Home Decorators Collection 51576 User manual

USE AND CARE GUIDE

COSTNER 52-INCH CEILING FAN

Questions, problems, missing parts? Before returning to the store,

call Home Decorators Collection Customer Service

8 a.m. - 6 p.m., EST, Monday-Friday.

1-800-986-3460

HOMEDEPOT.COM/HOMEDECORATORS

THANK YOU

We appreciate the trust and condence you have placed in Home Decorators Collection through the purchase of this ceiling fan. We strive

to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home

improvement needs. Thank you for choosing Home Decorators Collection!

Item #1000 XX XXX

Model #51576

UL Model #52-RTY

Table of Contents ................................................................2

Safety Information...............................................................2

Warranty ............................................................................... 3

Pre-Installation ....................................................................3

Installation............................................................................6

Assembly..............................................................................7

Operation ...........................................................................11

Care and Cleaning.............................................................12

Troubleshooting.................................................................12

1. To reduce the risk of electric shock, ensure the electricity has

been turned off at the circuit breaker or fuse box before you

begin.

2. All wiring must be in accordance with the National Electrical

Code ANSI/NFPA 70-1999 and local electrical codes. Electrical

installation should be performed by a qualied licensed

electrician.

3. The outlet box and support structure must be securely mounted

and capable of reliably supporting 35 lbs. (15.9 kg). Use only UL

Listed outlet boxes marked “Acceptable for Fan Support of 35

lbs. (15.9 kg) or less.”

4. The fan must be mounted with a minimum of 7 ft (2 m) clearance

from the trailing edge of the blades to the oor.

5. Do not operate the reversing switch while the fan blades are in

motion. You must turn the fan off and stop the blades before

you reverse the blade direction.

6. Do not place objects in the path of the blades.

7. To avoid personal injury or damage to the fan and other items,

use caution when working around or cleaning the fan.

8. Electrical diagrams are for reference only. Light kits that are not

packed with the fan must be UL listed and marked suitable for

use with the model fan you are installing. Switches must be UL

General Use Switches. Refer to the instructions packaged with

the light kits and switches for proper assembly.

9. After making electrical connections, spliced conductors should

be turned upward and pushed carefully up into the outlet box.

The wires should be spread apart with the grounded conductor

and the equipment-grounding conductor on one side of the

outlet box.

10. All setscrews must be checked and retightened where

necessary before installation.

WARNING: To reduce the risk of personal injury,

do not bend the blade brackets (also referred to as

anges) during assembly or after installation. Do not

insert objects in the path of the blades.

WARNING: To reduce the risk of re or electric

shock, do not use this fan with any solid-state speed

control device.

WARNING: To avoid possible electrical shock,

turn the electricity off at the main fuse box before

wiring. If you feel you do not have enough electrical

wiring knowledge or experience, contact a licensed

electrician.

WARNING: Electrical diagrams are for reference

only. Optional use of any light kit shall be UL-listed

and marked suitable for use with this fan.

Safety Information

Table of Contents

CAUTION: To reduce the risk of personal injury,

use only the screws provided with the outlet box.

CAUTION: To avoid personal injury or damage to the fan

and other items, use caution when working around or

cleaning the fan.

WARNING: To reduce the risk of re, electric shock

or personal injury, mount to outlet box marked

“Acceptable for fan support of 35 lbs. (15.9 kg) or

less”, and use screws provided with the outlet box.

3HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Pre-Installation

Warranty

SPECIFICATIONS

TOOLS REQUIRED

NOTE: These are approximate measures. They do not

include the amps and wattage used by the light kit.

Phillips

screwdriver

Flat blade

screwdriver

Adjustable

wrench

Electrical

tape

Wire

cutter

Step ladder

Size Speed Volts Amps Watts RPM CFM Net

Weight

Gross

Weight Cube Feet

52 in.

Low

Medium-Low

Medium-High

High

120

0.2

0.31

0.39

0.48

130

165

2028

3003

3993

5035

19.84 lbs.

(9 kg)

22.71

(10.3 kg) 1.92 cu.ft.

The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a

lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic

blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date

of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior

model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing

and reinstalling the product are your responsibility. Damage to any part such as by accident, misuse, improper installation, or by afxing any

accessories, is not covered by this warranty. Because of varying climatic conditions this warranty does not cover any changes in brass nish,

including rusting, pitting, corroding, tarnishing, or peeling. Brass nishes of this type give their longest useful life when protected from varying

weather conditions. A certain amount of “wobble” is normal and should not be considered a defect. Servicing performed by unauthorized persons

shall render the warranty invalid. There is no other express warranty. Home Decorators Collection hereby disclaims any and all warranties,

including but not limited to those of merchantability and tness for a particular purpose to the extent permitted by law. The duration of any

implied warranty which cannot be disclaimed is limited to the time period as specied in the express warranty. Some states do not allow a

limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental,

consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by

law. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you.

This warranty gives specic legal rights, and you may also have other rights which vary from state to state. This warranty supersedes all prior

warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer.

Contact the Customer Service Team at 1-800-986-3460 or visit www.HomeDepot.com/homedecorators.

