Hinkley Grander User manual

60" GRANDER ™

CEILING FAN INSTRUCTION MANUAL

INDOOR FAN

DC MOTOR

SO WE’RE HERE IF YOU HAVE A QUESTION, NEED SOME

HELP OR WANT TO CHAT ABOUT OUR PRODUCTS. SEND

SUGGESTIONS OUR WAY TOO—WE’RE ALWAYS LOOKING TO

MAKE YOUR EXPERIENCE WITH HINKLEY A POSITIVE ONE.

This manual contains complete instructions for the

installation and operation of this fan. It has been

designed to make the installation process as easy as

possible. If you are unfamiliar or uncomfortable with

wiring, please contact a qualiﬁed electrician. If you

need additional assistance or have any questions,

please reach out to us.

For warranty information, visit hinkley.com.

> SERVICE@HINKLEY.COM

> 800.HINKLEY

> LET’S SEE THAT HINKLEY STYLE @HINKLEY

#HINKLEYSTYLE

WE WANT YOU TO LOVE YOUR NEW FAN

WARNING:

Read and follow these instructions carefully and be mindful of all warnings shown throughout.

TABLE OF CONTENTS

02 GENERAL INSTALLATION & OPERATING

INSTRUCTIONS

03 IMPORTANT SAFETY PRECAUTIONS

03 TOOLS & MATERIALS REQUIRED

04 UNPACKING YOUR FAN

05 PREPARATION

05 INSTALLING THE HANGING BRACKET

06 HANGING THE FAN

08 ELECTRICAL CONNECTIONS

09 FINISHING THE INSTALLATION

10 BLADE ATTACHMENT

11 INSTALLATION OF THE REMOVABLE SWITCH HOUSING

12 INSTALLING THE WALL CONTROL

13 OPERATION

15 CARE AND CLEANING

15 TROUBLESHOOTING

16 ENERGY GUIDE

SPECIFICATIONS

SMART BY BOND

GENERAL INSTALLATION & OPERATION INSTRUCTIONS

02 |hinkley.com

To ensure the success of the installation, be sure to read the instructions and review the diagrams thoroughly before beginning.

To avoid possible electric shock, be sure electricity is turned oﬀ at the main power box before wiring. All electrical connections

must be made in accordance with local codes, ordinances and/or the National Electric Code. If you are unfamiliar with the

methods of installing electrical wiring and products, secure the services of a qualiﬁed and licensed electrician as well as

someone who can check the strength of the supportive ceiling members and make the proper installation(s) and connections.

WARNING: To reduce the risk of ﬁre, electric shock, or other personal injury, mount fan only on an outlet box or supporting system

marked acceptable for fan support of 35 lbs (15.9 kg) or less and use mounting screws provided with the outlet box. Most outlet

boxes commonly used for the support of lighting ﬁxtures are not acceptable for fan support and may need to be replaced.

Consult a qualiﬁed electrician if in doubt.

Make sure that your installation site will not allow rotating fan blades to come in contact with any object. Blades should be at least

7 feet from ﬂoor.

Blades should be attached after motor housing is hung and in place. Fan motor housing should be kept in the carton until ready

to be installed to protect its ﬁnish. If you are installing more than one ceiling fan, make sure that you do not mix fan blade sets, as

each blade is part of a weighted set.

After making electrical connections, spliced conductors should be turned upward and pushed carefully up into outlet box. The

wires should be spread apart with the common conductor and the grounding conductor on one side of the outlet box, and the

"HOT" wires on the other side.

Electrical diagrams are for reference only. Light kits that are not packed with the fan must be UL listed and should be installed

per the light kit's installation instructions.

After fan is completely installed, check to make sure that all connections are secure to prevent fan from falling and/or causing

damage or injury.

The fan can be made to work immediately after installation - the bearings are adequately charged with grease so that, under

normal conditions, further lubrication should not be necessary for the life of the fan.

To operate the reverse function on this fan, press the reverse button while the fan is running.

IMPORTANT SAFETY PRECAUTIONS

TOOLS & MATERIALS REQUIRED

WARNINGS:

• PHILLIPS SCREWDRIVER

• FLAT SCREWDRIVER

• WRENCH OR PLIERS

• WIRE CUTTER

• STEPLADDER

• WIRING SUPPLIES AS REQUIRED BY

ELECTRICAL CODE

• Disconnect power by removing fuse or turning oﬀ circuit breaker before installing the fan and/or optional lighting.

• Support directly from building structure.

