Home Decorators Collection 91144 User manual

USE AND CARE GUIDE

PALM COVE 44-INCH CEILING FAN

Item #1002 507 993

Model #91144

UL Model #EF200S(K)-44

Questions, problems, missing parts? Before returning to the store,

call Home Decorators Collection Customer Service

8 a.m. - 6 p.m., EST, Monday-Friday.

1-800-986-3460

HOMEDEPOT.COM/HOMEDECORATORS

THANK YOU

We appreciate the trust and condence you have placed in Home Decorators Collection through the purchase of this ceiling fan. We strive

to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home

improvement needs. Thank you for choosing Home Decorators Collection!

Table of Contents ................................................................2

Safety Information...............................................................2

Warranty ............................................................................... 3

Pre-Installation ....................................................................3

Installation............................................................................6

Assembly..............................................................................7

Operation ...........................................................................15

Care and Cleaning.............................................................16

Troubleshooting.................................................................16

1. All wiring must be in accordance with the National Electrical

Code ANSI/NFPA 70 and local electrical codes. Electrical

installation should be performed by a qualied licensed

electrician.

2. The outlet box and support structure must be securely mounted

and capable of reliably supporting 35 pounds (15.9 kg). Use

only UL Listed outlet boxes marked “Acceptable for Fan

Support of 35 pounds (15.9 kg) or less.”

3. The fan must be mounted with a minimum of 7 ft (2.1 m)

clearance from the trailing edge of the blades to the oor.

4. Do not operate the reversing switch while the fan blades are

in motion. You must turn the fan off and stop the blades before

you reverse the blade direction.

5. Do not place objects in the path of the blades.

6. Electrical diagrams are for reference only. Light kits that are

not packed with the fan must be UL listed and marked suitable

for use with the model fan you are installing. Switches must be

UL General Use Switches. Refer to the instructions packaged

with the light kits and switches for proper assembly. Use 9.5W

max. LED bulbs (included).

7. After making electrical connections, spliced conductors should

be turned upward and pushed carefully up into the outlet box.

The wires should be spread apart with the grounded conductor

and the equipment-grounding conductor on one side of the

outlet box.

8. All setscrews must be checked and retightened where

necessary before installation.

9. Suitable for use in wet locations when installed in a GFCI

protected branch circuit. Use only with light kits marked

“Suitable for use in wet locations”

WARNING: To reduce the risk of personal injury,

do not bend the blade brackets (also referred to as

anges) during assembly or after installation. Do not

insert objects in the path of the blades.

WARNING: To reduce the risk of re or electric

shock, do not use this fan with any solid-state speed

control device.

WARNING: Remove the rubber motor stops on

the bottom of the fan before installing the blades or

testing the motor.

WARNING: To avoid possible electrical shock,

turn the electricity off at the main fuse box before

wiring. If you feel you do not have enough electrical

wiring knowledge or experience, contact a licensed

electrician.

Safety Information

Table of Contents

CAUTION: To reduce the risk of personal injury,

use only the screws provided with the outlet box.

CAUTION: To avoid personal injury or damage to the fan

and other items, use caution when working around or

cleaning the fan.

WARNING: To reduce the risk of re, electric shock

or personal injury, mount to outlet box marked

“acceptable for fan support of 35 lbs. (15.9 kg) or

less” and use screws provided with the outlet box.

READ AND SAVE THESE INSTRUCTIONS.

3HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Pre-Installation

Warranty

The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a

lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic

blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date

of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior

model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing

and reinstalling the product are your responsibility. Damage to any part such as by accident, misuse, improper installation, or by afxing any

accessories, is not covered by this warranty. Because of varying climatic conditions this warranty does not cover any changes in brass nish,

including rusting, pitting, corroding, tarnishing, or peeling. Brass nishes of this type give their longest useful life when protected from varying

weather conditions. A certain amount of “wobble” is normal and should not be considered a defect. Servicing performed by unauthorized persons

shall render the warranty invalid. There is no other express warranty. Home Decorators Collection hereby disclaims any and all warranties,

including but not limited to those of merchantability and tness for a particular purpose to the extent permitted by law. The duration of any

implied warranty which cannot be disclaimed is limited to the time period as specied in the express warranty. Some states do not allow a

limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental,

consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by

law. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you.

This warranty gives specic legal rights, and you may also have other rights which vary from state to state. This warranty supersedes all prior

warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer.

Contact the Customer Service Team at 1-800-986-3460 or visit www.HomeDepot.com/homedecorators.

SPECIFICATIONS

TOOLS REQUIRED

NOTE: These are approximate measures. They do not

include the Amps and Wattage used by the light kit.

Phillips

screwdriver

Flat blade

screwdriver

Adjustable

wrench

Electrical

tape

Wire

cutter

Step ladder

Size Speed Volts Amps Watts RPM CFM Net

Weight

Gross

Weight Cube Feet

44”

Low

Medium

High

120

0.22

0.38

0.51

10.74

29.17

62.47

130

181

1725

3119

4359

18.04 lbs.

