HIK VISION DS-1350HMI User manual

DS-1350HMI Mobile Intercom

User Manual (V1.1)

UD.6L0202D2103A02

DS-1350HMI Mobile Intercom

TABLE OF CONTENTS

Chapter 1 Introduction ........................................................................................................................5

1.1 Overview...................................................................................................................................5

1.2 Components ..............................................................................................................................5

1.3 Pin Definition............................................................................................................................6

Chapter 2 Installation...........................................................................................................................7

Chapter 3 Connecting Cables..............................................................................................................8

3.1 Connecting to Mobile Enforcement System .............................................................................8

3.2 Connecting to Mobile DVR......................................................................................................8

Chapter 4 Adjusting Volume ...............................................................................................................9

Chapter 5 FAQ....................................................................................................................................10

DS-1350HMI Mobile Intercom

About this Manual

This Manual is applicable to DS-1350HMI Mobile Intercom.

The Manual includes instructions for using and managing the product. Pictures, charts, images and all other

information hereinafter are for description and explanation only. The information contained in the Manual is

subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the

company website.

Please use this user manual under the guidance of professionals.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH

ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND

ERRORS, AND OUR COMPANY MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A

PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL OUR

COMPANY, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY

SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,

DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR

DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF OUR COMPANY

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE

WHOLLY AT YOUR OWN RISKS. OUR COMPANY SHALL NOT TAKE ANY RESPONSIBILITES FOR

ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER

ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;

HOWEVER, OUR COMPANY WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR

JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS

THE APPLICABLE LAW. OUR COMPANY SHALL NOT BE LIABLE IN THE EVENT THAT THIS

PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE

LATER PREVAILS.

DS-1350HMI Mobile Intercom

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE" and comply

therefore with the applicable harmonized European standards listed under the EMC Directive

2004/108/EC, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper recycling, return this product to your local

supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection

points. For more information see: www.recyclethis.info

2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted

municipal waste in the European Union. See the product documentation for specific battery

information. The battery is marked with this symbol, which may include lettering to indicate

cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a

designated collection point. For more information see: www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

DS-1350HMI Mobile Intercom

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.

The precaution measure is divided into “Warnings” and “Cautions”

Warnings: Serious injury or death may occur if any of the warnings are neglected.

Cautions: Injury or equipment damage may occur if any of the cautions are neglected.

Warnings

●In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation

and region. Please refer to technical specifications for detailed information.

●Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with

100~240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications for

detailed information.

●Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire

hazard.

●If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then

please contact the service center.

Preventive and Cautionary Tips

Before connecting and operating your device, please be advised of the following tips:

•Ensure unit is installed in a well-ventilated, dust-free environment.

•Keep all liquids away from the device.

•Ensure environmental conditions meet factory specifications.

•Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of dropping it

may cause damage to the sensitive electronics within the unit.

•Power down the unit before connecting and disconnecting accessories and peripherals.

•Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or

equivalent type only. Dispose of used batteries according to the instructions provided by the battery

manufacturer.

Warnings Follow these

safeguards to prevent serious

injury or death.

Cautions Follow these

precautions to prevent

potential injury or material

damage.

DS-1350HMI Mobile Intercom

Chapter 1 Introduction

1.1 Overview

Based on full-duplex mode, DS-1350HMI Mobile Intercom is able to realize two-way audio with clear sound

quality and low noise interference. In addition, it is featured in low power consumption and long transmission

distance.

1.2 Components

DS-1350HMI Mobile Intercom provides one-meter long cable with a six-pin female aviation plug on one side. The

physical interface is shown as below.

Figure 1.1 Physical Interface

A six-meter long adapter cable is provided with one four-pin female aviation plug for connecting to Mobile DVR

and the other six-pin male aviation plug for connecting to intercom. The adapter cable is shown as below.

Figure1.2 Adapter Cable

DS-1350HMI Mobile Intercom

1.3 Pin Definition

Intercom’s Pin Definition

Intercom’s pin definition is shown as the following table.

Figure 1. 1 Six-Pin Aviation Plug

Table 1. 1 Intercom’s Pin Definition

No.

Name

No.

Name

Line Out

Power

GND

12 VDC

Line In

Adapter Cable’s Pin Definition

Adapter cable’s six-pin definition has the same meaning with the intercom’s pin definition. For detailed definition,

please refer to Table 1. 1. The pin definition of four-pin female aviation plug connecting to Mobile DVR is shown

as the following table.



2 3

Figure 1. 2 Four-Pin Aviation Plug

Table 1. 2 Adapter Cable’s Pin Definition

No.

Name

No.

Name

Line Out

12 VDC

Line In

GND

DS-1350HMI Mobile Intercom

Chapter 2 Installation

Purpose:

Follow the steps listed below to optimize the intercom’s effects.

Steps:

1. Respectively, two screw holes are on intercom’s sides, and you can use screws to install it on instrument

panel.

2. When installing, make sure the mic is toward the voice source (that is driver).

3. To ensure the best effect, the installation distance is no more than 50 to 100 cm away from the driver.

You are not allowed to disassemble the intercom without the guidance of professionals.

DS-1350HMI Mobile Intercom

Chapter 3 Connecting Cables

Purpose:

DS-1350HMI Intercom is able to cooperate with Mobile DVR and mobile enforcement system. The connection

methods are different, when connecting intercom to these two devices.

3.1 Connecting to Mobile Enforcement System

The host of mobile enforcement system provides one four-pin male aviation plug. Therefore, when connecting

intercom with mobile enforcement system, use the adapter cable’s four-pin female aviation plug to connect to the

four-pin male aviation plug in the mobile enforcement system. The following figure shows the connection method.

Figure 3. 1 Connecting to Mobile Enforcement System

3.2 Connecting to Mobile DVR

Since the Mobile DVR does not provide the four-pin aviation plug, an RS 422 interface is needed in connecting

intercom to mobile DVR. RS 422 is a ten-pin aviation plug. To conduct connection successfully, an extra adapter

cable with ten-pin aviation plug is needed and the adapter cable’s applying code is 101501250. The connection

method is shown as the following figure.

Figure 3. 2 Connecting to Mobile DVR

EXT.DEV

DS-1350HMI Mobile Intercom

Chapter 4 Adjusting Volume

Purpose:

Adopting full-duplex mode, DS-1350HMI Mobile Intercom enables two-way audio after the connection with

mobile DVR or mobile enforcement system is done.

Steps:

1. Press buttons “+”and “-”to adjust the volume which is divided into 5 levels.

2. When pressing the volume button to adjust the volume, the LED indicator flashes for once. When pressing the

volume button with no other operation in 3s, the LED indicator continuously flashes for 3 times, which

indicates the current volume is saved.

3. Press the “+”button to the top level, and then the LED indicator does not flash when pressing “+”again, and

the volume remains at the top level, vice versa.

4. Power the device on for first time, the volume remains at the third level by default. If the volume has been

adjusted during the last use, the volume remains the same with your last settings.

Table of contents

Other HIK VISION Intercom System manuals

HIK VISION

HIK VISION DS-KH7300EY Series User manual

HIK VISION

HIK VISION DS-KM8301 User manual

HIK VISION

HIK VISION KD8023E6 Series User manual

HIK VISION

HIK VISION VDP-H2211 User manual

HIK VISION

HIK VISION DS-KH6320-TDE1 Series User manual

HIK VISION

HIK VISION DS-KH8520-WTE1 User manual

HIK VISION

HIK VISION KH9300A User manual

HIK VISION

HIK VISION DS-KH6320-LE1 User manual

HIK VISION

HIK VISION DS-KIS603-P User manual

HIK VISION

HIK VISION KD94X3 User manual

HIK VISION

HIK VISION DS-KIS701-W-D User manual

HIK VISION

HIK VISION DS-KD9613-FE6 User manual

HIK VISION

HIK VISION ADS-24S-12 1224GPCN User manual

HIK VISION

HIK VISION DS-TVL224 User manual

HIK VISION

HIK VISION DS-KD8003-IME1 User manual

HIK VISION

HIK VISION HYU-559 User manual

HIK VISION

HIK VISION DS-KH3200-L User manual

HIK VISION

HIK VISION DS-KV9503-WBE1 User manual

HIK VISION

HIK VISION DS-KH6100-E1 User manual

HIK VISION

HIK VISION DS-KD9403-E6 User manual

HIK VISION

HIK VISION DS-KIS703-P User manual

HIK VISION

HIK VISION DS-KB8112-IM User manual

HIK VISION

HIK VISION DS-KV8413-WME1(B) User manual

HIK VISION

HIK VISION DS-KH6320Y-WTPE2 User manual

Popular Intercom System manuals by other brands

Bticino

Bticino LINEA 3000 Installation

MSI

MSI MSI-140 owner's manual

golmar

golmar Stadio Plus instruction manual

CyberData

CyberData 011211 series Installation quick reference

Vidos

Vidos duo M1021 user manual

Vimar

Vimar ELVOX 7539/E Installation and operation manual

SSS Siedle

SSS Siedle BTSV 850-03 operating instructions

Dahua

Dahua VTO Series quick start guide

Elvox

Elvox 5651 Wiring instructions

Videx

Videx VIDEOKIT Series owner's manual

Rocom

Rocom Doortello Business FW T2.05W2.04 user guide

Viking

Viking E-35-EWP product manual

Safeguard Supply

Safeguard Supply LRA-EX1000 user manual

SSS Siedle

SSS Siedle BFCV 850 Series operating instructions

GRD

GRD MAX V2 user manual

Alecto

Alecto ADI-250 user manual

Aiphone

Aiphone IE-8MD Installation & operation manual

Perel

Perel EDB4 user manual