• To reduce the risk of ﬁre, electric shock or personal injury, mount to outlet box marked "acceptable for fan support" and use mounting

screws provided with the outlet box. Most outlet boxes commonly used for the support of lighting ﬁxtures are not acceptable for fan

support and may need to be replaced. Consult a qualiﬁed electrician if in doubt.

• Do not use an incandescent light dimmer. Do not use this fan with any transformer type fan speed control device.

• To reduce the risk of personal injury, do not bend the blade arms when installing them, balancing the blades or cleaning the fan.

Do not insert any object(s) between rotating fan blades.

NOTE:

The important precautions, safeguards and instructions appearing in this manual are not meant to cover all possible conditions

and situations that may occur. It must be understood that common sense, caution and carefulness are factors which cannot be

built into this product. These factors must be supplied by the person(s) installing, caring for and operating the unit.

UNPACKING YOUR FAN

UNPACK YOUR FAN AND CHECK THE CONTENTS.

04 |hinkley.com

GRANDER PACKAGE CONTENT

1 Blade Set of 5

2Hanging Bracket

3Ceiling Canopy and Trim Ring

• Do not discard the carton. If warranty replacement or repair is ever necessary, the fan should be returned in original packing.

Remove all parts and hardware. Do not lay motor housing on its side, or the decorative housing may shift, be bent or damaged.

• Examine all parts. You should have the following:

NOTE: Design of parts shown above may look slightly diﬀerent for

your speciﬁc model of fan.

Downrod Asm.

Yoke Cover

Blade Arms

Mounting Plate

Detachable Switch Housing

Receiver Incl. 5 Wire Nuts

Wall Plate, Face Plate,

2 Sets of Mounting Screws,

and Machine Screws

Hardware Bag

Fan Housing with Motor

*Remove rubber shipping

supports around motor, if

applicable. Save the screws.

Bracket Mounting Hardware

(wood screws, screws, lock

washers, washers, wire nuts),

Blade to Blade Arm Screws and

Fiber Washers,

Balance Kit

Wall Control w/12v Battery

PREPARATION

INSTALLING THE HANGING BRACKET

PREPARATION:

Parts identiﬁcation on assembled fan.

Ceiling Fan

Outlet Box

Hanger

Bracket

Outlet Box

Screw

Flat Washer

Spring Washer

Fig. 1

Verify you have all parts before beginning

the installation. Check foam insert closely for

missing parts. Remove motor from packing.

To avoid damage to ﬁnish, assemble motor

on soft padded surface or use the original

foam inset in motor box.

DO NOT LAY MOTOR HOUSING ON ITS SIDE

AS THIS COULD RESULT IN SHIFTING OF

MOTOR IN DECORATIVE ENCLOSURE.

CAUTION: To avoid possible electrical shock, be sure electricity is turned oﬀ

at the main power box before wiring. All wiring must be in accordance with

National and Local Electrical Codes and the ceiling fan must be grounded as

a precaution against possible electric shock.

Locate ceiling joist where fan is to be mounted, being sure location

agrees with the requirements in the minimum clearance section of this

guide. Wood joists must be sound and of adequate size to support 35

pounds (See page 2, items 3 and 4).

If not already present, mount a UL listed outlet box marked "suitable for

fan support" following the instructions provided with the outlet box. The

outlet box must be able to support a minimum of 35 pounds.

Attach hanging bracket to outlet box using screws provided with the

outlet box.

Blade

Yoke Cover

Downrod

Canopy

Motor Housing

HANGING THE FAN

06 |hinkley.com

Fig. 2

Fig. 1

Fig. 3

Downrod

Cross pin

Hanger

ball Set Screw

Screws

Remove two yoke cover screws from the yoke cover on top

of the fan motor assembly. Take oﬀ the yoke cover. (Fig. 1)

Remove ball from downrod by loosening set screw in the

side of the ball. Slide ball down and remove ball pin; remove

ball. (Fig. 2)

Carefully support fan body (motor) in its styrofoam packing

with the mounting collar (where the wires come out) facing

upward.

Loosen the two security set screws and remove the downrod

pin and retaining clip from the coupling on top of the motor

assembly. (Fig. 3)

Carefully feed the electrical lead wires from the fan through

the downrod. Thread downrod into coupler until holes align.

Insert downrod pin through holes in mounting collar and

downrod; clip cotter pin through small hole in end of

downrod pin to hold downrod in place.

Tighten security set screws against downrod using a large

ﬂat blade screwdriver to ensure a tight ﬁt against downrod.

Tighten nuts against mounting collar.

Downrod

Hook-up

(3) Wires

Mounting Collar

Downrod Pin

Security Screws

Cotter Pin

Top of

Fan Body

Fig. 4

Registration slot

Fig. 3

Ground Wire

Top of

Fan Body

Hook-up (3) Wires

Yoke Cover

Downrod

Canopy

Hanger ball

Set screw

Cross Pin

Trim Ring Screws

NOTE:

Fan has 6 feet of hook-up wire in case you are using

a long extension downrod.

Slip the yoke cover, trim ring and canopy onto the downrod.

(Fig. 3)

Thread the hanger ball onto the downrod, insert the cross

pin through the downrod and tighten. Tighten the set screw.

Lift ball/downrod/fan into hanger bracket opening.

NOTE: The tab opposite hanger bracket opening should ﬁt

in slot on ball. (Fig. 4)

Make wire connections, (refer to section titled "Electrical

Connections").

Slide canopy up and fasten to hanger bracket with 4 screws

provided.

ELECTRICAL CONNECTIONS

08 hinkley.com

REMEMBER -Turn oﬀ the power! NOTE - Control must be installed within 30 feet of fan.

Use the wire nuts supplied with your fan when making connections. Secure the connectors with electrical tape and make sure there are no loose

connections or wire strands.

Insert the receiver into the ceiling mounting bracket with the ﬂat side of the

receiver facing the ceiling. (Fig. 1) For best performance, make sure the Black

Antenna, on the end of the receiver, remains extended and not tangled with

any of the electrical wires.

2. Make wire connections from the fan to the receiver unit. For this

step use the bundle of 5 wires on the receiver. (Fig. 2)

Connect the YELLOW fan wire to the YELLOW receiver wire.

Connect the GRAY fan wire to the GRAY receiver wire.

Connect the RED fan neutral wire to the RED receiver neutral wire.

Connect the WHITE fan neutral wire to the WHITE receiver neutral wire.

Connect the BLUE fan neutral wire to the BLUE receiver neutral wire.

3. Connect the wiring from the ceiling to the receiver unit. (Use the 2 wire

bundle on the receiver.) Secure with supplied wire nuts.

Connect the BLACK building supply wire to the BLACK receiver wire.

Connect the WHITE receiver neutral wire to the WHITE building neutral

wire.

Connect the COPPER building ground wire to the YELLOW/GREEN fan

ground wire. Also connect the two GREEN wires (from fan) to building

ground wire.

Fig. 2

Fig. 1

Receiver

Hanger

bracket

Receiver

Fan

Outlet box

Ceiling

WH (AC IN)

GRN

GROUND

GRN (downrod)

GRN (hanger bracket)

BLK

BLK (AC IN)

YELLOW/GRN

BLUE (to motor)

WHITE (to motor)

RED (to motor)

GRAY (to motor)

YELLOW (to motor)

RED (motor)

WHITE (motor)

GRAY (motor)

BLUE (motor)

YELLOW (motor)

Table of contents

Other Hinkley Fan manuals

Hinkley

Hinkley NEO 905452FMW-LDD User manual

Hinkley

Hinkley SCULPT 80 User manual

Hinkley

Hinkley CHISEL 60 User manual

Hinkley

Hinkley ELI User manual

Hinkley

Hinkley Grander 900672F User manual

Hinkley

Hinkley HOVER FLUSH 900872FMB-LWD User manual

Hinkley

Hinkley MARIN 903160FMM-NDD User manual

Hinkley

Hinkley HOVER FLUSH 52 User manual

Hinkley

Hinkley 60" Hover User manual

Hinkley

Hinkley WINDWARD User manual

Hinkley

Hinkley GLADIATOR ILLUMINATED User manual

Hinkley

Hinkley 54" Collier Series User manual

Hinkley

Hinkley 56 inch HAMPTON User manual

Hinkley

Hinkley HOVER FLUSH 900872FGT-LWD User manual

Hinkley

Hinkley DRAFTSMAN 60 User manual

Hinkley

Hinkley TEMPEST 70" User manual

Hinkley

Hinkley INDY FLUSH 901058FBN-NDD User manual

Hinkley

Hinkley HOVER FLUSH 72 User manual

Hinkley

Hinkley HOVER 900760FMB-LWD User manual

Hinkley

Hinkley 52 TREY User manual

Hinkley

Hinkley INDY MAXX 99 User manual

Hinkley

Hinkley MERRICK 60 User manual

Hinkley

Hinkley 72" ARTISTE User manual

Hinkley

Hinkley HIGHLAND User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual

Litex Industries

Litex Industries E-CGL52CB5C1 installation guide