Hioki SP7002 User manual
Instruction Manual
EN
July 2021 Revised edition 1
SP7001A961-01 21-07H
Be sure to read this manual before using the instrument. p.7
When using the instrument for the
rst time Troubleshooting
Part Names and Functions p.10 Maintenance and Service p.43
Preparing Before Use p.15
Functionality p.27
SP7001
SP7002
NON-CONTACT CAN SENSOR
SP7150
CAN INTERFACE
SP7100
SP9250
SIGNAL PROBE
SP9200
HIOKI SP7001A961-01
5 Commonwealth Ave
Woburn, MA 01801
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
HIOKI SP7001A961-01
i
4 Specications 31
4.1 SP7001/SP7002 Non-Contact
CAN Sensor ..........................................31
4.2 SP7100 CAN Interface ........................34
4.3 SP7150 CAN Interface ........................37
4.4 SP9200 Signal Probe ..........................40
4.5 SP9250 Signal Probe ..........................41
4.6 SP9900 Split Cable
(dedicated option for SP7100)............42
5 Maintenance and Service43
5.1 Troubleshooting ....................................45
CAN signal detection is unstable. ..............45
You are unable to detect CAN signals
stably when using the product in an
environment where it is exposed to
vibrations, for example in road testing........46
Contents
Introduction........................................................1
About the Notations Used in This Manual.....2
Verifying Package Contents............................3
Options.......................................................5
Operating Precautions .....................................7
1 Overview 9
1.1 Product Overview and Features...........9
1.2 Part Names and Functions .................10
SP7001/SP7002 Non-Contact CAN
Sensor .....................................................10
SP7100 CAN Interface..............................11
SP7150 CAN Interface..............................12
SP9200 Signal Probe................................13
SP9250 Signal Probe................................13
1.3 LED Lighting/Flashing
Specications........................................14
2 Preparing Before Use 15
2.1 Preparations..........................................15
2.2 Connecting the Signal Probes............16
2.3 Connecting the Non-Contact CAN
Sensor....................................................17
2.4 Connecting the Ground Terminal .......18
2.5 Connecting the CAN Interface............20
2.6 Supplying Power...................................21
2.7 Connecting the Signal Probes to
the CAN bus..........................................22
When using the SP9200 ...........................22
When using the SP9250 ...........................24
2.8 Inspecting the Product Before Use ....25
3 Functionality 27
3.1 Switching the Non-Contact CAN
Sensor’s Signal Detection
Sensitivity...............................................27
3.2 Probe Setting Function
(Automatic Polarity Selection) ............28
3.3 Output Bus Error Detection
Function .................................................29
SP7001A961-01
HIOKI SP7001A961-01
Contents
ii
HIOKI SP7001A961-01
1
Introduction
Introduction
Thank you for choosing the Hioki SP7001/SP7002 Non-Contact CAN Sensor, SP7100/SP1750
CAN Interface, and SP9200/SP9250 Signal Probe. Keep this manual accessible so that you can
take full advantage of the product’s functionality throughout its service life.
Be sure to review the following documentation before using the product:
Document Content Paper edition Electronic
edition
Instruction Manual
(this manual)
The Instruction Manual contains detailed
instructions about how to use the
product.
The most recent version can be
downloaded from Hioki’s website.
–
Quick Start Manual The Quick Start Manual provides a brief
overview of how to use the product. –
Operating Precautions
(0990A905)
“Operating Precautions” contains
important information about how to use
the product safely.
–
Familize yourself with the separate document entitled Operating Precautions and Quick Start
Manual before using the product.
Communications standards
The Non-Contact CAN Sensor supports the following communications standards:
Model Communications standards
SP7001
SP7002 –
Target audience
This Instruction Manual has been written for users of the product and individuals who will instruct
others on how to use the product.
It assumes that the reader has basic knowledge about electricity (at the level one would obtain from
completing an electrical program at a technical high school).
Use of the product
Before using the product, review proper handling of the product, bus systems, and related systems.
Only individuals who understand both safe product use and the potential impacts arising from
using the product should use the product. Use of the product by others may cause bodily injury or
damage to the product or other devices.
HIOKI SP7001A961-01
2
About the Notations Used in This Manual
About the Notations Used in This Manual
Safety notations
This manual classies seriousness of risks and hazard levels as described below.
WARNING Indicates the possibility of serious injury or death.
CAUTION Indicates the likelihood of minor injury or equipment damage or failure.
IMPORTANT Indicates information or content that is particularly important from the standpoint
of operating or maintaining the product.
Indicates useful advice concerning product performance and operation.
Indicates an action that must not be performed.
Indicates an action that must be performed.
Symbols on equipment
Indicates the need for caution or the presence of a hazard. For more information
about locations where this symbol appears on product components, see “Operating
Precautions” (p.7), warning messages listed at the beginning of operating
instructions, and the document entitled “Operating Precautions” that comes with the
product.
Symbols related to standards
Indicates compliance with the Waste Electrical & Electronic Equipment (WEEE)
Directive in EU member countries.
Indicates compliance with EU directives.
Other symbols
*Instructs the reader to see below for more information.
(p. ) Indicates the page number to reference.
Bold Operation keys are printed in bold.
HIOKI SP7001A961-01
3
Verifying Package Contents
Verifying Package Contents
Before using the product, inspect it for any damage that may have occurred during shipment.
Exercise particular care with regard to accessories, panel switches, and terminals. Contact your
authorized Hioki distributor or reseller if you nd any damage or if the product fails to operate to its
specications.
SP7001/SP7002 Non-Contact CAN Sensor
SP7001 ×1 SP7002 ×1
or
Quick Start Manual
Japanese and English ×1 each
Operating Precautions (0990A905) ×1
SP7100 CAN Interface
SP7100 ×1
L9500 Power Cable ×1
(For connecting an external battery;
terminates in wires; approx. 2 m long)
Refer to p.21.
Spiral tube ×1
(For securing the power cable in place)
Refer to p.21.
Alligator clip ×1
Refer to p.18.
Ground connection cable (1.5 m) ×1
Refer to p.18.
Quick Start Manual
Japanese and English ×1 each
Operating Precautions (0990A905) ×1
HIOKI SP7001A961-01
4
Verifying Package Contents
SP7150 CAN Interface
SP7150 ×1
Quick Start Manual
Japanese and English ×1 each
Operating Precautions (0990A905) ×1
L9510 USB Cable ×1
(Type-A Type-C; for power supply;
1 m long)
Refer to p.21.
Spiral tube ×1
(For securing the power cable in place)
Refer to p.21. Ground connection cable (1.5 m) ×1
Refer to p.18.
Alligator clip ×1
Refer to p.18.
SP9200 Signal Probe
Signal Probe ×2
SP9250 Signal Probe
Signal Probe ×2
HIOKI SP7001A961-01
5
Verifying Package Contents
Options
The following options are available for the product. To purchase an option, please contact your
Hioki’s distributor or reseller.
Options are subject to change. Please check Hioki’s website for the latest information.
SP7001 Non-Contact CAN Sensor
Refer to p.17.
SP7002 Non-Contact CAN Sensor
Refer to p.17.
SP7100 CAN Interface
Refer to p.20.
SP7150 CAN Interface
Refer to p.20.
SP9200 Signal Probe
Refer to p.16.
SP9250 Signal Probe
Refer to p.16.
HIOKI SP7001A961-01
6
Verifying Package Contents
Z1008 AC Adapter (for SP7100 only)
Refer to p.21.
Z1013 AC Adapter (for SP7150 only)
Refer to p.21.
L9500 Power Cable (for SP7100 only)
(For connecting an external battery; terminates in wires;
approx. 2 m long)
Refer to p.21.
L9510 USB Cable (for SP7150 only)
(Type-A Type-C; for power supply; 1 m long)
Refer to p.21.
SP9900 Split Cable (for SP7100 only)
Refer to p.20.
C1013 Carrying Case
Options can be purchased via authorized Hioki distributor or reseller.
HIOKI SP7001A961-01
This manual suits for next models
6
Table of contents
Other Hioki Accessories manuals
