HiTi Digital WFT510 User manual
1
Table of Contents
1. Checking package contents………………………………………….…2
2. Getting the latest update…………………………………………….….3
3. Introduction of WFT510
3-1.WFT510 Parts……………………………………………………….4
3-2.LED Status…………………………………………………………..4
3-3.System Requirement………………………………………………….4
4. Making WFT510 Ready to Work
4-1. Inserting the Batteries…………………………………………...……5
4-2. Putting WFT510 into WFT510 Carry Bag…………………………………….6
4-3. Turning on WFT510…………………………………………………………….6
5. How to Transmit Image from WFT 510 to HiTi P510Si Printer
5-1. Configuring WFT510 with HiTi P510Si Printer……................................7
5-2. Transmitting Image from Camera to p510Si and printing out image………..9
6. How to Transmit Image from WFT 510 to PC
6-1.Installing WFT PC Kit…………………………………………………………..11
6-2. Building up a network setting for WFT510 via WFT PC Kit……………….. 13
zInfrastructure……………………………………………………………14
zAd-hoc……………………………………………………………………16
6-3. Setting up a network on PC to connect WFT510 (ForAd-hoc Mode)……….18
6-4. Transmitting Image from Camera to PC……………………………………....22
6-5. Test network setting……………………………………………………………..24
6-6. Sub-folder function………………………………………………………………25
7. Specification…………………………………………………………….... 26
2
1. Checking package contents
HiTi Wireless Foto Transmitter WFT510 WFT510 Carry Bag WFT PC Kit CD
USBCable UserManual WarrantyCard
Hook
Note:
1. If something missed from the package, please contact your local dealer or HiTi
service center nearest to you.
2. Batteries are EXCLUDE.
3
2. Getting the latest update
HiTi Digital Inc. website provides the latest driver, application, user’s manual, printer
firmware, and so on for users to download. Please visit our website at www.hiti.com
for more information.
Any questions toward HiTi product(s), please contact your local service center for
detail.
4
3. Introduction of WFT510
3-1. WFT510 Parts
3-2. LED status
Ready=GreenLight Transmit=OrangeLight
Error=RedLight Switch=BlueLight
Status Ready Error Transmit Switch
Power On O(on) X(off) X(off) X(off)
Under PictBridge Mode O(on) X(off) X(off) O(on)
USB connected error O(on) O(on) X(off) X(off)
Camera transmit data to WFT510 O(on) X(off) X(off) Q(blink)
WFT510 transmit data to host O(on) X(off) Q(blink) X(off)
Transmit error O(on) O(on) X(off) X(off)
Battery Low Q(blink) X(off) X(off) X(off)
Change battery X(off) O(on) X(off) X(off)
Notice: When the batteries are lower than certain level, Error LED (Red) will
turn on. Please change batteries, otherwise Error LED will keep turning on.
3-3. System Requirements
_Intel Pentium or compatible PC _100MB or freer hard disk space
_Windows 2000/XP/Vista (32 bit) _CD-ROM or DVD-ROM drive
_128MB RAM or higher
Switch Button
Power Switch
Status LED
Antenna
Camera USB Slot
PC/Printer USB Slot
5
4. Making WFT510 Ready to Work
4-1 Inserting Batteries
zPushing up the battery chamber cover of WFT510
zInserting 4 rechargeable (Recommend) or alkaline AA batteries.
WARNING: DO NOT MIX rechargeable and alkaline batteries. This can cause
leakage or rupture, resulting in personal injury or property damage.
zPulling down the battery chamber cover of WFT510
6
Battery Life:
In order to maximize WFT510 performance, HiTi strongly recommend using
rechargeable battery.
The following measurement s are performed at a temperature 20℃ (68℉) and
humidity 40%. HiTi WFT510 works with test device. Actual battery life could be varied by
different cameras and different batteries.
Type of rechargeable battery Consecutively work Standby
2700 Amp 3.5 hours 4.5 hours
2500 Amp 3 hours 4 hours
4-2. Putting WFT510 into WFT510 Carry Bag
WFT510 carry bag provides 3 ways to carry WFT510
Carrybystrap Hangonbyhook Fastenbybelt
4-3. Turning on WFT510
zPush Power Switch on WFT510 from [OFF] to [ON] and then all LED will turn
on at the same time. Waiting around 25 seconds, ONLY READY LED (green) is
on. WFT510 is ready to work.
7
5. How to Transmit Image from WFT 510 to HiTi P510Si Printer
5-1. Configuring WFT510 with HiTi P510Si Printer
Step 2
Select [Advanced Setting]
Select [Wireless for Camera] and Press ( ) button
switch [OFF] to [ON]
Press (×) button and screen will return to main menu
Step 3
Wait until wireless camera icon show up
Press ( ) button and enter [Network Settings]
Step 4
Press ( ) button
Step1
Turn on P510Si
Select [Settings] and press ( ) button
8
WARNING: Tow or above P510Si printers at one place MUST select different SSID.
Otherwise, WFT510 could transmit image to wrong printer due to same SSID
Step 6
Press ( ) button
Step 7
Select [WFT510 icon] and press ( ) button
Step 8
Transmitter configuration screen show up
DO NOT press ( ) button at this moment
Step 5
Select SSID and press ( ) button
Step 9
Using USB cable* connect WFT510 to P510Si and
then press ( ) button
*Please use USB cable attached with WFT510
9
5-2. Transmitting Image from Camera to P510Si and Printing out Image
Step 10
P510Si will automatically configure with WFT510
Step1
Use USB cable* to connect WFT510 and camera
*Please use USB cable attached with camera
Step 2
Capture images
Step 3
Click SWITCH button on WFT510
Step 11
Press (×) button to exit and WFT510 will reboot
Please wait until ONLY Green LDE is on
WFT510 is ready to work with P510Si
10
** This procedure could be varied by camera.
For example, Nikon D200/Canon S3 can switch to PictBridge Mode at Shooting
mode. Canon 40D MUST be at Playback mode and then can switch to PictBridge
Mode.
Please check camera user manual “PictBridge Mode” part.
Step 4
Camera will switch to PictBridge Mode**
Choose images and transmit them to WFT510
Step 7
After receiving the image from WFT510, P510Si will print
out the photo immediately
Step 5
Switch LED (blue) blinking means WFT510 is
receiving image from camera
Step 6
Transfer LED (orange) blinking means WFT510 is
transmitting image to P510Si
Table of contents
Popular Camera Accessories manuals by other brands
Viltrox
Viltrox EF-NEX Mount instructions
Calumet
Calumet 7100 Series CK7114 operating instructions
Ropox
Ropox 4Single Series User manual and installation instructions
Cambo
Cambo Wide DS Digital Series Main operating instructions
Samsung
Samsung SHG-120 Specification sheet
Ryobi
Ryobi BPL-1820 Owner's operating manual