Part Description Quantity

AA Plastic wire connector 3

BB Extra blade bracket hardware

(screw and lockwasher)

Part Description Quantity

CC Plastic plug 1

DD Pull chain 2

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

AA BB DD

Pre-Installation (continued)

5HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Part Description Quantity

A Mounting plate 1

B Fan-motor assembly 1

C Motor housing 1

D Light kit tter assembly 1

Part Description Quantity

E Blade 5

F Blade bracket with pre-installed

screws

G Glass bowl with trim ring 1

H CFL bulbs, 14-Watt maximum 3

IMPORTANT: This product and/or components are

governed by one or more of the following U.S. Patents:

5,947,436; 5,988,580; 6,010,110; 6,046,416, 6,210,117

and other patents pending.

PACKAGE CONTENTS

Pre-Installation (continued)

Installation

MOUNTING OPTIONS

WARNING: To reduce the risk of re, electric shock or

personal injury, mount to outlet box marked “Acceptable

for fan support of 35 lbs. (15.9 kg) or less”, and use

screws provided with the outlet box. An outlet box

commonly used for the support of lighting xtures may

not be acceptable for fan support and may need to be

replaced. If in doubt, consult a qualied electrician.

If your ceiling fan does not have an existing UL-listed mounting

box, then install one using the following instructions:

□Disconnect the power by removing the fuses or turning off

the circuit breakers.

□Secure the outlet box directly to the building structure. Use

the appropriate fasteners and materials. The outlet box and

support structure must be securely mounted and capable of

reliably supporting 35 lbs. (15.9 kg). Use only UL Listed outlet

boxes marked “Acceptable for Fan Support of 35 lbs. (15.9 kg)

or less.” Do not use a plastic outlet box.

The illustrations below show two different ways to mount the

outlet box.

To hang your fan where there is an existing xture but no ceiling joist,

you may need an installation hanger bar as shown above

(available at any Home Depot store).

Outlet Box

Hanger Bar

7HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly - Hanging the Fan

Hanging the fan-motor assemblyAttaching the fan to the electrical

box

□Turn the power off.

□Securely attach the mounting plate (A) to the outlet box (EE)

using the two screws (FF) supplied with the outlet box (EE).

Pull the 120-volt supply wires (the black, white and ground

wires) out of the outlet box (EE) and through the hole in the

mounting plate (A) and lay them to the side.

□Carefully lift the fan-motor assembly (B) and engage the

slot in the motor bracket on the top of the fan- motor

assembly (B) with the hook on the mounting plate (A) so

that it is securely suspended. Then connect the wiring

to your fan according to step 3 “Making the Electrical

Connections”.

□Once the wiring is completed, lift the fan-motor assembly

(B).

□Align the holes in the mounting plate (A) with the pre-

attached screws (HH) on the motor bracket (II).

□Securely tighten the screws (HH).

NOTE: For better fan performance, make sure the

mounting plate is level. Additional washers (FF)

(not included) may be needed to insert between

the outlet box and mounting plate.

WARNING: To avoid possible electrical shock,

turn the electricity off at the main fuse box before

wiring. If you feel you do not have enough electrical

wiring knowledge or experience, contact a licensed

electrician.

Assembly - Hanging the Fan (continued)

Completing the fan assemblyMaking the electrical connection

□Remove two of the four screws (located diagonally

from each other) (PP) from the top of the mounting

plate (A) and loosen the other two screws (PP).

□Align the two key slots in the top of the motor

housing (C) with the two loose screws (PP) on the

mounting plate (A). Push the motor housing (C) up

and turn it clockwise to lock in the mounting plate

(A). Tighten the two screws.

□Install the two screws that were removed at the

beginning of this step into the remaining two holes

and tighten the four screws rmly.

Outlet box

in the ceiling

Green or bare wire

Green

White

Black

WhiteBlack & Blue

APP

IMPORTANT: Use the plastic wire connectors (AA) supplied with

your fan. Secure the connectors with electrical tape and ensure

there are no loose strands or connections.

WARNING: Each wire not supplied with this fan is designed to

accept up to one 12-gauge house wire and two wires from the

fan. If you have larger than 12-gauge house wiring or more

than one house wire to connect to the fan wiring, consult an

electrician for the proper size wire nuts to use.

□Connect the fan motor green wires to the household green

or bare wire using a wire connecting nut (AA).

□Connect the fan motor white wire to the household white

wire using a wire connecting nut (AA).

□Connect the fan motor black and blue wires to the

household black wire using a wire connecting nut (AA).

□Secure each wire connecting nut using electrical tape.

□Turn the wire connecting nut (AA) upward and push the

wiring into the outlet box (EE).

WARNING: Remove the rubber motor stops on the bottom of the

fan before installing the blades or testing the motor.

9HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly - Attaching the Fan Blades and Brackets

Fastening the blade brackets to

the motor

□Mount the fan blade (E) to the blade bracket (F) by aligning

the three key-slot holes in the blade (E) with the three posts

(RR) on the top of the blade bracket (F).

□Hold the blade (E) with both hands close to the blade

bracket (F) down rmly. Ensure the key-slot holes are

properly seated on the blade bracket posts (RR).

□While still holding the blade (E) down with both hands, rmly

slide the blade (E) until it engages in the locking mechanism

(SS). Make sure the locking mechanism (SS) at the rear of

the blade bracket (F) springs upward and butts against the

edge of the blade (E), indicating a secure connection.

□Visually inspect the top of the blade bracket (F) to ensure

the locking mechanism (SS) is securely in place.

□Repeat this procedure for the remaining blades (E).

Attaching the blades to the blade

brackets

□Fasten the blade brackets (F) to the fan-motor assembly (B)

by inserting the alignment post into the slot on the bottom

of the motor and tightening the pre-installed blade bracket

screws (QQ).

□Repeat this step for the remaining blade assemblies.

NOTE: Your fan blades are reversible. Select the blade side nish

which best accentuates your decor.

Assembly - Attaching the Light Kit Fitter Assembly

Attaching the light kit tter assembly Installing the glass bowl and bulbs

□Remove the three screws (TT) on the switch cup over of the

light kit tter assembly (D).

□Connect the wires from the light kit tter assembly (D) by

connecting the molded adaptor plugs together (blue to black,

white to white). Carefully tuck all wires and splices into the

switch cup.

□Align the three holes in the switch cup cover of the light kit

tter assembly (D) with the three holes in the switch cup

of the fan-motor assembly (B). Make sure the notch in the

switch cup cover of the light kit tter assembly (D) clears

the slide switch in the switch cup of the fan-motor assembly

(D). Position the light kit tter assembly (D) and re-install

the three screws (TT) that were removed in the rst step to

secure the light kit tter assembly (D).

□Remove the nial (UU) and the bottom cover (V V) from the

threaded nipple of the light tter assembly (D).

□With the power off, install the three CFL bulbs (H) by screwing

them into the light bulb sockets.

□Position the glass bowl (G), and direct the fan pull chain through

the side hole of the bottom cover.

□Direct the light pull chain through the hole in the bottom cover

(V V) and nial (UU) guide them over the threaded nipple, and

tighten the nial (UU) securely.

□Attach the pull chain extensions (DD) provided to the light pull

chain and fan pull chain.

7 8

CAUTION: To reduce the risk of electric shock, disconnect

the electrical supply circuit to the fan before installing the

light kit.

DTT

CAUTION: Do not over tighten the hex nut, overtightening

the hex nut may cause the glass to break.

WARNING: Allow the glass shades to cool completely before

removing.

V V

NOTE: Notice the location of the fan’s slide switch. This is the

switch used to change the fan’s directional rotation. For more

information on the operation of this switch, see Operatiing your

fan on page 11.

WARNING: Over lamping the light kit will result in the

lights shutting down until the proper wattage of bulbs are

installed. Reset the lights by turning off the light kit, replace

the bulbs with the correct wattage bulbs, and turn the light

kit back on.

CAUTION: Make sure the power is off before attaching or

removing the glass shades.

This manual suits for next models

Table of contents

Languages:

Other Home Decorators Collection Fan manuals

Home Decorators Collection

Home Decorators Collection MONTEL User manual

Home Decorators Collection

Home Decorators Collection GAMALI 60-FORY User manual

Home Decorators Collection

Home Decorators Collection EMERY YG641H-NI User manual

Home Decorators Collection

Home Decorators Collection CITYVIEW YG814-PN User manual

Home Decorators Collection

Home Decorators Collection BROUGHTON YG671-BN User manual

Home Decorators Collection

Home Decorators Collection GAINSLEY AM655-GM User manual

Home Decorators Collection

Home Decorators Collection PORTWOOD YG528-BN User manual

Home Decorators Collection

Home Decorators Collection BANNERET User manual

Home Decorators Collection

Home Decorators Collection ACWORTH YG623A-MWH User manual

Home Decorators Collection

Home Decorators Collection PORTWOOD YG528-NI User manual

Home Decorators Collection

Home Decorators Collection PINE MEADOWS User manual

Home Decorators Collection

Home Decorators Collection GRAMERCY YG513-BN User manual

Home Decorators Collection

Home Decorators Collection 56049 User manual

Home Decorators Collection

Home Decorators Collection BENTOYGA 51820 User manual

Home Decorators Collection

Home Decorators Collection KENSGROVE YG493OD-ORB User manual

Home Decorators Collection

Home Decorators Collection ARLEIGH User manual

Home Decorators Collection

Home Decorators Collection FAWNDALE 52020 User manual

Home Decorators Collection

Home Decorators Collection 56047 User manual

Home Decorators Collection

Home Decorators Collection BROUGHTON User manual

Home Decorators Collection

Home Decorators Collection 44001-HBC User manual

Home Decorators Collection

Home Decorators Collection JUNEDALE User manual

Home Decorators Collection

Home Decorators Collection TRUDEAU YG545A-EB User manual

Home Decorators Collection

Home Decorators Collection N3121C-MBK User manual

Home Decorators Collection

Home Decorators Collection BETHEL 52-BETL User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual