Hilti R6-22 User manual
1
2
3
4
5
6
7
8
9
10
11
12
13
*2309425* 2309425 English 1
Original operating instructions
1 Information about the documentation
1.1 About this documentation
• Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free
handling and use of the product.
• Observe the safety instructions and warnings in this documentation and on the product.
• Always keep the operating instructions with the product and make sure that the operating instructions
are with the product when it is given to other persons.
1.2 Explanation of symbols
1.2.1 Warnings
Warnings alert persons to hazards that occur when handling or using the product. The following signal words
are used:
DANGER
DANGER !
▶Draws attention to imminent danger that will lead to serious personal injury or fatality.
WARNING
WARNING !
▶Draws attention to a potential threat of danger that can lead to serious injury or fatality.
CAUTION
CAUTION !
▶Draws attention to a potentially dangerous situation that could lead to personal injury or damage to the
equipment or other property.
1.2.2 Symbols in the operating instructions
The following symbols are used in these operating instructions:
Comply with the operating instructions
Instructions for use and other useful information
Dealing with recyclable materials
Do not dispose of electric equipment and batteries as household waste
Hilti Liion battery
Hilti charger
1.2.3 Symbols in illustrations
The following symbols are used in illustrations:
These numbers refer to the illustrations at the beginning of these operating instructions.
The numbering reflects the sequence of operations shown in the illustrations and may deviate
from the steps described in the text.
Item reference numbers are used in the overview illustration and refer to the numbers used in
the key in the product overview section.
These characters are intended to specifically draw your attention to certain points when handling
the product.
2 English 2309425 *2309425*
1.3 Product-dependent symbols
1.3.1 Symbols on the product
The following symbols can be used on the product:
Protection class II (double-insulated)
Only use in enclosed spaces
The power tool supports near-field communication (NFC) technology, which is compatible with
iOS and Android platforms.
Hilti Li-ion battery type series used. Observe the information given in the section headed In-
tended use.
Li-ion battery
If applied on the product, the product has been certified by this certification body for the US and
Canadian markets according to the applicable standards.
1.4 Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Radio R 6-22
Generation 01
Serial no.
2 Safety
2.1 General safety instructions
ATTENTION! Read all instructions. Failure to follow all instructions listed below may result in electric shock,
fire and/or serious injury.
Keep these instructions in a handy yet secure place.
Workplace
▶Ensure that the workplace is well lit.
▶Do not tamper with or attempt to make alterations to the appliance.
▶The appliance is not intended for wall mounting.
▶Keep your work area clean and well lit. Cluttered or poorly lit work areas invite accidents.
Personal safety
▶This product is not intended for use by persons (including children) with physical, sensory or mental
disabilities or persons lacking the appropriate experience and/or knowledge. These persons must receive
instruction in safe handling of the appliance and must be supervised throughout their use of the appliance
by a responsible person.
▶Explain to children that they are not allowed to play with the appliance.
▶Children over 8 years of age must receive instruction in safe handling of the appliance and must be
supervised throughout their use of the appliance by a responsible person.
▶Do not wear jewelry such as rings or chains. Jewelry could cause a short circuit resulting in personal
injury in the form of burns.
▶Avoid touching the contacts.
Battery use and care
▶Observe the special guidelines applicable to the transport, storage and use of Li-ion batteries.
▶Do not expose batteries to high temperatures, direct sunlight or fire.
*2309425* 2309425 English 3
▶Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C.
▶Do not use or charge batteries that have suffered mechanical impact, have been dropped from a height
or show signs of damage. In this case, always contact your Hilti Service.
▶If the battery is too hot to touch it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Contact Hilti Service.
Service
▶Have the appliance serviced by a qualified repair person using only genuine Hilti spare parts. The safety
of the appliance can thus be maintained.
2.2 Battery use and care
▶Comply with the following safety instructions for the safe handling and use of Li-ion batteries.
Failure to comply can lead to skin irritation, severe corrosive injury, chemical burns, fire and/or explosion.
▶Use only batteries that are in perfect working order.
▶Treat batteries with care in order to avoid damage and prevent leakage of fluids that are extremely
harmful to health!
▶Do not under any circumstances modify or tamper with batteries!
▶Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C
(176 °F).
▶Never use or charge a battery that has suffered an impact or been damaged in any other way. Check
your batteries regularly for signs of damage.
▶Never use recycled or repaired batteries.
▶Never use the battery or a battery-operated power tool as a striking tool.
▶Never expose batteries to the direct rays of the sun, elevated temperature, sparking, or open flame. This
can lead to explosions.
▶Do not touch the battery poles with your fingers, tools, jewelry, or other electrically conductive objects.
This can damage the battery and also cause material damage and personal injury.
▶Keep batteries away from rain, moisture and liquids. Penetrating moisture can cause short circuits,
electric shock, burns, fire and explosions.
▶Use only chargers and power tools approved for the specific battery type. Read and follow the relevant
operating instructions.
▶Do not use or store the battery in explosive environments.
▶If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti Service or read the
document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
→ page 10
Read the instructions on safety and use of Hilti Li-ion batteries that you can access by scanning
the QR code at the end of these operating instructions.
4 English 2309425 *2309425*
3 Description
3.1 Overview 1
@Display
;Power button
=Carrying handle
%Antenna
&Knob
(Casing
)Rubber armoring
+Mode button
§Preset button
/Bluetooth button
:Equalizer button
∙Time settings
$USB port
£AUX port
|Battery
¡NFC interface
QBattery compartment
3.2 Intended use
The product described is a cordless jobsite radio. It is designed for playing music as a radio receiver or from
various other devices that can be either paired with the product via Bluetooth or connected to it by an AUX
cable.
• The product is designed for a jobsite environment. Do not expose the product to moisture such as
running water, for example.
• Use the product only indoors.
• For this product, use only Hilti lithiumion batteries of the B 22 series. For this product, Hilti recommends
the use of the batteries stated in the table at the end of these operating instructions.
• For these batteries, use only Hilti chargers of the type series listed at the end of these operating
instructions.
3.3 Items supplied
Jobsite radio, AAA batteries (2 of), operating instructions
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.4 Bluetooth
This product is equipped with Bluetooth (optional).
Bluetooth is a wireless data transfer system by which the two Bluetooth-enabled products can communicate
with each other over a short distance.
This manual suits for next models
1
Table of contents
Languages:
Other Hilti Radio manuals