(8.2 kg)

20.39 lbs.

(9.25 kg) 1.51’

Part Description Quantity

AA Rubber Gasket 1

BB Pull Chain Extensions 2

Part Description Quantity

CC Plastic Plug 1

DD Plastic Wire Connector 3

Pre-Installation (continued)

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

CC DD

5HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Part Description Quantity

ASlide-on mounting bracket

(inside canopy) 1

B Ball/downrod assembly 1

C Canopy 1

D Coupler cover 1

E Fan-motor assembly 1

Part Description Quantity

F Light kit tter assembly 1

G Blade 5

H Blade bracket 5

I LED bulb (9.5W Max.) 2

IMPORTANT: This product and/or components are

governed by one or more of the following U.S. Patents:

5,947,436; 5,988,580; 6,010,110; 6,046,416, 6,210,117

and other patents pending.

Pre-Installation (continued)

PACKAGE CONTENTS

Installation

MOUNTING OPTIONS

WARNING: To reduce the risk of re, electric shock

or personal injury, mount to outlet box marked

“Acceptable for fan support of 35 lbs. (15.9 Kg) or

less”, and use screws provided with the outlet box. An

outlet box commonly used for the support of lighting

xtures may not be acceptable for fan support and may

need to be replaced. If in doubt, consult a qualied

electrician.

If your ceiling fan does not have an existing UL-listed mounting

box, then install one using the following instructions:

□Disconnect the power by removing the fuses or turning off

the circuit breakers.

□Secure the outlet box directly to the building structure. Use

the appropriate fasteners and materials. The outlet box and

its bracing must be able to fully support the weight of the

moving fan (at least 35 lbs.). Do not use a plastic outlet box.

The illustrations below show three different ways to mount the

outlet box.

If the canopy touches the downrod, then remove the canopy bottom

cover, and turn the canopy 180° before attaching the canopy to the

mounting plate.

To hang your fan where there is an existing xture but no ceiling joist,

you may need an installation hanger bar as shown above

(available at any Home Depot store).

NOTE: You may need a longer downrod to maintain

proper blade clearance when installing on a steep, sloped

ceiling. The maximum angle allowable is 30° away from

horizontal.

Outlet Box

Recessed

Outlet

Box

Provide Strong

Support

Ceiling

Mounting

Plate

Outlet Box

Hanger Bar

7HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly - Standard Ceiling Mount

Routing the wires

Assembling the fan

Preparing for mounting

□Remove the mounting bracket (A) from the canopy (C) by

loosening the two canopy screws (JJ) located in the “L

shaped” slots.

□Remove and save the two canopy screws (HH) and lock

washers (WW) in the round holes. This will enable you to

remove the mounting bracket (A).

□Route the wires exiting the top of the fan motor (E) and

through the coupler cover (D).

□Make sure the slot openings are on top and route the

wires through the canopy (C) and then through the

ball/downrod assembly (B).

□Remove the setscrew (RR) by turning it counterclockwise.

□Install the downrod (B) by inserting it into the motor collar (TT),

and turning it clockwise until it is tight.

□Reinstall the setscrew (RR) turning clockwise until tight.

NOTE: This fan is equipped with a safety tab (SS). Should

the setscrew (RR) ever become loose while the fan is

running in reverse, the safety tab (SS) will engage and

stop the fan from falling.

CAUTION: To ensure wobble-free operation and to avoid

damage to the fan, the downrod (B) and the setscrew

(RR) must be completely tightened

Assembly - Close-To-Ceiling Mount

Assembly - Hanging the Fan

Attaching the fan to the electrical

box

□Pass the 120-Volt supply wires through the center hole in the

mounting bracket (A).

□Install the ceiling mounting bracket on the outlet box by sliding

the mounting bracket (A) over the two screws (II) provided with

the outlet box. If necessary, use leveling washers (not included)

between the mounting bracket (A) and the outlet box. Note that

the at side of the mounting bracket (A) is toward the outlet box.

When using close-to-ceiling mounting, it is important that the

mounting bracket be level.

□Securely tighten the two mounting screws (II).

WARNING: To reduce the risk of re, electric shock or personal

injury, mount to outlet box marked “Acceptable for fan support

of 35 lbs. (15.9 Kg) or less”, and use screws provided with the

outlet box.

IIII

Preparing for mounting Routing the wires

1 2

□Remove the mounting bracket (A) from the canopy (C) by

loosening the two canopy screws (JJ) located in the “L

shaped” slots

□Remove and save the two canopy screws (HH) and lock

washers (WW) in the round holes. This will enable you to

remove the mounting bracket (A).

□Remove the decorative canopy bottom cover (N) from the

canopy (C) by pressing the three studs located inside the

bottom of the canopy.

□Remove three of the six screws (KK) and lock washers (LL)

(every other one) securing the motor collar to the top of the

fan motor housing (E).

□Place the rubber gasket (AA) over the remaining three screws.

Make sure the slot opening is on top, then proceed to place

the ceiling canopy (C) over the collar at the top of the motor

(E).

□Align the mounting holes with the holes in the motor (E) and

fasten, using the three screws (KK) and lock washers (LL)

removed previously. Tighten the mounting screws securely.

9HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly - Hanging the Fan (continued)

Hanging the fan

Standard mount.

Close to ceiling mount.

□Carefully lift the fan-motor assembly (E) up to the slide-on

mounting bracket (A).

□Insert the ball portion of the ball/downrod assembly into the

socket of the slide-on mounting bracket.

□Turn the ball/downrod assembly clockwise until it is seated

with the tab of the slide-on mounting bracket aligned with the

slot in the ball.

□If using close-to-ceiling mounting, hang the fan on the hook

provided by utilizing one of the holes at the outer rim of the

ceiling canopy (C).

WARNING: The hook (XX) is only to balance the fan while

making the electrical connections. Failure to hang as shown

may result in the hook (XX) breaking, causing the fan to fall.

The hook must pass from the inside to the outside of the

canopy.

WARNING: When hanging the fan on the hook (XX) it is

critical that you use one of the non-slotted (round) holes in

the canopy (C).

Outlet box

in the ceiling

(NN)

Blue

Green or bare

DD (x3)

Black White

Green

Wiring the fan to the receiver

□The fan comes with 30 in. lead wires for use with an extended

ball/downrod assembly. If using the 4.5 in. ball/downrod

assembly (B) provided, you can cut the lead wires to your

desired length (no shorter than 12 in.) This will make extra

room in the canopy (C), if you do not wish to cut the wires,

you will need to neatly wrap them.

□Connect the fan motor green wire(s) to the household green

or bare wire using a wire connecting nut (DD).

□Connect the fan motor white wire to the household white wire

using a wire connecting nut (DD).

□Connect the fan motor black and blue wires to the household

black wire using a wire connecting nut (DD).

□Secure each wire connecting nut using electrical tape.

□Turn the wire connecting nut (DD) upward and push the wiring

into the outlet box (NN).

IMPORTANT: Use the wire connecting nuts (DD) supplied with your

fan. Secure the connectors with electrical tape and ensure there

are no loose strands or connections.

NOTE: The fan comes with 30 in. lead wires for use with an

extended ball/downrod assembly. If using the 4.5 in. ball/downrod

assembly (B) provided, you can cut the lead wires to your desired

length (no shorter than 12 in.).

WARNING: Remove the rubber motor stops on the bottom of the

fan before installing the blades or testing the motor.

Assembly - Hanging the Fan (continued)

This manual suits for next models

Table of contents

Languages:

Other Home Decorators Collection Fan manuals

Home Decorators Collection

Home Decorators Collection WINDWARD IV User manual

Home Decorators Collection

Home Decorators Collection WESLEY 1008624855 User manual

Home Decorators Collection

Home Decorators Collection EASTON N381B-BN User manual

Home Decorators Collection

Home Decorators Collection 56049 User manual

Home Decorators Collection

Home Decorators Collection Belaris User manual

Home Decorators Collection

Home Decorators Collection STATEWOOD 51770 User manual

Home Decorators Collection

Home Decorators Collection KINGSBROOK 60-KBR User manual

Home Decorators Collection

Home Decorators Collection HERITAGE POINT AM909-CB User manual

Home Decorators Collection

Home Decorators Collection FC140-BKRL User manual

Home Decorators Collection

Home Decorators Collection FC132-BMRL User manual

Home Decorators Collection

Home Decorators Collection HARRINGTON 59236 User manual

Home Decorators Collection

Home Decorators Collection 68-ATRDC User manual

Home Decorators Collection

Home Decorators Collection YG825A-BN User manual

Home Decorators Collection

Home Decorators Collection 34777-HBUG User manual

Home Decorators Collection

Home Decorators Collection KENSGROVE Series User manual

Home Decorators Collection

Home Decorators Collection YG583-BN User manual

Home Decorators Collection

Home Decorators Collection 51528 User manual

Home Decorators Collection

Home Decorators Collection 1003 823 898 User manual

Home Decorators Collection

Home Decorators Collection 56047 User manual

Home Decorators Collection

Home Decorators Collection YG658-BN User manual

Home Decorators Collection

Home Decorators Collection FAWNDALE 1005 819 911 User manual

Home Decorators Collection

Home Decorators Collection YG768A-MBK User manual

Home Decorators Collection

Home Decorators Collection GAMALI 60-FORY User manual

Home Decorators Collection

Home Decorators Collection RADLEY AM690-BN User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual