Hercules DJCONTROL INSTINCT User manual
UK
US
GETTING STARTED WITH DJCONTROL INSTINCT AND DJUCED™
UK
US
INSTALLATION
• Run the installer program.
• Follow the instructions.
• Insert the CD-ROM.
1- Channels 1-2 (mix
output) balance
2- Volume on channels
1 (left) and 2 (right)
3- Lock/unlock right and
left channel volume
4- Mute on/o
5- Channels 3-4
(headphones output)
control
6- Main panel
7- Set jog wheels (enable/
disable and set
sensitivity)
7
6
1
2
3
4
5
More information (forum, tutorials, videos...) available at
www.HERCULESDJMIXROOM.com
FRONT PANEL: HEADPHONES
1 - CONNECTING HEADPHONES AND SPEAKERS
REAR PANEL: SPEAKERS
When connecting headphones, make sure that the volume level is suitable for
listening with headphones: start playing a music track before putting on the
headphones, and turn down the volume if it seems that the sound coming
from the headphones is too loud.
UK
US
2 - LOADING YOUR MUSIC
IN DJUCED™
Use the following buttons to browse through folders and les.
Browse through the
list of folders or
through les:
Expand/collapse a
folder's tree
structure:
Access the list
of les in a folder:
2.1 Browse to the location where your music les are stored on your computer.
2.2 After highlighting a track, press Load A to load the track on deck A, or press Load B
to load the track on deck B.
DJUCED™ automatically analyzes the BPM (number of beats per minute) of the track you
have loaded.
DJUCED™ lets you play the most popular audio le formats (mp3, wav, wma, aif...)
if the codec is installed on your computer. Install iTunes, Windows Media Player... if
they are not already installed on your system.
3 - PREVIEWING A TRACK
Previewing lets you prepare the next track to be played (following the track that you
are currently playing for your audience). You can use previewing to beatmatch the
next track to be played, or pause the track at a precise spot so that playback will start
from this exact position. Or you can place a Cue point, which will let you start playback
of the track from that point (please also see section 7 – PLACING A CUE POINT).
3.1 You are playing a track on deck A, and want to preview the next track on deck B.
AB
3.2 Press the button on deck B (the deck on which the track that you want to
preview is loaded).
UK
US
3.4 Start playing the track to be previewed on deck B. Prepare the track (beatmatch
the track, place a Cue point...).
3.3 Adjust the volume on your headphones using
the buttons
B
4 - MIXING TRACKS
Mixing tracks means to link up songs,
one after another, without any gaps or
silences between them.
4.1 You have loaded a track on each deck
(A and B). Position the volume faders as
shown below.
4.2 You start o by playing the track on
deck A.
4.5 Before the end of the track being
played, start playing the track loaded on
deck B.
4.3 Set the crossfader to the side of the
deck on which the track is playing (here,
to the left).
4.4 Select previewing on deck B (please
see 3. Previewing a track).
4.6 To ensure a transition at the same
tempo, synchronize the BPM (number of
beats per minute) of the track that you are
getting ready to play. Here, press the Sync
button on deck B (1) to make the BPM of
this track match the BPM of the track that
will be nishing (on deck A). Or you can
adjust the BPM to match the BPM of the
track on deck A using the pitch stick (2).
4.7 To make the transition, progressively
move the crossfader toward the deck on
which the new track is being played (here,
to the right).
A
B
AB
B
B
1
2
A B
UK
US
5 - SCRATCHING
ON A TRACK
5.1 Press the button to enable
Scratch mode.
5.5 ... and gently turn the jog wheel to
the right and to the left in succession, for
example over 1 or 2 beats.
5.2 Start playing a track loaded on deck A,
for example.
5.3 Place your hand on the jog wheel on
deck A, as shown in the illustration.
5.4 Press down
slightly on the jog
wheel...
A
6 - EFFECTS, LOOPS AND SAMPLES
An eect is a lter (or a combination of lters) which modies the sound: echo,
reverb...
A loop is a part of a track whose beginning and end you dene, and which is played
repeatedly.
A sample is a short sound which can be played on its own or in conjunction with
other samples, either over the music or in place of the music, and can be played
either as a loop, or just one time (this is known as a “jingle”).
6.1 Applying an eect on a track that is
loaded and playing.
Press the button to select Eect
mode.
6.2 Playing a sample on a track that is
loaded and playing.
Press the button to select Sample
mode.
Press a button to apply an eect, or multiple buttons to apply a combination of eects.
The corresponding eect or eects are displayed in DJUCED™.
Press one or more buttons to trigger the
sample(s).
The button's backlighting duration
corresponds to the sample length:
short, for a short sound such as a drum
hit; longer, for a brief sample of music,
for example.
This manual suits for next models
1
Table of contents
Other Hercules Dj Equipment manuals
Hercules
Hercules DJ CONSOLE MK2 User manual
Hercules
Hercules RMX Use and care manual
Hercules
Hercules DJ Control Inpulse 500 User manual
Hercules
Hercules DJ CONTROL MP3 E2 User manual
Hercules
Hercules Mk4 User manual
Hercules
Hercules DJControl Jogvision User manual
Hercules
Hercules UNIVERSAL DJ User manual
Hercules
Hercules DJ CONSOLE User manual
Hercules
Hercules DJControl Inpulse 500 User manual
Hercules
Hercules DJ CONSOLE User manual
Hercules
Hercules 4-Mx User manual
Hercules
Hercules DJ CONSOLE MK2 Installation and user guide
Hercules
Hercules DJ CONSOLE MK2 User manual
Hercules
Hercules DJControl Inpulse 300 MK2 User manual
Hercules
Hercules DJControl Inpulse 300 MK2 User manual
Hercules
Hercules DJCONTROL INPULSE T7 User manual
Hercules
Hercules DJ CONSOLE Dimensions
Hercules
Hercules UNIVERSAL DJ User manual
Hercules
Hercules DJ Console MK2 DJ-1800 User manual
Hercules
Hercules DJ CONSOLE MK2 User manual
