Hisense 90L5G User manual

ĉĀ4ą#

āĀĀ4ą#

All material in this Quick Setup Guide is the property of Hisense Company Ltd. and its subsidiaries, and is protected under US,

CANADA, MEXICO and International copyright and/or other intellectual property laws. Reproduction or transmission of the materials,

in whole or in part, in any manner, electronic, print, or otherwise, without the prior written consent of Hisense Company Ltd. is a

violation of Hisense Company Ltd. rights under the aforementioned laws.

No part of this publication may be stored, reproduced, transmitted or distributed, in whole or in part, in any manner, electronic or

otherwise, whether or not for a charge or other or no consideration, without the prior written permission of Hisense Company Ltd.

Requests for permission to store, reproduce, transmit or distribute materials may be made to one of the following addresses:

U.S.A. Hisense USA Corporation

7310 McGinnis Ferry Road

Suwanee, GA 30024

MEXICO

IMPORTER:

Hisense Mexico S. de R.L. de C.V.

Blvd. Miguel de Cervantes Saavedra No 301

Torre Norte Piso 2, Col. Ampliación Granada

Miguel Hidalgo, Ciudad de México, C.P. 11520

RFC: HME110512IY3

TEL: (52) (55) 5531-3515

CANADA Hisense Canada Co., Ltd

2283 Argentia Road, Unit 16

Mississauga, ON, Canada

L5N 5Z2

Hisense, and any and all other Hisense product names, logo’s, slogans or marks are registered trademarks of Hisense Company Ltd.

and its subsidiaries. All other trademarks are the property of their respective holders.

Table of Contents

Important Safety Information 3

Packaged Contents 5

Laser Cinema Diagram 6

STEP 1. Mount the Screen 7

STEP 2. Set up the Laser Cinema 7

STEP 3. Adjust the Display Image and the Screen 10

STEP 4. Use Your Remote 14

STEP 5 Proceed through the Screen Setup Menu 16

Begin to Enjoy Your Laser Cinema 17

Maintenance & Quick Problem-Solving Tips 18

Product Specifications 21

Certification and Compliance 23

Congratulations on the purchase of your new Laser Cinema! This Quick Setup Guide will walk you through

a few easy steps to set up your Laser Cinema.

For detailed instructions, please refer to the E-Manual.

Because we value your business, we want to keep you in the know of 'all things Hisense'. Using your mobile phone, scan the

Registration page QR code to register your Laser Cinema. Depending on the make and model of your phone, you may need to

download a QR code scanning app.

http://www.hisense-usa.com/support/

https://hisense.com.mx/support/register http://www.hisense- canada.com/

support/productReg.asp

U.S. Mexico Canada

Important Safety Information

SAFETY WARNINGS

Do not look directly at the lens when this device is on!

ȼˏ This product comes with a laser module. Do not tear or modify this device in any manner; otherwise, it

may result in personal injury.

RG2

As with any bright light source, DO NOT STARE INTO THE BEAM IEC 62471-5: 2015

CLASS 1 LASER PRODUCT

λ= 455±6nm

Wavelength 455±6nm

CLASS 1 LASER PRODUCT IEC 60825-1: 2014

Caution—use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous

radiation exposure.

The Device Complies with 21 CFR 1040.10 and 1040.11 except for confromance as a Risk Group[0,1 or 2-Select appropriate RG]LIP as

defined in IEC 62471-5: Ed.1.0. For more information see Laser Notice No.57, dated May 8, 2019.

ȼˏ If this device requires a repair, please wear laser eye protection with an optical density OD that is 4 or

higher and has a wave length of 445-465 nm.

ȼˏ Do not place any water-containing vessel on this device, such as cosmetics or liquid medicine.

ȼˏ If any object or water enters this device, please unplug this device and contact the service staff of Hisense.

ȼˏ Do not place any exposed fire source (e.g. burning candle) on this device. Keep away from high temperature and heat.

ȼˏ Do not expose the battery to direct sunlight or candle light.

ȼˏ Keep air vents on both sides clear from any objects to prevent the device from overheating inside.

ȼˏ To avoid a short circuit, product damage or electric shock, do not use any sharp object or metal to touch the ports or other

openings on the Laser Cinema.

ȼˏ If this device has been in a warm environment, allow any built-up condensation to evaporate first BEFORE you switch the device

on.

ȼˏ Do not allow a child to stand on or climb up this device.

ȼˏ Do NOT place any object above or in front of the lens because the laser light could cause the object to become flammable.

ȼˏ Clean the lens periodically with a clean cloth and make sure the Laser Cinema is turned off before you start.

Low Blue light Content

ȼˏ The long-term exposure to blue light may damage your eyes, in particular the retina, causing visual fatigue or eye strain. Children

are particularly vulnerable to excessive blue light and the damage to them is irreversible. The product can decrease blue light ratio

to reduce blue light hazard.

Health recommendations

ȼˏ Avoid long time continuous use product, ensure adequate break time.

ȼˏ Looking at distant objects or exercises for the eye after use product.

ADDITIONAL ITEMS THAT COME WITH THE LASER CINEMA IN A SEPARATE PACKAGE

ȼˏ A Display Screen (optional equipment)*

ȼˏ A set of Wall Mount Brackets (optional equipment)*

*Additional items you receive will be based upon your order.

ȼˏ Laser Cinema

ȼˏ 1 Remote control

ȼˏ 2 AAA batteries

ȼˏ 2 pairs of gloves for handling the Laser Cinema

ȼˏ 1 Power Cord

ȼˏ 1 Wrench to adjust the bottom of the Laser Cinema

ȼˏ 1 Audio Out Cable

ȼˏ Hisense 4K Laser Cinema Quick Setup Guide

ȼˏ Important Safety Information & Warranty Card

ȼˏ Cleaning kit for the lens

ȼˏ 2 C-shaped blocks

ȼˏ C-shaped Block Installing Instruction

ȼˏ 1 USB extension cable

Packaged Contents

We strongly recommend that two people handle this device when moving it from one place to another. Be

sure to protect the lens when you handle this device.

Laser Cinema Diagram

Power

Indicator

Remote control receiver

Air vents

Eye

protection

sensor Power buttonLens with laser

STEP 2 Set up the Laser Cinema

To begin setting up the Laser Cinema, we strongly recommend that TWO people move it from one place

to another because of the weight. Be sure to protect the lens when you handle this device.

STEP 1 Mount the Screen

If you purchased a screen from Hisense to include with your Laser Cinema, then refer to the Screen

Installation Guide that’s included in the package.

1. Now, to get started, we recommend that you connect all cables to the

ports on the back of the Laser Cinema before you position it. (Audio,

video, Ethernet cables and external devices are not included.)

2. Position the Laser Cinema so it is parallel with the screen surface.

We recommend the distance from the back panel of the Laser

Cinema to the wall to be 8 1/8 inches.

3. Plug the power cord into a wall outlet.

4. Press the POWER button to turn on the Laser Cinema.

Power Cord

Wall Outlet

8 in8 in

2 in

WARNING: Insufficient ventilation space will cause this

device to overheat or become damaged.

ȼˏ Do not block the air vents or place any object on this device.

ȼˏ Do not place this device in any narrow, enclosed or poorly

ventilated space.

At a minimum, leave the amount of space shown in the diagram

below for this device to have proper ventilation.

Laser beam

Check to ensure that you have selected the right cables for the ports and that they are connected securely. Loose connections can

affect the quality of the picture image and color.

VHF/UHF Antenna

Cable

ANT OUT

Coaxial

Outdoor VHF/UHF antenna

Ports to connect certain cables to

NOTE:

Use the USB extension cable (included) for easier connection and

disconnection.

When connecting a hard disk or a USB hub, always connect the mains

adapter of the connected device to the power supply. Exceeding a total

current consumption may result in damage. The USB2.0 device maximum

current consumption is 500mA. The USB3.0 device maximum current

consumption is 1A.

If the impulse current for an individual non-standard high-capacity mobile

hard disk is greater than or equal to 1A, it may cause the Laser Cinema to

reboot or lock.

The USB port supports a voltage of 5V.

Ethernet (you will need a router for Internet connectivity)

USB devices for browsing photos, music and movies. This unit only recognizes USB

Memory Sticks.

This manual suits for next models

Table of contents

Other Hisense Smart TV manuals

Popular Smart TV manuals by other brands

Samsung

Samsung The Sero LS05T user manual

Philips

Philips 55PFL6900 quick start

LG 28TK420S Quick setup guide

FFALCON

FFALCON SF3 Series Operation manual

Toshiba

Toshiba 43LL3C63DB quick start guide

EKO

EKO K32FSG11 instruction manual

Tesla

Tesla TSL-TV-T2KYD55 Safety Notice and Installation Guide

Philips

Philips 32PFS6401/12 user manual

Vizio

Vizio Quantum Pro VQP75C-84 user manual

ALDI

ALDI Bauhn ATV40FHDG-0322 user manual

TCL

TCL fire TV 65Q650F user guide

LG 47LA690S.AEE Quick setup guide

RCA

RCA Roku TV RTRU6027-US user guide

EKO

EKO K700UGT instruction manual

Gazer

Gazer TV22-HS2 user manual

Samsung

Samsung UN48J5200AF Guide

Samsung

Samsung Q95T Series user manual

Regal

Regal 55R6080U operating instructions