell

Honeywell RPW316A Manual

Honeywell

Honeywell RPW203A User guide

Honeywell

Honeywell Notifier NFSTI-SMT2 User manual

Honeywell

Honeywell IAQPoint2 User manual

Honeywell

Honeywell DC515 Series User manual

Honeywell

Honeywell ADEMCO 5821 Quick start guide

Honeywell

Honeywell QuadBand Triple IR FS24X User manual

Honeywell

Honeywell MyChime RCA2200N User manual

Honeywell

Honeywell H7012A Series User manual

Honeywell

Honeywell NAHA003WK01 User manual

Honeywell

Honeywell SK-FIRE-CO-W User manual

Honeywell

Honeywell DC315 Series User manual

Honeywell

Honeywell Fire-Lite Alarms AD365 User manual

Honeywell

Honeywell MPD Series User manual

Honeywell

Honeywell TC846E1005 User manual

Popular Accessories manuals by other brands

Hillco

Hillco 2810 Operator's manual

Siemens

Siemens QSA2700D Basic documentation

Contours

Contours ZY024 manual

Saivod

Saivod VS621 manual

Virtuox

Virtuox VirtuCLEAN 2.0 user manual

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS user manual

Z-Wave

Z-Wave HSD-200Z user manual

turck

turck FMX-IM-2UPLI63FX quick start guide

Decagon Devices

Decagon Devices 10HS manual

UPPAbaby

UPPAbaby Cup Holder user manual

Elko

Elko SmartSensor Leakage Wireless manual

Grizzly

Grizzly H8371 instructions

Panasonic

Panasonic HG-T Series user manual

IFM Electronic

IFM Electronic Efector 250 Series Brief instructions

DigiDesign

DigiDesign 888/24 I/O installation guide

PROZIS

PROZIS QUAY user manual

patagonia

patagonia PSI Vest user manual

SFC Energy

SFC Energy EFOY GO! manual